community.network.cnos_vlag – Manage VLAG resources and attributes on devices running Lenovo CNOS

Note

This plugin is part of the community.network collection (version 2.1.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.cnos_vlag.

Synopsis

  • This module allows you to work with virtual Link Aggregation Groups (vLAG) related configurations. The operators used are overloaded to ensure control over switch vLAG configurations. Apart from the regular device connection related attributes, there are four vLAG arguments which are overloaded variables that will perform further configurations. They are vlagArg1, vlagArg2, vlagArg3, and vlagArg4. For more details on how to use these arguments, see [Overloaded Variables]. This module uses SSH to manage network device configuration. The results of the operation will be placed in a directory named ‘results’ that must be created by the user in their local directory to where the playbook is run.

Parameters

Parameter Choices/Defaults Comments
deviceType
string / required
    Choices:
  • g8272_cnos
  • g8296_cnos
  • g8332_cnos
  • NE0152T
  • NE1072T
  • NE1032
  • NE1032T
  • NE10032
  • NE2572
This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032,NE2572 are added since Ansible 2.4. The choice NE0152T is added since 2.8
enablePassword
string
Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
host
string / required
This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured.
outputfile
string / required
This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission.
password
string / required
Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
username
string / required
Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
vlagArg1
string / required
    Choices:
  • enable
  • auto-recovery
  • config-consistency
  • isl
  • mac-address-table
  • peer-gateway
  • priority
  • startup-delay
  • tier-id
  • vrrp
  • instance
  • hlthchk
This is an overloaded vlag first argument. Usage of this argument can be found is the User Guide referenced above.
vlagArg2
string
    Choices:
  • Interval in seconds
  • disable or strict
  • Port Aggregation Number
  • VLAG priority
  • Delay time in seconds
  • VLAG tier-id value
  • VLAG instance number
  • keepalive-attempts
  • keepalive-interval
  • retry-interval
  • peer-ip
This is an overloaded vlag second argument. Usage of this argument can be found is the User Guide referenced above.
vlagArg3
string
    Choices:
  • enable or port-aggregation
  • Number of keepalive attempts
  • Interval in seconds
  • Interval in seconds
  • VLAG health check peer IP4 address
This is an overloaded vlag third argument. Usage of this argument can be found is the User Guide referenced above.
vlagArg4
string
    Choices:
  • Port Aggregation Number
  • default or management
This is an overloaded vlag fourth argument. Usage of this argument can be found is the User Guide referenced above.

Notes

Note

Examples

Tasks : The following are examples of using the module cnos_vlag. These are
        written in the main.yml file of the tasks directory.
---
- name: Test Vlag  - enable
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "enable"

- name: Test Vlag - autorecovery
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "auto-recovery"
      vlagArg2: 266

- name: Test Vlag - config-consistency
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "config-consistency"
      vlagArg2: "strict"

- name: Test Vlag - isl
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "isl"
      vlagArg2: 23

- name: Test Vlag  - mac-address-table
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "mac-address-table"

- name: Test Vlag - peer-gateway
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "peer-gateway"

- name: Test Vlag - priority
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "priority"
      vlagArg2: 1313

- name: Test Vlag - startup-delay
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "startup-delay"
      vlagArg2: 323

- name: Test Vlag  - tier-id
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "tier-id"
      vlagArg2: 313

- name: Test Vlag - vrrp
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "vrrp"

- name: Test Vlag - instance
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "instance"
      vlagArg2: 33
      vlagArg3: 333

- name: Test Vlag - instance2
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "instance"
      vlagArg2: "33"

- name: Test Vlag  - keepalive-attempts
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "hlthchk"
      vlagArg2: "keepalive-attempts"
      vlagArg3: 13

- name: Test Vlag - keepalive-interval
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "hlthchk"
      vlagArg2: "keepalive-interval"
      vlagArg3: 131

- name: Test Vlag - retry-interval
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "hlthchk"
      vlagArg2: "retry-interval"
      vlagArg3: 133

- name: Test Vlag - peer ip
  community.network.cnos_vlag:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType']}}"
      outputfile: "./results/cnos_vlag_{{ inventory_hostname }}_output.txt"
      vlagArg1: "hlthchk"
      vlagArg2: "peer-ip"
      vlagArg3: "1.2.3.4"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
msg
string
always
Success or failure message

Sample:
vLAG configurations accomplished


Authors

  • Anil Kumar Muraleedharan (@amuraleedhar)