community.network.enos_facts – Collect facts from remote devices running Lenovo ENOS

Note

This plugin is part of the community.network collection (version 2.1.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.enos_facts.

Synopsis

• Collects a base set of device facts from a remote Lenovo device running on ENOS. This module prepends all of the base network fact keys with ansible_net_<fact>. The facts module will always collect a base set of facts from the device and can enable or disable collection of additional facts.

Parameters

Parameter		Choices/Defaults	Comments
auth_pass string			Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
authorize boolean		Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
gather_subset string		Default: "!config"	When supplied, this argument will restrict the facts collected to a given subset. Possible values for this argument include all, hardware, config, and interfaces. Can specify a list of values to include a larger subset. Values can also be used with an initial ! to specify that a specific subset should not be collected.
provider dictionary			A dict object containing connection details.
	auth_pass string		Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTH_PASS will be used instead.
	authorize boolean	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_AUTHORIZE will be used instead.
	host string / required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	password string		Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
	port integer	Default: 22	Specifies the port to use when building the connection to the remote device.
	ssh_keyfile path		Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_SSH_KEYFILE will be used instead.
	timeout integer	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	username string		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Notes

Note

• Tested against ENOS 8.4.1

Examples

Tasks: The following are examples of using the module enos_facts.
---
- name: Test Enos Facts
  community.network.enos_facts:
    provider={{ cli }}

  vars:
    cli:
      host: "{{ inventory_hostname }}"
      port: 22
      username: admin
      password: admin
      transport: cli
      timeout: 30
      authorize: True
      auth_pass:

---
# Collect all facts from the device
- community.network.enos_facts:
    gather_subset: all
    provider: "{{ cli }}"

# Collect only the config and default facts
- community.network.enos_facts:
    gather_subset:
      - config
    provider: "{{ cli }}"

# Do not collect hardware facts
- community.network.enos_facts:
    gather_subset:
      - "!hardware"
    provider: "{{ cli }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
ansible_net_all_ipv4_addresses list / elements=string	when interfaces is configured	All IPv4 addresses configured on the device
ansible_net_all_ipv6_addresses list / elements=string	when interfaces is configured	All IPv6 addresses configured on the device
ansible_net_config string	when config is configured	The current active config from the device
ansible_net_gather_subset list / elements=string	always	The list of fact subsets collected from the device
ansible_net_hostname string	always	The configured hostname of the device
ansible_net_image string	always	Indicates the active image for the device
ansible_net_interfaces dictionary	when interfaces is configured	A hash of all interfaces running on the system. This gives information on description, mac address, mtu, speed, duplex and operstatus
ansible_net_memfree_mb integer	when hardware is configured	The available free memory on the remote device in MB
ansible_net_model string	always	The model name returned from the Lenovo ENOS device
ansible_net_neighbors dictionary	when interfaces is configured	The list of LLDP neighbors from the remote device
ansible_net_serialnum string	always	The serial number of the Lenovo ENOS device
ansible_net_version string	always	The ENOS operating system version running on the remote device

Authors

• Anil Kumar Muraleedharan (@amuraleedhar)