community.network.pn_vrouter_ospf – CLI command to add/remove vrouter-ospf¶

Note

This plugin is part of the community.network collection (version 2.1.1).

To install it use: ansible-galaxy collection install community.network.

To use it in a playbook, specify: community.network.pn_vrouter_ospf.

Synopsis
Parameters
Examples
Return Values

Synopsis ¶

This module can be used to add OSPF protocol to vRouter and remove OSPF protocol from a vRouter

Parameters ¶

Parameter	Choices/Defaults	Comments
pn_cliswitch string		Target switch to run the CLI on.
pn_netmask string		OSPF network IP address netmask.
pn_network string / required		OSPF network IP address.
pn_ospf_area string		stub area number for the configuration.
pn_vrouter_name string / required		name of service config.
state string	Choices: present ← absent	vrouter-ospf configuration command.

Examples ¶

- name: Add OSPF to vRouter
  community.network.pn_vrouter_ospf:
    state: 'present'
    pn_vrouter_name: 'sw01-vrouter'
    pn_network: '105.104.104.1'
    pn_netmask: '24'
    pn_ospf_area: '0'
- name: "Remove OSPF to vRouter"
  community.network.pn_vrouter_ospf:
    state: 'absent'
    pn_vrouter_name: 'sw01-vrouter'
    pn_network: '105.104.104.1'

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	indicates whether the CLI caused changes on the target.
command string	always	the CLI command run on the target node.
stderr list / elements=string	on error	set of error responses from the vrouter-ospf command.
stdout list / elements=string	always	set of responses from the vrouter-ospf command.

Authors¶

Pluribus Networks (@rajaspachipulusu17)

community.network.pn_vrouter_ospf – CLI command to add/remove vrouter-ospf¶

Synopsis¶

Parameters¶

Examples¶