community.windows.win_netbios – Manage NetBIOS over TCP/IP settings on Windows.

Note

This plugin is part of the community.windows collection (version 1.3.0).

To install it use: ansible-galaxy collection install community.windows.

To use it in a playbook, specify: community.windows.win_netbios.

Synopsis

  • Enables or disables NetBIOS on Windows network adapters.

  • Can be used to protect a system against NBT-NS poisoning and avoid NBNS broadcast storms.

  • Settings can be applied system wide or per adapter.

Parameters

Parameter Choices/Defaults Comments
adapter_names
list / elements=string
List of adapter names for which to manage NetBIOS settings. If this option is omitted then configuration is applied to all adapters on the system.
The adapter name used is the connection caption in the Network Control Panel or via Get-NetAdapter, eg Ethernet 2.
state
string / required
    Choices:
  • enabled
  • disabled
  • default
Whether NetBIOS should be enabled, disabled, or default (use setting from DHCP server or if static IP address is assigned enable NetBIOS).

Notes

Note

  • Changing NetBIOS settings does not usually require a reboot and will take effect immediately.

  • UDP port 137/138/139 will no longer be listening once NetBIOS is disabled.

Examples

- name: Disable NetBIOS system wide
  community.windows.win_netbios:
    state: disabled

- name: Disable NetBIOS on Ethernet2
  community.windows.win_netbios:
    state: disabled
    adapter_names:
      - Ethernet2

- name: Enable NetBIOS on Public and Backup adapters
  community.windows.win_netbios:
    state: enabled
    adapter_names:
      - Public
      - Backup

- name: Set NetBIOS to system default on all adapters
  community.windows.win_netbios:
    state: default

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
reboot_required
boolean
always
Boolean value stating whether a system reboot is required.

Sample:
True


Authors

  • Thomas Moore (@tmmruk)