f5networks.f5_modules.bigip_data_group – Manage data groups on a BIG-IP¶

Note

This plugin is part of the f5networks.f5_modules collection (version 1.9.0).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_data_group.

New in version 1.0.0: of f5networks.f5_modules

Synopsis
Parameters
Notes
Examples

Synopsis ¶

Allows for managing data groups on a BIG-IP. Data groups provide a way to store collections of values on a BIG-IP for later use in things such as LTM rules, iRules, and ASM policies.

Parameters ¶

Parameter		Choices/Defaults	Comments
delete_data_group_file boolean		Choices: no ← yes	When `yes`, will ensure the remote data group file is deleted. This parameter is only relevant when `state` is `absent` and `internal` is `no`.
description string			The description of the data group.
external_file_name string			When creating a new data group, this specifies the file name you want to give an external data group file on the BIG-IP. This parameter is ignored when `internal` is `yes`. This parameter can be used to select an existing data group file to use with an existing external data group. If this value is not provided, it will be given the value specified in `name` and, therefore, match the name of the data group. This value may only contain letters, numbers, underscores, dashes, or a period.
internal boolean		Choices: no ← yes	The type of this data group. You should only consider setting this value in cases where you know exactly what you are doing, or, you are working with a pre-existing internal data group. Be aware that if you deliberately force this parameter to `yes`, and you have a either a large number of records or a large total records size, this large amount of data will be reflected in your BIG-IP configuration. This can lead to long system configuration load times due to parsing and verifying the large configuration. There is a limit of either 4 megabytes or 65,000 records (whichever is more restrictive) for uploads when this parameter is `yes`. This value cannot be changed once the data group is created.
name string / required			Specifies the name of the data group.
partition string		Default: "Common"	Device partition to manage resources on.
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no yes	If `yes`, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable `F5_TEEM`.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	validate_certs boolean	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
records list / elements=raw			Specifies the records you want to add to a data group. If you have a large number of records, we recommend you use `records_src` instead of typing all those records here. The technical limit of either 1. the number of records, or 2. the total size of all records, varies with the size of the total resources on your system; in particular, RAM. When `internal` is `no`, at least one record must be specified in either `records` or `records_src`. When `type` is: `ip`, `address`, `addr` if the addresses use a non-default route domain, they must be explicit about it, meaning they must contain a route domain notation `%` e.g. 10.10.1.1%11. This is true regardless if the data group resides in a partition or not.
	key string / required		The key describing the record in the data group. The key will be used for validation of the `type` parameter to this module.
	value raw		The value of the key describing the record in the data group.
records_src path			Path to a file with records in it. The file should be well-formed. This means that it includes records, one per line, that resemble the following format "key separator value". For example, `foo := bar`. BIG-IP is strict about this format, but this module is a bit more lax. It will allow you to include arbitrary amounts (including none) of empty space on either side of the separator. For an illustration of this, see the Examples section. Record keys are limited in length to no more than 65520 characters. Values of record keys are limited in length to no more than 65520 characters. The total number of records you can have in your BIG-IP is limited by the memory of the BIG-IP itself. The format of this content is slightly different depending on whether you specify a `type` of `address`, `integer`, or `string`. See the examples section for examples of the different types of payload formats that are expected in your data group file. When `internal` is `no`, at least one record must be specified in either `records` or `records_src`.
separator string		Default: ":="	When specifying `records_src`, this is the string of characters that will be used to break apart entries in the `records_src` into key/value pairs. By default, the value of this parameter is `:=`. This value cannot be changed once it is set. This parameter is only relevant when `internal` is `no`. It will be ignored otherwise.
state string		Choices: present ← absent	When `state` is `present`, ensures the data group exists. When `state` is `absent`, ensures the data group is removed. The use of state in this module refers to the entire data group, not its members.
type string		Choices: address addr ip string ← str integer int	The type of records in this data group. This parameter is especially important because it causes BIG-IP to store your data in different ways to optimize access to it. For example, it would be wrong to specify a list of records containing IP addresses, but label them as a `string` type. This value cannot be changed once the data group is created.

Notes ¶

Note

This module does NOT support atomic updates of data group members in a type internal data group.
Addition/Deletion of data group members in a type external data group should be done through Ansible modules only, if changes are made manually ansible module will not detect those changes.
For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create a data group of addresses
  bigip_data_group:
    name: foo
    internal: yes
    records:
      - key: 0.0.0.0/32
        value: External_NAT
      - key: 10.10.10.10
        value: No_NAT
    type: address
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create a data group of strings
  bigip_data_group:
    name: foo
    internal: yes
    records:
      - key: caddy
        value: ""
      - key: cafeteria
        value: ""
      - key: cactus
        value: ""
    type: str
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Create a data group of IP addresses from a file
  bigip_data_group:
    name: foo
    records_src: /path/to/dg-file
    type: address
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Update an existing internal data group of strings
  bigip_data_group:
    name: foo
    internal: yes
    records:
      - key: caddy
        value: ""
      - key: cafeteria
        value: ""
      - key: cactus
        value: ""
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Show the data format expected for records_content - address 1
  copy:
    dest: /path/to/addresses.txt
    content: |
      network 10.0.0.0 prefixlen 8 := "Network1",
      network 172.16.0.0 prefixlen 12 := "Network2",
      network 192.168.0.0 prefixlen 16 := "Network3",
      network 2402:9400:1000:0:: prefixlen 64 := "Network4",
      host 192.168.20.1 := "Host1",
      host 172.16.1.1 := "Host2",
      host 172.16.1.1 := "Host3",
      host 2001:0db8:85a3:0000:0000:8a2e:0370:7334 := "Host4",
      host 2001:0db8:85a3:0000:0000:8a2e:0370:7334 := "Host5"

- name: Show the data format expected for records_content - address 2
  copy:
    dest: /path/to/addresses.txt
    content: |
      10.0.0.0/8 := "Network1",
      172.16.0.0/12 := "Network2",
      192.168.0.0/16 := "Network3",
      2402:9400:1000:0::/64 := "Network4",
      192.168.20.1 := "Host1",
      172.16.1.1 := "Host2",
      172.16.1.1/32 := "Host3",
      2001:0db8:85a3:0000:0000:8a2e:0370:7334 := "Host4",
      2001:0db8:85a3:0000:0000:8a2e:0370:7334/128 := "Host5"

- name: Show the data format expected for records_content - string
  copy:
    dest: /path/to/strings.txt
    content: |
      a := alpha,
      b := bravo,
      c := charlie,
      x := x-ray,
      y := yankee,
      z := zulu,

- name: Show the data format expected for records_content - integer
  copy:
    dest: /path/to/integers.txt
    content: |
      1 := bar,
      2 := baz,
      3,
      4,

Authors¶

Tim Rupp (@caphrim007)
Wojciech Wypior (@wojtek0806)
Greg Crosby (@crosbygw)

f5networks.f5_modules.bigip_data_group – Manage data groups on a BIG-IP¶

Synopsis¶

Parameters¶

Notes¶