f5networks.f5_modules.bigip_message_routing_protocol – Manage the generic message parser profile.

Note

This plugin is part of the f5networks.f5_modules collection (version 1.9.0).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_message_routing_protocol.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

• Manages the generic message parser profile for use with the message routing framework.

Parameters

Parameter		Choices/Defaults	Comments
description string			The user-defined description of the generic parser profile.
disable_parser boolean		Choices: no yes	When yes, the generic message parser is disabled, ignoring all incoming packets and not directly send message data. This mode supports iRule script protocol implementations that generates messages from the incoming transport stream and sends outgoing messages on the outgoing transport stream.
max_egress_buffer integer			Specifies the maximum size of the send buffer in bytes. If the number of bytes in the send buffer for a connection exceeds this value, the generic message protocol will stop receiving outgoing messages from the router until the size of the size of the buffer drops below this setting. The accepted range is between 0 and 4294967295 inclusive.
max_msg_size integer			Specifies the maximum size of a received message. If a message exceeds this size, the connection will be reset. The accepted range is between 0 and 4294967295 inclusive.
msg_terminator string			The string of characters used to terminate a message. If the message-terminator is not specified, the generic message parser will not separate the input stream into messages.
name string / required			Specifies the name of the generic parser profile.
no_response boolean		Choices: no yes	When set, matching of responses to requests is disabled.
parent string			The parent template of this parser profile. Once this value has been set, it cannot be changed. When creating a new profile, if this parameter is not specified, the default is the system-supplied genericmsg profile.
partition string		Default: "Common"	Device partition to create route object on.
provider dictionary added in 1.0.0 of f5networks.f5_modules			A dict object containing connection details.
	auth_provider string		Configures the auth provider for to obtain authentication tokens from the remote device. This option is really used when working with BIG-IQ devices.
	no_f5_teem boolean	Choices: no yes	If yes, TEEM telemetry data is not sent to F5. You may omit this option by setting the environment variable F5_TEEM.
	password string / required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable F5_PASSWORD. aliases: pass, pwd
	server string / required		The BIG-IP host. You may omit this option by setting the environment variable F5_SERVER.
	server_port integer	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable F5_SERVER_PORT.
	timeout integer		Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	transport string	Choices: rest ←	Configures the transport connection to use when connecting to the remote device.
	user string / required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable F5_USER.
	validate_certs boolean	Choices: no yes ←	If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
state string		Choices: present ← absent	When present, ensures the route exists. When absent, ensures the route is removed.

Notes

Note

• Requires BIG-IP >= 14.0.0

• For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

• Requires BIG-IP software version >= 12.

• The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a generic parser
  bigip_message_routing_protocol:
    name: foo
    description: 'This is parser'
    no_response: yes
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Modify a generic parser
  bigip_message_routing_protocol:
    name: foo
    no_response: no
    max_egress_buffer: 10000
    max_msg_size: 2000
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove generic parser
  bigip_message_routing_protocol:
    name: foo
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
description string	changed	The user-defined description of the parser profile. Sample: My description
disable_parser boolean	changed	Disables generic message parser. Sample: True
max_egress_buffer integer	changed	The maximum size of the send buffer in bytes. Sample: 10000
max_msg_size integer	changed	The maximum size of a received message. Sample: 4000
msg_terminator string	changed	The string of characters used to terminate a message. Sample: %%%%
no_response boolean	changed	Disables matching of responses to requests. Sample: True
parent string	changed	The parent template of this parser profile. Sample: /Common/genericmsg

Authors

• Wojciech Wypior (@wojtek0806)