f5networks.f5_modules.bigip_snmp – Manipulate general SNMP settings on a BIG-IP

Note

This plugin is part of the f5networks.f5_modules collection (version 1.9.0).

To install it use: ansible-galaxy collection install f5networks.f5_modules.

To use it in a playbook, specify: f5networks.f5_modules.bigip_snmp.

New in version 1.0.0: of f5networks.f5_modules

Synopsis

  • Manipulate general SNMP settings on a BIG-IP system.

Parameters

Parameter Choices/Defaults Comments
agent_authentication_traps
string
    Choices:
  • enabled
  • disabled
When enabled, ensures the system sends authentication warning traps to the trap destinations. This is usually disabled by default on a BIG-IP.
agent_status_traps
string
    Choices:
  • enabled
  • disabled
When enabled, ensures the system sends a trap whenever the SNMP agent starts running or stops running. This is usually enabled by default on a BIG-IP.
allowed_addresses
raw
Configures the IP addresses of the SNMP clients from which the snmpd daemon accepts requests.
This value can be hostnames, IP addresses, or IP networks.
You may specify a single list item of default to set the value back to the system default of 127.0.0.0/8.
You can remove all allowed addresses by either providing the word none, or by providing the empty string "".
contact
string
Specifies the name of the person who administers the SNMP service for this system.
device_warning_traps
string
    Choices:
  • enabled
  • disabled
When enabled, ensures the system sends device warning traps to the trap destinations. This is usually enabled by default on a BIG-IP.
location
string
Specifies the description of this system's physical location.
provider
dictionary
added in 1.0.0 of f5networks.f5_modules
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
no_f5_teem
boolean
    Choices:
  • no
  • yes
If yes, TEEM telemetry data is not sent to F5.
You may omit this option by setting the environment variable F5_TEEM.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.

  • Requires BIG-IP software version >= 12.

  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the f5networks.f5_modules.bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Set snmp contact
  bigip_snmp:
    contact: Joe User
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Set snmp location
  bigip_snmp:
    location: US West 1
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
agent_authentication_traps
string
changed
Value of the authentication status traps.

Sample:
enabled
agent_status_traps
string
changed
Value of the agent status traps.

Sample:
enabled
allowed_addresses
list / elements=string
changed
The new allowed addresses for SNMP client connections.

Sample:
['127.0.0.0/8', 'foo.bar.com', '10.10.10.10']
contact
string
changed
The new value for the person who administers SNMP on the device.

Sample:
Joe User
device_warning_traps
string
changed
Value of the warning status traps.

Sample:
enabled
location
string
changed
The new value for the system's physical location.

Sample:
US West 1a


Authors

  • Tim Rupp (@caphrim007)

  • Wojciech Wypior (@wojtek0806)