fortinet.fortios.fortios_firewall_policy6 – Configure IPv6 policies in Fortinet’s FortiOS and FortiGate.¶
Note
This plugin is part of the fortinet.fortios collection (version 1.1.9).
To install it use: ansible-galaxy collection install fortinet.fortios.
To use it in a playbook, specify: fortinet.fortios.fortios_firewall_policy6.
New in version 2.8: of fortinet.fortios
Synopsis¶
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and policy6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements¶
The below requirements are needed on the host that executes this module.
ansible>=2.9.0
Parameters¶
Examples¶
- hosts: fortigates
collections:
- fortinet.fortios
connection: httpapi
vars:
vdom: "root"
ansible_httpapi_use_ssl: yes
ansible_httpapi_validate_certs: no
ansible_httpapi_port: 443
tasks:
- name: Configure IPv6 policies.
fortios_firewall_policy6:
vdom: "{{ vdom }}"
state: "present"
access_token: "<your_own_value>"
firewall_policy6:
action: "accept"
app_category:
-
id: "5"
app_group:
-
name: "default_name_7 (source application.group.name)"
application:
-
id: "9"
application_list: "<your_own_value> (source application.list.name)"
av_profile: "<your_own_value> (source antivirus.profile.name)"
comments: "<your_own_value>"
custom_log_fields:
-
field_id: "<your_own_value> (source log.custom-field.id)"
devices:
-
name: "default_name_16 (source user.device.alias user.device-group.name user.device-category.name)"
diffserv_forward: "enable"
diffserv_reverse: "enable"
diffservcode_forward: "<your_own_value>"
diffservcode_rev: "<your_own_value>"
dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
dscp_match: "enable"
dscp_negate: "enable"
dscp_value: "<your_own_value>"
dsri: "enable"
dstaddr:
-
name: "default_name_27 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name)"
dstaddr_negate: "enable"
dstintf:
-
name: "default_name_30 (source system.interface.name system.zone.name)"
firewall_session_dirty: "check-all"
fixedport: "enable"
global_label: "<your_own_value>"
groups:
-
name: "default_name_35 (source user.group.name)"
icap_profile: "<your_own_value> (source icap.profile.name)"
inbound: "enable"
ippool: "enable"
ips_sensor: "<your_own_value> (source ips.sensor.name)"
label: "<your_own_value>"
logtraffic: "all"
logtraffic_start: "enable"
name: "default_name_43"
nat: "enable"
natinbound: "enable"
natoutbound: "enable"
outbound: "enable"
per_ip_shaper: "<your_own_value> (source firewall.shaper.per-ip-shaper.name)"
policyid: "49"
poolname:
-
name: "default_name_51 (source firewall.ippool6.name)"
profile_group: "<your_own_value> (source firewall.profile-group.name)"
profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
profile_type: "single"
replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
rsso: "enable"
schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
send_deny_packet: "enable"
service:
-
name: "default_name_60 (source firewall.service.custom.name firewall.service.group.name)"
service_negate: "enable"
session_ttl: "62"
spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
srcaddr:
-
name: "default_name_65 (source firewall.address6.name firewall.addrgrp6.name)"
srcaddr_negate: "enable"
srcintf:
-
name: "default_name_68 (source system.zone.name system.interface.name)"
ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
ssl_mirror: "enable"
ssl_mirror_intf:
-
name: "default_name_72 (source system.zone.name system.interface.name)"
ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
status: "enable"
tcp_mss_receiver: "75"
tcp_mss_sender: "76"
tcp_session_without_syn: "all"
timeout_send_rst: "enable"
traffic_shaper: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
traffic_shaper_reverse: "<your_own_value> (source firewall.shaper.traffic-shaper.name)"
url_category:
-
id: "82"
users:
-
name: "default_name_84 (source user.local.name)"
utm_status: "enable"
uuid: "<your_own_value>"
vlan_cos_fwd: "87"
vlan_cos_rev: "88"
vlan_filter: "<your_own_value>"
voip_profile: "<your_own_value> (source voip.profile.name)"
vpntunnel: "<your_own_value> (source vpn.ipsec.phase1.name vpn.ipsec.manualkey.name)"
webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Authors¶
Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)