fortinet.fortios.fortios_firewall_proxy_policy – Configure proxy policies in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.9).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_firewall_proxy_policy.

New in version 2.8: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify firewall feature and proxy_policy category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter Choices/Defaults Comments
access_token
string
Token-based authentication. Generated from GUI of Fortigate.
firewall_proxy_policy
dictionary
Configure proxy policies.
action
string
    Choices:
  • accept
  • deny
  • redirect
Accept or deny traffic matching the policy parameters.
application_list
string
Name of an existing Application list. Source application.list.name.
av_profile
string
Name of an existing Antivirus profile. Source antivirus.profile.name.
comments
string
Optional comments.
disclaimer
string
    Choices:
  • disable
  • domain
  • policy
  • user
Web proxy disclaimer setting: by domain, policy, or user.
dlp_sensor
string
Name of an existing DLP sensor. Source dlp.sensor.name.
dstaddr
list / elements=string
Destination address objects.
name
string / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip.name firewall.vipgrp.name firewall.vip46.name firewall.vipgrp46.name system.external-resource.name.
dstaddr6
list / elements=string
IPv6 destination address objects.
name
string / required
Address name. Source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name firewall.vip64.name firewall.vipgrp64.name system.external-resource.name.
dstaddr_negate
string
    Choices:
  • enable
  • disable
When enabled, destination addresses match against any address EXCEPT the specified destination addresses.
dstintf
list / elements=string
Destination interface names.
name
string / required
Interface name. Source system.interface.name system.zone.name.
global_label
string
Global web-based manager visible label.
groups
list / elements=string
Names of group objects.
name
string / required
Group name. Source user.group.name.
http_tunnel_auth
string
    Choices:
  • enable
  • disable
Enable/disable HTTP tunnel authentication.
icap_profile
string
Name of an existing ICAP profile. Source icap.profile.name.
internet_service
string
    Choices:
  • enable
  • disable
Enable/disable use of Internet Services for this policy. If enabled, destination address and service are not used.
internet_service_custom
list / elements=string
Custom Internet Service name.
name
string / required
Custom name. Source firewall.internet-service-custom.name.
internet_service_id
list / elements=string
Internet Service ID.
id
integer / required
Internet Service ID. Source firewall.internet-service.id.
internet_service_negate
string
    Choices:
  • enable
  • disable
When enabled, Internet Services match against any internet service EXCEPT the selected Internet Service.
ips_sensor
string
Name of an existing IPS sensor. Source ips.sensor.name.
label
string
VDOM-specific GUI visible label.
logtraffic
string
    Choices:
  • all
  • utm
  • disable
Enable/disable logging traffic through the policy.
logtraffic_start
string
    Choices:
  • enable
  • disable
Enable/disable policy log traffic start.
policyid
integer / required
Policy ID.
poolname
list / elements=string
Name of IP pool object.
name
string / required
IP pool name. Source firewall.ippool.name.
profile_group
string
Name of profile group. Source firewall.profile-group.name.
profile_protocol_options
string
Name of an existing Protocol options profile. Source firewall.profile-protocol-options.name.
profile_type
string
    Choices:
  • single
  • group
Determine whether the firewall policy allows security profile groups or single profiles only.
proxy
string
    Choices:
  • explicit-web
  • transparent-web
  • ftp
  • ssh
  • ssh-tunnel
  • wanopt
Type of explicit proxy.
redirect_url
string
Redirect URL for further explicit web proxy processing.
replacemsg_override_group
string
Authentication replacement message override group. Source system.replacemsg-group.name.
scan_botnet_connections
string
    Choices:
  • disable
  • block
  • monitor
Enable/disable scanning of connections to Botnet servers.
schedule
string
Name of schedule object. Source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name.
service
list / elements=string
Name of service objects.
name
string / required
Service name. Source firewall.service.custom.name firewall.service.group.name.
service_negate
string
    Choices:
  • enable
  • disable
When enabled, services match against any service EXCEPT the specified destination services.
session_ttl
integer
TTL in seconds for sessions accepted by this policy (0 means use the system ).
spamfilter_profile
string
Name of an existing Spam filter profile. Source spamfilter.profile.name.
srcaddr
list / elements=string
Source address objects (must be set when using Web proxy).
name
string / required
Address name. Source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system .external-resource.name.
srcaddr6
list / elements=string
IPv6 source address objects.
name
string / required
Address name. Source firewall.address6.name firewall.addrgrp6.name system.external-resource.name.
srcaddr_negate
string
    Choices:
  • enable
  • disable
When enabled, source addresses match against any address EXCEPT the specified source addresses.
srcintf
list / elements=string
Source interface names.
name
string / required
Interface name. Source system.interface.name system.zone.name.
ssh_filter_profile
string
Name of an existing SSH filter profile. Source ssh-filter.profile.name.
ssl_ssh_profile
string
Name of an existing SSL SSH profile. Source firewall.ssl-ssh-profile.name.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.
status
string
    Choices:
  • enable
  • disable
Enable/disable the active status of the policy.
transparent
string
    Choices:
  • enable
  • disable
Enable to use the IP address of the client to connect to the server.
users
list / elements=string
Names of user objects.
name
string / required
Group name. Source user.local.name.
utm_status
string
    Choices:
  • enable
  • disable
Enable the use of UTM profiles/sensors/lists.
uuid
string
Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
waf_profile
string
Name of an existing Web application firewall profile. Source waf.profile.name.
webcache
string
    Choices:
  • enable
  • disable
Enable/disable web caching.
webcache_https
string
    Choices:
  • disable
  • enable
Enable/disable web caching for HTTPS (Requires deep-inspection enabled in ssl-ssh-profile).
webfilter_profile
string
Name of an existing Web filter profile. Source webfilter.profile.name.
webproxy_forward_server
string
Name of web proxy forward server. Source web-proxy.forward-server.name web-proxy.forward-server-group.name.
webproxy_profile
string
Name of web proxy profile. Source web-proxy.profile.name.
state
string
added in 2.9 of fortinet.fortios
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure proxy policies.
    fortios_firewall_proxy_policy:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      firewall_proxy_policy:
        action: "accept"
        application_list: "<your_own_value> (source application.list.name)"
        av_profile: "<your_own_value> (source antivirus.profile.name)"
        comments: "<your_own_value>"
        disclaimer: "disable"
        dlp_sensor: "<your_own_value> (source dlp.sensor.name)"
        dstaddr:
         -
            name: "default_name_10 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name firewall.vip
              .name firewall.vipgrp.name firewall.vip46.name firewall.vipgrp46.name system.external-resource.name)"
        dstaddr_negate: "enable"
        dstaddr6:
         -
            name: "default_name_13 (source firewall.address6.name firewall.addrgrp6.name firewall.vip6.name firewall.vipgrp6.name firewall.vip64.name firewall
              .vipgrp64.name system.external-resource.name)"
        dstintf:
         -
            name: "default_name_15 (source system.interface.name system.zone.name)"
        global_label: "<your_own_value>"
        groups:
         -
            name: "default_name_18 (source user.group.name)"
        http_tunnel_auth: "enable"
        icap_profile: "<your_own_value> (source icap.profile.name)"
        internet_service: "enable"
        internet_service_custom:
         -
            name: "default_name_23 (source firewall.internet-service-custom.name)"
        internet_service_id:
         -
            id:  "25 (source firewall.internet-service.id)"
        internet_service_negate: "enable"
        ips_sensor: "<your_own_value> (source ips.sensor.name)"
        label: "<your_own_value>"
        logtraffic: "all"
        logtraffic_start: "enable"
        policyid: "31"
        poolname:
         -
            name: "default_name_33 (source firewall.ippool.name)"
        profile_group: "<your_own_value> (source firewall.profile-group.name)"
        profile_protocol_options: "<your_own_value> (source firewall.profile-protocol-options.name)"
        profile_type: "single"
        proxy: "explicit-web"
        redirect_url: "<your_own_value>"
        replacemsg_override_group: "<your_own_value> (source system.replacemsg-group.name)"
        scan_botnet_connections: "disable"
        schedule: "<your_own_value> (source firewall.schedule.onetime.name firewall.schedule.recurring.name firewall.schedule.group.name)"
        service:
         -
            name: "default_name_43 (source firewall.service.custom.name firewall.service.group.name)"
        service_negate: "enable"
        session_ttl: "45"
        spamfilter_profile: "<your_own_value> (source spamfilter.profile.name)"
        srcaddr:
         -
            name: "default_name_48 (source firewall.address.name firewall.addrgrp.name firewall.proxy-address.name firewall.proxy-addrgrp.name system
              .external-resource.name)"
        srcaddr_negate: "enable"
        srcaddr6:
         -
            name: "default_name_51 (source firewall.address6.name firewall.addrgrp6.name system.external-resource.name)"
        srcintf:
         -
            name: "default_name_53 (source system.interface.name system.zone.name)"
        ssh_filter_profile: "<your_own_value> (source ssh-filter.profile.name)"
        ssl_ssh_profile: "<your_own_value> (source firewall.ssl-ssh-profile.name)"
        status: "enable"
        transparent: "enable"
        users:
         -
            name: "default_name_59 (source user.local.name)"
        utm_status: "enable"
        uuid: "<your_own_value>"
        waf_profile: "<your_own_value> (source waf.profile.name)"
        webcache: "enable"
        webcache_https: "disable"
        webfilter_profile: "<your_own_value> (source webfilter.profile.name)"
        webproxy_forward_server: "<your_own_value> (source web-proxy.forward-server.name web-proxy.forward-server-group.name)"
        webproxy_profile: "<your_own_value> (source web-proxy.profile.name)"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)