fortinet.fortios.fortios_router_ripng – Configure RIPng in Fortinet’s FortiOS and FortiGate.¶

Note

This plugin is part of the fortinet.fortios collection (version 1.1.9).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_ripng.

New in version 2.9: of fortinet.fortios

Synopsis
Requirements
Parameters
Notes
Examples
Return Values

Synopsis ¶

This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and ripng category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements ¶

The below requirements are needed on the host that executes this module.

ansible>=2.9.0

Parameters ¶

Parameter			Choices/Defaults	Comments
access_token string				Token-based authentication. Generated from GUI of Fortigate.
router_ripng dictionary				Configure RIPng.
	aggregate_address list / elements=string			Aggregate address.
		id integer / required		Aggregate address entry ID.
		prefix6 string		Aggregate address prefix.
	default_information_originate string		Choices: enable disable	Enable/disable generation of default route.
	default_metric integer			Default metric.
	distance list / elements=string			distance
		access_list6 string		Access list for route destination. Source router.access-list6.name.
		distance integer		Distance (1 - 255).
		id integer / required		Distance ID.
		prefix6 string		Distance prefix6.
	distribute_list list / elements=string			Distribute list.
		direction string	Choices: in out	Distribute list direction.
		id integer / required		Distribute list ID.
		interface string		Distribute list interface name. Source system.interface.name.
		listname string		Distribute access/prefix list name. Source router.access-list6.name router.prefix-list6.name.
		status string	Choices: enable disable	status
	garbage_timer integer			Garbage timer.
	interface list / elements=string			RIPng interface configuration.
		flags integer		Flags.
		name string / required		Interface name. Source system.interface.name.
		split_horizon string	Choices: poisoned regular	Enable/disable split horizon.
		split_horizon_status string	Choices: enable disable	Enable/disable split horizon.
	max_out_metric integer			Maximum metric allowed to output(0 means "not set").
	neighbor list / elements=string			neighbor
		id integer / required		Neighbor entry ID.
		interface string		Interface name. Source system.interface.name.
		ip6 string		IPv6 link-local address.
	network list / elements=string			Network.
		id integer / required		Network entry ID.
		prefix string		Network IPv6 link-local prefix.
	offset_list list / elements=string			Offset list.
		access_list6 string		IPv6 access list name. Source router.access-list6.name.
		direction string	Choices: in out	Offset list direction.
		id integer / required		Offset-list ID.
		interface string		Interface name. Source system.interface.name.
		offset integer		offset
		status string	Choices: enable disable	status
	passive_interface list / elements=string			Passive interface configuration.
		name string / required		Passive interface name. Source system.interface.name.
	redistribute list / elements=string			Redistribute configuration.
		metric integer		Redistribute metric setting.
		name string / required		Redistribute name.
		routemap string		Route map name. Source router.route-map.name.
		status string	Choices: enable disable	status
	timeout_timer integer			Timeout timer.
	update_timer integer			Update timer.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes ¶

Note

Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples ¶

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure RIPng.
    fortios_router_ripng:
      vdom:  "{{ vdom }}"
      router_ripng:
        aggregate_address:
         -
            id:  "4"
            prefix6: "<your_own_value>"
        default_information_originate: "enable"
        default_metric: "7"
        distance:
         -
            access_list6: "<your_own_value> (source router.access-list6.name)"
            distance: "10"
            id:  "11"
            prefix6: "<your_own_value>"
        distribute_list:
         -
            direction: "in"
            id:  "15"
            interface: "<your_own_value> (source system.interface.name)"
            listname: "<your_own_value> (source router.access-list6.name router.prefix-list6.name)"
            status: "enable"
        garbage_timer: "19"
        interface:
         -
            flags: "21"
            name: "default_name_22 (source system.interface.name)"
            split_horizon: "poisoned"
            split_horizon_status: "enable"
        max_out_metric: "25"
        neighbor:
         -
            id:  "27"
            interface: "<your_own_value> (source system.interface.name)"
            ip6: "<your_own_value>"
        network:
         -
            id:  "31"
            prefix: "<your_own_value>"
        offset_list:
         -
            access_list6: "<your_own_value> (source router.access-list6.name)"
            direction: "in"
            id:  "36"
            interface: "<your_own_value> (source system.interface.name)"
            offset: "38"
            status: "enable"
        passive_interface:
         -
            name: "default_name_41 (source system.interface.name)"
        redistribute:
         -
            metric: "43"
            name: "default_name_44"
            routemap: "<your_own_value> (source router.route-map.name)"
            status: "enable"
        timeout_timer: "47"
        update_timer: "48"

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors¶

Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)

fortinet.fortios.fortios_router_ripng – Configure RIPng in Fortinet’s FortiOS and FortiGate.¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶