fortinet.fortios.fortios_system_dhcp_server – Configure DHCP servers in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 1.1.9).

To install it use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_system_dhcp_server.

New in version 2.8: of fortinet.fortios

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify system_dhcp feature and server category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

• ansible>=2.9.0

Parameters

Parameter			Choices/Defaults	Comments
access_token string				Token-based authentication. Generated from GUI of Fortigate.
state string added in 2.9 of fortinet.fortios			Choices: present absent	Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
system_dhcp_server dictionary				Configure DHCP servers.
	auto_configuration string		Choices: disable enable	Enable/disable auto configuration.
	conflicted_ip_timeout integer			Time in seconds to wait after a conflicted IP address is removed from the DHCP range before it can be reused.
	ddns_auth string		Choices: disable tsig	DDNS authentication mode.
	ddns_key string			DDNS update key (base 64 encoding).
	ddns_keyname string			DDNS update key name.
	ddns_server_ip string			DDNS server IP.
	ddns_ttl integer			TTL.
	ddns_update string		Choices: disable enable	Enable/disable DDNS update for DHCP.
	ddns_update_override string		Choices: disable enable	Enable/disable DDNS update override for DHCP.
	ddns_zone string			Zone of your domain name (ex. DDNS.com).
	default_gateway string			Default gateway IP address assigned by the DHCP server.
	dns_server1 string			DNS server 1.
	dns_server2 string			DNS server 2.
	dns_server3 string			DNS server 3.
	dns_service string		Choices: local default specify	Options for assigning DNS servers to DHCP clients.
	domain string			Domain name suffix for the IP addresses that the DHCP server assigns to clients.
	exclude_range list / elements=string			Exclude one or more ranges of IP addresses from being assigned to clients.
		end_ip string		End of IP range.
		id integer / required		ID.
		start_ip string		Start of IP range.
	filename string			Name of the boot file on the TFTP server.
	forticlient_on_net_status string		Choices: disable enable	Enable/disable FortiClient-On-Net service for this DHCP server.
	id integer / required			ID.
	interface string			DHCP server can assign IP configurations to clients connected to this interface. Source system.interface.name.
	ip_mode string		Choices: range usrgrp	Method used to assign client IP.
	ip_range list / elements=string			DHCP IP range configuration.
		end_ip string		End of IP range.
		id integer / required		ID.
		start_ip string		Start of IP range.
	ipsec_lease_hold integer			DHCP over IPsec leases expire this many seconds after tunnel down (0 to disable forced-expiry).
	lease_time integer			Lease time in seconds, 0 means unlimited.
	mac_acl_default_action string		Choices: assign block	MAC access control default action (allow or block assigning IP settings).
	netmask string			Netmask assigned by the DHCP server.
	next_server string			IP address of a server (for example, a TFTP sever) that DHCP clients can download a boot file from.
	ntp_server1 string			NTP server 1.
	ntp_server2 string			NTP server 2.
	ntp_server3 string			NTP server 3.
	ntp_service string		Choices: local default specify	Options for assigning Network Time Protocol (NTP) servers to DHCP clients.
	options list / elements=string			DHCP options.
		code integer		DHCP option code.
		id integer / required		ID.
		ip string		DHCP option IPs.
		type string	Choices: hex string ip	DHCP option type.
		value string		DHCP option value.
	reserved_address list / elements=string			Options for the DHCP server to assign IP settings to specific MAC addresses.
		action string	Choices: assign block reserved	Options for the DHCP server to configure the client with the reserved MAC address.
		description string		Description.
		id integer / required		ID.
		ip string		IP address to be reserved for the MAC address.
		mac string		MAC address of the client that will get the reserved IP address.
	server_type string		Choices: regular ipsec	DHCP server can be a normal DHCP server or an IPsec DHCP server.
	state string		Choices: present absent	Deprecated Starting with Ansible 2.9 we recommend using the top-level 'state' parameter. Indicates whether to create or remove the object.
	status string		Choices: disable enable	Enable/disable this DHCP configuration.
	tftp_server list / elements=string			One or more hostnames or IP addresses of the TFTP servers in quotes separated by spaces.
		tftp_server string		TFTP server.
	timezone string		Choices: 1 2 3 4 5 81 6 7 08 09 10 11 12 13 74 14 77 15 16 17 18 19 20 75 87 21 22 23 24 80 79 25 26 27 28 78 29 30 31 32 33 34 35 36 37 38 83 84 40 85 41 42 43 39 44 46 47 51 48 45 49 50 52 53 54 55 56 57 58 59 60 62 63 61 64 65 66 67 68 69 70 71 72 0 82 73 86 76	Select the time zone to be assigned to DHCP clients.
	timezone_option string		Choices: disable default specify	Options for the DHCP server to set the client"s time zone.
	vci_match string		Choices: disable enable	Enable/disable vendor class identifier (VCI) matching. When enabled only DHCP requests with a matching VCI are served.
	vci_string list / elements=string			One or more VCI strings in quotes separated by spaces.
		vci_string string		VCI strings.
	wifi_ac1 string			WiFi Access Controller 1 IP address (DHCP option 138, RFC 5417).
	wifi_ac2 string			WiFi Access Controller 2 IP address (DHCP option 138, RFC 5417).
	wifi_ac3 string			WiFi Access Controller 3 IP address (DHCP option 138, RFC 5417).
	wins_server1 string			WINS server 1.
	wins_server2 string			WINS server 2.
vdom string			Default: "root"	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

• Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- hosts: fortigates
  collections:
    - fortinet.fortios
  connection: httpapi
  vars:
   vdom: "root"
   ansible_httpapi_use_ssl: yes
   ansible_httpapi_validate_certs: no
   ansible_httpapi_port: 443
  tasks:
  - name: Configure DHCP servers.
    fortios_system_dhcp_server:
      vdom:  "{{ vdom }}"
      state: "present"
      access_token: "<your_own_value>"
      system_dhcp_server:
        auto_configuration: "disable"
        conflicted_ip_timeout: "4"
        ddns_auth: "disable"
        ddns_key: "<your_own_value>"
        ddns_keyname: "<your_own_value>"
        ddns_server_ip: "<your_own_value>"
        ddns_ttl: "9"
        ddns_update: "disable"
        ddns_update_override: "disable"
        ddns_zone: "<your_own_value>"
        default_gateway: "<your_own_value>"
        dns_server1: "<your_own_value>"
        dns_server2: "<your_own_value>"
        dns_server3: "<your_own_value>"
        dns_service: "local"
        domain: "<your_own_value>"
        exclude_range:
         -
            end_ip: "<your_own_value>"
            id:  "21"
            start_ip: "<your_own_value>"
        filename: "<your_own_value>"
        forticlient_on_net_status: "disable"
        id:  "25"
        interface: "<your_own_value> (source system.interface.name)"
        ip_mode: "range"
        ip_range:
         -
            end_ip: "<your_own_value>"
            id:  "30"
            start_ip: "<your_own_value>"
        ipsec_lease_hold: "32"
        lease_time: "33"
        mac_acl_default_action: "assign"
        netmask: "<your_own_value>"
        next_server: "<your_own_value>"
        ntp_server1: "<your_own_value>"
        ntp_server2: "<your_own_value>"
        ntp_server3: "<your_own_value>"
        ntp_service: "local"
        options:
         -
            code: "42"
            id:  "43"
            ip: "<your_own_value>"
            type: "hex"
            value: "<your_own_value>"
        reserved_address:
         -
            action: "assign"
            description: "<your_own_value>"
            id:  "50"
            ip: "<your_own_value>"
            mac: "<your_own_value>"
        server_type: "regular"
        status: "disable"
        tftp_server:
         -
            tftp_server: "<your_own_value>"
        timezone: "01"
        timezone_option: "disable"
        vci_match: "disable"
        vci_string:
         -
            vci_string: "<your_own_value>"
        wifi_ac1: "<your_own_value>"
        wifi_ac2: "<your_own_value>"
        wifi_ac3: "<your_own_value>"
        wins_server1: "<your_own_value>"
        wins_server2: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
build string	always	Build number of the fortigate image Sample: 1547
http_method string	always	Last method used to provision the content into FortiGate Sample: PUT
http_status string	always	Last result given by FortiGate on last operation applied Sample: 200
mkey string	success	Master key (id) used in the last call to FortiGate Sample: id
name string	always	Name of the table used to fulfill the request Sample: urlfilter
path string	always	Path of the table used to fulfill the request Sample: webfilter
revision string	always	Internal revision number Sample: 17.0.2.10658
serial string	always	Serial number of the unit Sample: FGVMEVYYQT3AB5352
status string	always	Indication of the operation's result Sample: success
vdom string	always	Virtual domain used Sample: root
version string	always	Version of the FortiGate Sample: v5.6.3

Authors

• Link Zheng (@chillancezen)

• Jie Xue (@JieX19)

• Hongbin Lu (@fgtdev-hblu)

• Frank Shen (@frankshen01)

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)