inspur.sm.add_ldisk – Create logical disk.

Note

This plugin is part of the inspur.sm collection (version 1.1.2).

To install it use: ansible-galaxy collection install inspur.sm.

To use it in a playbook, specify: inspur.sm.add_ldisk.

New in version 0.1.0: of inspur.sm

Synopsis

  • Create logical disk on Inspur server.

Parameters

Parameter Choices/Defaults Comments
access
integer
    Choices:
  • 1
  • 2
  • 3
Access Policy, 1 - Read Write, 2 - Read Only, 3 - Blocked.
Required when Info=None.
cache
integer
    Choices:
  • 1
  • 2
  • 3
Drive Cache, 1 - Unchanged, 2 - Enabled,3 - Disabled.
Required when Info=None.
ctrl_id
integer
Raid controller ID.
Required when Info=None.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
info
string
    Choices:
  • show
Show controller and physical drive info.
init
integer
    Choices:
  • 1
  • 2
  • 3
Init State, 1 - No Init, 2 - Quick Init, 3 - Full Init.
Required when Info=None.
io
integer
    Choices:
  • 1
  • 2
IO Policy, 1 - Direct IO, 2 - Cached IO.
Required when Info=None.
level
integer
    Choices:
  • 0
  • 1
  • 5
  • 6
  • 10
RAID Level, 0 - RAID0, 1 - RAID1, 5 - RAID5, 6 - RAID6, 10 - RAID10.
Required when Info=None.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
provider
dictionary
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
r
integer
    Choices:
  • 1
  • 2
Read Policy, 1 - Read Ahead, 2 - No Read Ahead.
Required when Info=None.
select
integer
Select Size, from 1 to 100.
Required when Info=None.
size
integer
    Choices:
  • 1
  • 2
  • 3
  • 4
  • 5
Strip Size, 1 - 64k, 2 - 128k, 3 - 256k, 4 - 512k, 5 - 1024k.
Required when Info=None.
slot
list / elements=integer
Slot Num,input multiple slotNumber like 0,1,2....
Required when Info=None.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
w
integer
    Choices:
  • 1
  • 2
  • 3
Write Policy, 1 - Write Throgh, 2 - Write Back, 3 - Write caching ok if bad BBU.
Required when Info=None.

Examples

- name: Add ldisk test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Show pdisk information"
    inspur.sm.add_ldisk:
      info: "show"
      provider: "{{ ism }}"

  - name: "Add ldisk"
    inspur.sm.add_ldisk:
      ctrl_id: 0
      level: 1
      size: 1
      access: 1
      r: 1
      w: 1
      io: 1
      cache: 1
      init: 2
      select: 10
      slot: 0,1
      provider: "{{ ism }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Check to see if a change was made on the device.

message
string
always
Messages returned after module execution.

state
string
always
Status after module execution.



Authors

  • WangBaoshan (@ISIB-group)