junipernetworks.junos.junos_lacp_interfaces – LACP interfaces resource module

Note

This plugin is part of the junipernetworks.junos collection (version 1.3.0).

To install it use: ansible-galaxy collection install junipernetworks.junos.

To use it in a playbook, specify: junipernetworks.junos.junos_lacp_interfaces.

New in version 1.0.0: of junipernetworks.junos

Synopsis

  • This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Juniper JUNOS devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter Choices/Defaults Comments
config
list / elements=dictionary
The list of dictionaries of LACP interfaces options.
force_up
boolean
    Choices:
  • no
  • yes
This is a boolean argument to control if the port should be up in absence of received link Aggregation Control Protocol Data Unit (LACPDUS). This value is applicable for member interfaces only.
name
string
Name Identifier of the interface or link aggregation group.
period
string
    Choices:
  • fast
  • slow
Timer interval for periodic transmission of LACP packets. If the value is set to fast the packets are received every second and if the value is slow the packets are received every 30 seconds. This value is applicable for aggregate interface only.
port_priority
integer
Priority of the member port. This value is applicable for member interfaces only.
Refer to vendor documentation for valid values.
sync_reset
string
    Choices:
  • disable
  • enable
The argument notifies minimum-link failure out of sync to peer. If the value is disable it disables minimum-link failure handling at LACP level and if value is enable it enables minimum-link failure handling at LACP level. This value is applicable for aggregate interface only.
system
dictionary
This dict object contains configurable options related to LACP system parameters for the link aggregation group. This value is applicable for aggregate interface only.
mac
dictionary
Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address.
address
string
The system ID to use in LACP negotiations.
priority
integer
Specifies the system priority to use in LACP negotiations for the bundle.
Refer to vendor documentation for valid values.
running_config
string
This option is used only with state parsed.
The value of this option should be the output received from the Junos device by executing the command show interface.
The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module's argspec and the value is then returned in the parsed key within the result.
state
string
    Choices:
  • merged ←
  • replaced
  • overridden
  • deleted
  • gathered
  • parsed
  • rendered
The state of the configuration after module completion.

Examples

# Using merged
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#    ether-options {
#         802.3ad ae0;
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Merge provided configuration with device configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
    - name: ae0
      period: fast
      sync_reset: enable
      system:
        priority: 100
        mac:
          address: 00:00:00:00:00:02
    - name: ge-0/0/3
      port_priority: 100
      force_up: true
    state: merged

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using replaced
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Replace device LACP interfaces configuration with provided configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
    - name: ae0
      period: slow
    state: replaced

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic slow;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using overridden
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             periodic slow;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: Overrides all device LACP interfaces configuration with provided configuration
  junipernetworks.junos.junos_lacp_interfaces:
    config:
    - name: ae0
      system:
        priority: 300
        mac:
          address: 00:00:00:00:00:03
    - name: ge-0/0/2
      port_priority: 200
      force_up: false
    state: overridden

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 port-priority 200;
#             }
#             ae4;
#         }
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             system-priority 300;
#             system-id 00:00:00:00:00:03;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

# Using deleted
# Before state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 port-priority 200;
#             }
#             ae4;
#         }
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae0;
#         }
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             system-priority 300;
#             system-id 00:00:00:00:00:03;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }

- name: "Delete LACP interfaces attributes of given interfaces (Note: This won't delete the interface itself)"
  junipernetworks.junos.junos_lacp_interfaces:
    config:
    - name: ae0
    - name: ge-0/0/3
    - name: ge-0/0/2
    state: deleted

# After state:
# -------------
# user@junos01# show interfaces
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae4;
#     }
# }
# ge-0/0/3 {
#    ether-options {
#         802.3ad ae0;
#     }
# }
# ae0 {
#     description "lag interface merged";
#     aggregated-ether-options {
#         lacp {
#             passive;
#         }
#     }
# }
# ae4 {
#     description "test aggregate interface";
#     aggregated-ether-options {
#         lacp {
#             passive;
#             link-protection;
#         }
#     }
# }
# Using gathered
# Before state:
# ------------
#
# user@junos01# show interfaces
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae1;
#         }
#     }
# }
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae1;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-0/0/4 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-1/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.1/24;
#             address 10.200.16.20/24;
#         }
#         family inet6;
#     }
# }
# ge-2/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.2/24;
#             address 10.200.16.21/24;
#         }
#         family inet6;
#     }
# }
# ge-3/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.3/24;
#             address 10.200.16.22/24;
#         }
#         family inet6;
#     }
# }
# ae1 {
#     description "Configured by Ansible";
#     aggregated-ether-options {
#         lacp {
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae2 {
#     description "Configured by Ansible";
# }
# em1 {
#     description TEST;
# }
# fxp0 {
#     description ANSIBLE;
#     speed 1g;
#     link-mode automatic;
#     unit 0 {
#         family inet {
#             address 10.8.38.38/24;
#         }
#     }
# }
- name: Gather junos lacp interfaces as in given arguments
  junipernetworks.junos.junos_lacp_interfaces:
    state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": [
#         {
#             "force_up": true,
#             "name": "ge-0/0/1",
#             "port_priority": 100
#         },
#         {
#             "name": "ae1",
#             "period": "fast",
#             "sync_reset": "enable",
#             "system": {
#                 "mac": {
#                     "address": "00:00:00:00:00:02"
#                 },
#                 "priority": 100
#             }
#         }
#     ]
# After state:
# ------------
#
# ansible@cm123456tr21# show interfaces
# ge-0/0/1 {
#     ether-options {
#         802.3ad {
#             lacp {
#                 force-up;
#                 port-priority 100;
#             }
#             ae1;
#         }
#     }
# }
# ge-0/0/2 {
#     ether-options {
#         802.3ad ae1;
#     }
# }
# ge-0/0/3 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-0/0/4 {
#     ether-options {
#         802.3ad ae2;
#     }
# }
# ge-1/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.1/24;
#             address 10.200.16.20/24;
#         }
#         family inet6;
#     }
# }
# ge-2/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.2/24;
#             address 10.200.16.21/24;
#         }
#         family inet6;
#     }
# }
# ge-3/0/0 {
#     unit 0 {
#         family inet {
#             address 192.168.100.3/24;
#             address 10.200.16.22/24;
#         }
#         family inet6;
#     }
# }
# ae1 {
#     description "Configured by Ansible";
#     aggregated-ether-options {
#         lacp {
#             periodic fast;
#             sync-reset enable;
#             system-priority 100;
#             system-id 00:00:00:00:00:02;
#         }
#     }
# }
# ae2 {
#     description "Configured by Ansible";
# }
# em1 {
#     description TEST;
# }
# fxp0 {
#     description ANSIBLE;
#     speed 1g;
#     link-mode automatic;
#     unit 0 {
#         family inet {
#             address 10.8.38.38/24;
#         }
#     }
# }
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
#     <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <interfaces>
#         <interface>
#             <name>ge-0/0/1</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <lacp>
#                         <force-up/>
#                         <port-priority>100</port-priority>
#                     </lacp>
#                     <bundle>ae1</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/2</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae1</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/3</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae2</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-0/0/4</name>
#             <ether-options>
#                 <ieee-802.3ad>
#                     <bundle>ae2</bundle>
#                 </ieee-802.3ad>
#             </ether-options>
#         </interface>
#         <interface>
#             <name>ge-1/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.1/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.20/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ge-2/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.2/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.21/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ge-3/0/0</name>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>192.168.100.3/24</name>
#                         </address>
#                         <address>
#                             <name>10.200.16.22/24</name>
#                         </address>
#                     </inet>
#                     <inet6>
#                     </inet6>
#                 </family>
#             </unit>
#         </interface>
#         <interface>
#             <name>ae1</name>
#             <description>Configured by Ansible</description>
#             <aggregated-ether-options>
#                 <lacp>
#                     <periodic>fast</periodic>
#                     <sync-reset>enable</sync-reset>
#                     <system-priority>100</system-priority>
#                     <system-id>00:00:00:00:00:02</system-id>
#                 </lacp>
#             </aggregated-ether-options>
#         </interface>
#         <interface>
#             <name>ae2</name>
#             <description>Configured by Ansible</description>
#         </interface>
#         <interface>
#             <name>em1</name>
#             <description>TEST</description>
#         </interface>
#         <interface>
#             <name>fxp0</name>
#             <description>ANSIBLE</description>
#             <speed>1g</speed>
#             <link-mode>automatic</link-mode>
#             <unit>
#                 <name>0</name>
#                 <family>
#                     <inet>
#                         <address>
#                             <name>10.8.38.38/24</name>
#                         </address>
#                     </inet>
#                 </family>
#             </unit>
#         </interface>
#     </interfaces>
#     </configuration>
# </rpc-reply>
# - name: Convert interfaces config to argspec without connecting to the appliance
#   junipernetworks.junos.junos_lacp_interfaces:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": [
#         {
#             "force_up": true,
#             "name": "ge-0/0/1",
#             "port_priority": 100
#         },
#         {
#             "name": "ae1",
#             "period": "fast",
#             "sync_reset": "enable",
#             "system": {
#                 "mac": {
#                     "address": "00:00:00:00:00:02"
#                 },
#                 "priority": 100
#             }
#         }
#     ]
# Using rendered
- name: Render platform specific xml from task input using rendered state
  junipernetworks.junos.junos_lacp_interfaces:
    config:
     - name: ae1
       period: fast
       sync_reset: enable
       system:
         priority: 100
         mac:
           address: 00:00:00:00:00:02

     - name: ge-0/0/1
       port_priority: 100
       force_up: true
    state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:interfaces
#     xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
#     <nc:interface>
#         <nc:name>ae1</nc:name>
#         <nc:aggregated-ether-options>
#             <nc:lacp>
#                 <nc:periodic>fast</nc:periodic>
#                 <nc:sync-reset>enable</nc:sync-reset>
#                 <nc:system-id>00:00:00:00:00:02</nc:system-id>
#                 <nc:system-priority>100</nc:system-priority>
#             </nc:lacp>
#         </nc:aggregated-ether-options>
#     </nc:interface>
#     <nc:interface>
#         <nc:name>ge-0/0/1</nc:name>
#         <nc:ether-options>
#             <nc:ieee-802.3ad>
#                 <nc:lacp>
#                     <nc:port-priority>100</nc:port-priority>
#                     <nc:force-up/>
#                 </nc:lacp>
#             </nc:ieee-802.3ad>
#         </nc:ether-options>
#     </nc:interface>
# </nc:interfaces>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
after
list / elements=string
when changed
The configuration as structured data after module completion.

Sample:
The configuration returned will always be in the same format of the parameters above.
before
list / elements=string
always
The configuration as structured data prior to module invocation.

Sample:
The configuration returned will always be in the same format of the parameters above.
commands
list / elements=string
always
The set of commands pushed to the remote device.

Sample:
['<nc:interfaces xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"> <nc:interface> <nc:name>ae1</nc:name> <nc:aggregated-ether-options> <nc:lacp> <nc:periodic>fast</nc:periodic> <nc:sync-reset>enable</nc:sync-reset> <nc:system-id>00:00:00:00:00:02</nc:system-id> <nc:system-priority>100</nc:system-priority> </nc:lacp> </nc:aggregated-ether-options> </nc:interface> <nc:interface> <nc:name>ge-0/0/1</nc:name> <nc:ether-options> <nc:ieee-802.3ad> <nc:lacp> <nc:port-priority>100</nc:port-priority> <nc:force-up/> </nc:lacp> </nc:ieee-802.3ad> </nc:ether-options> </nc:interface> </nc:interfaces>', 'xml 2', 'xml 3']


Authors

  • Ganesh Nalawade (@ganeshrn)