junipernetworks.junos.junos_lacp – Global Link Aggregation Control Protocol (LACP) Junos resource module¶
Note
This plugin is part of the junipernetworks.junos collection (version 1.3.0).
To install it use: ansible-galaxy collection install junipernetworks.junos
.
To use it in a playbook, specify: junipernetworks.junos.junos_lacp
.
New in version 1.0.0: of junipernetworks.junos
Synopsis¶
This module provides declarative management of global LACP on Juniper Junos network devices.
Note
This module has a corresponding action plugin.
Requirements¶
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
Parameters¶
Notes¶
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 18.1R1.
This module works with connection
netconf
. See the Junos OS Platform Options.
Examples¶
# Using deleted
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
- name: Delete global LACP attributes
junipernetworks.junos.junos_lacp:
state: deleted
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#
# Using merged
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
#
- name: Merge global LACP attributes
junipernetworks.junos.junos_lacp:
config:
system_priority: 63
link_protection: revertive
state: merged
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
# Using replaced
# Before state:
# -------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection {
# non-revertive;
# }
- name: Replace global LACP attributes
junipernetworks.junos.junos_lacp:
config:
system_priority: 30
link_protection: non-revertive
state: replaced
# After state:
# ------------
# user@junos01# show chassis aggregated-devices ethernet lacp
# system-priority 30;
# link-protection;
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;
- name: Gather junos lacp as in given arguments
junipernetworks.junos.junos_lacp:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
# "link_protection": "revertive",
# "system_priority": 63
# }
# After state:
# ------------
#
# ansible@cm123456tr21# show chassis aggregated-devices ethernet lacp
# system-priority 63;
# link-protection;
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lacp:
config:
system_priority: 63
link_protection: revertive
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:chassis
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:aggregated-devices>
# <nc:ethernet>
# <nc:lacp>
# <nc:system-priority>63</nc:system-priority>
# <nc:link-protection>
# <nc:non-revertive delete="delete"/>
# </nc:link-protection>
# </nc:lacp>
# </nc:ethernet>
# </nc:aggregated-devices>
# </nc:chassis>
#
# Using parsed
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <chassis>
# <aggregated-devices>
# <ethernet>
# <lacp>
# <system-priority>63</system-priority>
# <link-protection>
# </link-protection>
# </lacp>
# </ethernet>
# </aggregated-devices>
# </chassis>
# </configuration>
# </rpc-reply>
# - name: Convert lacp config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lacp:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
# "link_protection": "revertive",
# "system_priority": 63
# }
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Authors¶
Ganesh Nalawade (@ganeshrn)