junipernetworks.junos.junos_lldp_global – LLDP resource module¶
Note
This plugin is part of the junipernetworks.junos collection (version 1.3.0).
To install it use: ansible-galaxy collection install junipernetworks.junos.
To use it in a playbook, specify: junipernetworks.junos.junos_lldp_global.
New in version 1.0.0: of junipernetworks.junos
Synopsis¶
This module manages link layer discovery protocol (LLDP) attributes on Juniper JUNOS devices.
Note
This module has a corresponding action plugin.
Requirements¶
The below requirements are needed on the host that executes this module.
ncclient (>=v0.6.4)
Parameters¶
Notes¶
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 18.4R1.
This module works with connection
netconf. See the Junos OS Platform Options.
Examples¶
# Using merged
# Before state:
# -------------
# user@junos01# # show protocols lldp
#
- name: Merge provided configuration with device configuration
junipernetworks.junos.junos_lldp_global:
config:
interval: 10000
address: 10.1.1.1
transmit_delay: 400
hold_multiplier: 10
state: merged
# After state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# Using replaced
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
- name: Replace provided configuration with device configuration
junipernetworks.junos.junos_lldp_global:
config:
address: 20.2.2.2
hold_multiplier: 30
enabled: false
state: replaced
# After state:
# -------------
# user@junos01# show protocols lldp
# disable;
# management-address 20.2.2.2;
# hold-multiplier 30;
# Using deleted
# Before state:
# -------------
# user@junos01# show protocols lldp
# management-address 20.2.2.2;
# hold-multiplier 30;
- name: Delete lldp configuration (this will by default remove all lldp configuration)
junipernetworks.junos.junos_lldp_global:
state: deleted
# After state:
# -------------
# user@junos01# # show protocols lldp
#
#
# Using gathered
# Before state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
# disable;
# }
- name: Gather junos lldp_global as in given arguments
junipernetworks.junos.junos_lldp_global:
state: gathered
# Task Output (redacted)
# -----------------------
#
# "gathered": {
# "address": "10.1.1.1",
# "hold_multiplier": 10,
# "interval": 10000,
# "transmit_delay": 400
# }
# After state:
# ------------
#
# ansible@cm123456tr21# show protocols lldp
# management-address 10.1.1.1;
# advertisement-interval 10000;
# transmit-delay 400;
# hold-multiplier 10;
# interface ge-0/0/1;
# interface ge-0/0/2 {
# disable;
# }
# Using rendered
- name: Render platform specific xml from task input using rendered state
junipernetworks.junos.junos_lldp_global:
config:
interval: 10000
address: 10.1.1.1
transmit_delay: 400
hold_multiplier: 10
state: rendered
# Task Output (redacted)
# -----------------------
# "rendered": "<nc:protocols
# xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0">
# <nc:lldp>
# <nc:management-address>10.1.1.1</nc:management-address>
# <nc:advertisement-interval>10000</nc:advertisement-interval>
# <nc:transmit-delay>400</nc:transmit-delay>
# <nc:hold-multiplier>10</nc:hold-multiplier>
# <nc:disable delete="delete"/>
# </nc:lldp>
# </nc:protocols>"
#
# parsed.cfg
# ------------
#
# <?xml version="1.0" encoding="UTF-8"?>
# <rpc-reply message-id="urn:uuid:0cadb4e8-5bba-47f4-986e-72906227007f">
# <configuration changed-seconds="1590139550" changed-localtime="2020-05-22 09:25:50 UTC">
# <protocols>
# <ospf>
# <area>
# <name>0.0.0.0</name>
# <interface>
# <name>ge-0/0/0.0</name>
# </interface>
# </area>
# </ospf>
# <lldp>
# <management-address>10.1.1.1</management-address>
# <advertisement-interval>10000</advertisement-interval>
# <transmit-delay>400</transmit-delay>
# <hold-multiplier>10</hold-multiplier>
# <interface>
# <name>ge-0/0/1</name>
# </interface>
# <interface>
# <name>ge-0/0/2</name>
# <disable/>
# </interface>
# </lldp>
# </protocols>
# </configuration>
# </rpc-reply>
# - name: Convert lldp global config to argspec without connecting to the appliance
# junipernetworks.junos.junos_lldp_global:
# running_config: "{{ lookup('file', './parsed.cfg') }}"
# state: parsed
# Task Output (redacted)
# -----------------------
# "parsed": {
# "address": "10.1.1.1",
# "hold_multiplier": 10,
# "interval": 10000,
# "transmit_delay": 400
# }
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Authors¶
Ganesh Nalawade (@ganeshrn)