netapp.ontap.na_ontap_vscan_on_access_policy – NetApp ONTAP Vscan on access policy configuration.

Note

This plugin is part of the netapp.ontap collection (version 21.4.0).

To install it use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_vscan_on_access_policy.

New in version 2.8.0: of netapp.ontap

Synopsis

  • Configure on access policy for Vscan (virus scan)

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
cert_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client cert file (.pem).
not supported with python 2.6.
feature_flags
dictionary
added in 20.5.0 of netapp.ontap
Enable or disable a new feature.
This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.
Supported keys and values are subject to change without notice. Unknown keys are ignored.
file_ext_to_exclude
list / elements=string
File extensions for which On-Access scanning must not be performed.
file_ext_to_include
list / elements=string
File extensions for which On-Access scanning is considered. The default value is '*', which means that all files are considered for scanning except
those which are excluded from scanning.
filters
list / elements=string
A list of filters which can be used to define the scope of the On-Access policy more precisely. The filters can be added in any order. Possible values
scan_ro_volume Enable scans for read-only volume,
scan_execute_access Scan only files opened with execute-access (CIFS only)
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https.
Ignored when using REST as only https is supported.
Ignored when using SSL certificate authentication as it requires SSL.
is_scan_mandatory
boolean
    Choices:
  • no ←
  • yes
Specifies whether access to a file is allowed if there are no external virus-scanning servers available for virus scanning. It is true if not provided at the time of creating a policy.
key_filepath
string
added in 20.6.0 of netapp.ontap
path to SSL client key file.
max_file_size
integer
Max file-size (in bytes) allowed for scanning. The default value of 2147483648 (2GB) is taken if not provided at the time of creating a policy.
ontapi
integer
The ontap api version to use
password
string
Password for the specified user.

aliases: pass
paths_to_exclude
list / elements=string
File paths for which On-Access scanning must not be performed.
policy_name
string / required
The name of the policy
policy_status
boolean
added in 20.8.0 of netapp.ontap
    Choices:
  • no
  • yes
Status for the created policy
scan_files_with_no_ext
boolean
    Choices:
  • no
  • yes ←
Specifies whether files without any extension are considered for scanning or not.
state
string
    Choices:
  • present ←
  • absent
Whether a Vscan on Access policy is present or not
use_rest
string
Default:
"auto"
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
always -- will always use the REST API
never -- will always use the ZAPI
auto -- will try to use the REST Api
username
string
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.
For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
Two authentication methods are supported
1. basic authentication, using username and password,
2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.
To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
vserver
string / required
the name of the data vserver to use.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Create Vscan On Access Policy
  na_ontap_vscan_on_access_policy:
    state: present
    username: '{{ netapp_username }}'
    password: '{{ netapp_password }}'
    hostname: '{{ netapp_hostname }}'
    vserver: carchi-vsim2
    policy_name: carchi_policy
    file_ext_to_exclude: ['exe', 'yml']
- name: Create Vscan On Access Policy with Policy Status enabled
  na_ontap_vscan_on_access_policy:
    state: present
    username: '{{ netapp_username }}'
    password: '{{ netapp_password }}'
    hostname: '{{ netapp_hostname }}'
    vserver: carchi-vsim2
    policy_name: carchi_policy
    file_ext_to_exclude: ['exe', 'yml']
    policy_status: True
- name: modify Vscan on Access Policy
  na_ontap_vscan_on_access_policy:
    state: present
    username: '{{ netapp_username }}'
    password: '{{ netapp_password }}'
    hostname: '{{ netapp_hostname }}'
    vserver: carchi-vsim2
    policy_name: carchi_policy
    file_ext_to_exclude: ['exe', 'yml', 'py']
- name: Delete On Access Policy
  na_ontap_vscan_on_access_policy:
    state: absent
    username: '{{ netapp_username }}'
    password: '{{ netapp_password }}'
    hostname: '{{ netapp_hostname }}'
    vserver: carchi-vsim2
    policy_name: carchi_policy

Authors