You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

arista.eos.eos_bgp_address_family – Manages BGP address family resource module

Note

This plugin is part of the arista.eos collection (version 2.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_bgp_address_family.

New in version 1.4.0: of arista.eos

Synopsis

• This module configures and manages the attributes of BGP AF on Arista EOS platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter	Comments
config dictionary	Configurations for BGP address family.
address_family list / elements=dictionary	Enable address family and enter its config mode
afi string	address family. Choices: ipv4 ipv6 evpn
bgp_params dictionary	BGP parameters.
additional_paths string	BGP additional-paths commands Choices: install send receive
next_hop_address_family string	Next-hop address-family configuration Choices: ipv6
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: no yes
redistribute_internal boolean	Redistribute internal BGP routes. Choices: no yes
route string	Configure route-map for route installation.
graceful_restart boolean	Enable graceful restart mode. Choices: no yes
neighbor list / elements=dictionary	Configure routing for a network.
activate boolean	Activate neighbor in the address family. Choices: no yes
additional_paths string	BGP additional-paths commands. Choices: send receive
default_originate dictionary	Originate default route to this neighbor.
always boolean	Always originate default route to this neighbor. Choices: no yes
route_map string	Route map reference.
encapsulation dictionary	Default transport encapsulation for neighbor. Applicable for evpn address-family.
source_interface string	Source interface to update BGP next hop address. Applicable for mpls transport.
transport string	MPLS/VXLAN transport. Choices: mpls vxlan
graceful_restart boolean	Enable graceful restart mode. Choices: no yes
next_hop_address_family string	Next-hop address-family configuration Choices: ipv6
next_hop_unchanged boolean	Preserve original nexthop while advertising routes to eBGP peers. Choices: no yes
peer string	Neighbor address/ peer-group name.
prefix_list dictionary	Prefix list reference.
direction string	Configure an inbound/outbound prefix-list. Choices: in out
name string	prefix list name.
route_map dictionary	Route map reference.
direction string	Configure an inbound/outbound route-map. Choices: in out
name string	Route map name.
weight integer	Weight to assign.
network list / elements=dictionary	configure routing for network.
address string	network address.
route_map string	Route map reference.
redistribute list / elements=dictionary	Redistribute routes in to BGP.
isis_level string	Applicable for isis routes. Specify isis route level. Choices: level-1 level-2 level-1-2
ospf_route string	ospf route options. Choices: internal external nssa_external_1 nssa_external_2
protocol string	Routes to be redistributed. Choices: isis ospf3 dhcp
route_map string	Route map reference.
route_target dictionary	Route target
mode string	route import or route export. Choices: both import export
target string	route target
safi string	Address family type for ipv4. Choices: labeled-unicast multicast
vrf string	name of the VRF in which BGP will be configured.
as_number string	Autonomous system number.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the EOS device by executing the command show running-config | section bgp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: deleted merged ← (default) overridden replaced gathered rendered parsed

Notes

Note

• Tested against Arista EOS 4.23.0F

• This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged

# Before state

# veos(config)#show running-config | section bgp
# veos(config)#

  - name: Merge provided configuration with device configuration
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"
      state: merged

# After state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#

# Module Execution:

# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {},
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ],

# Using replaced:

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 activate
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
# veos(config-router-bgp)#
#

  - name: Replace
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
      state: replaced

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
#
# # Module Execution:
#
#     "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute ospf3 match external",
#         "no redistribute isis level-2",
#         "no route-target export 33:11",
#         "exit",
#         "exit",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "no neighbor peer2 activate",
#         "no bgp additional-paths receive",
#         "exit"
#     ],

# Using overridden (overriding af at global context):
# Before state:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       neighbor peer2 default-originate always
#       redistribute isis level-2
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#

  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
      state: overridden

# After State:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          redistribute ospf3 match external
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "neighbor": [
#                     {
#                         "activate": true,
#                         "peer": "1.1.1.1"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "address-family ipv4",
#         "no redistribute ospf3 match external",
#         "no network 1.1.1.0/24",
#         "no network 1.5.1.0/24 route-map MAP01",
#         "neighbor peer2 default-originate always",
#         "no neighbor 1.1.1.1 activate",
#         "bgp additional-paths receive",
#         "exit",
#         "no address-family ipv6"
#     ],

# using Overridden (overridding af in vrf context):

# Before State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv6
#          route-target export 33:11
#          redistribute isis level-2
#          redistribute ospf3 match external
# veos(config-router-bgp)#


  - name: Overridden
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
            vrf: vrft
      state: overridden

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     },
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "route_target": {
#                     "mode": "export",
#                     "target": "33:11"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "changed": true,
#     "commands": [
#         "router bgp 10",
#         "vrf vrft",
#         "address-family ipv4",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "exit",
#         " vrf vrft",
#         "no address-family ipv6"
#     ],

# Using Deleted:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: Delete
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv6"
            vrf: "vrft"
          - afi: "ipv6"
      state: deleted

# After State:

# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#
#
# Module Execution:
#
# "after": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },
#     "before": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# Using parsed:

# parsed_bgp_address_family.cfg :

# router bgp 10
#    neighbor n2 peer-group
#    neighbor n2 next-hop-unchanged
#    neighbor n2 maximum-routes 12000
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    network 1.1.1.0/24
#    network 1.5.1.0/24 route-map MAP01
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       redistribute ospf3 match external
#    !
#    address-family ipv6
#       no bgp additional-paths receive
#       neighbor n2 next-hop-unchanged
#       redistribute isis level-2
#    !
#    vrf bgp_10
#       ip access-group acl01
#       ucmp fec threshold trigger 33 clear 22 warning-only
#       !
#       address-family ipv4
#          route-target import 20:11
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
#       !
#       address-family ipv6
#          redistribute ospf3 match external

  - name: parse configs
    arista.eos.eos_bgp_address_family:
      running_config: "{{ lookup('file', './parsed_bgp_address_family.cfg') }}"
      state: parsed

# Module Execution:
# "parsed": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv6",
#                 "neighbor": [
#                     {
#                         "next_hop_unchanged": true,
#                         "peer": "n2"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "isis_level": "level-2",
#                         "protocol": "isis"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "route_target": {
#                     "mode": "import",
#                     "target": "20:11"
#                 },
#                 "vrf": "bgp_10"
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             },
#             {
#                 "afi": "ipv6",
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ],
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     }
# }

# Using gathered:

# Device config:
# veos(config-router-bgp)#show running-config | section bgp
# router bgp 10
#    neighbor peer2 peer-group
#    neighbor peer2 maximum-routes 12000
#    neighbor 1.1.1.1 maximum-routes 12000
#    !
#    address-family ipv4
#       bgp additional-paths receive
#       neighbor peer2 default-originate always
#       no neighbor 1.1.1.1 activate
#       network 1.1.1.0/24
#       network 1.5.1.0/24 route-map MAP01
#       redistribute ospf3 match external
#    !
#    vrf vrft
#       address-family ipv4
#          bgp additional-paths receive
# veos(config-router-bgp)#

  - name: gather configs
    arista.eos.eos_bgp_address_family:
      state: gathered

# Module Execution:
# "gathered": {
#         "address_family": [
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "neighbor": [
#                     {
#                         "default_originate": {
#                             "always": true
#                         },
#                         "peer": "peer2"
#                     }
#                 ],
#                 "network": [
#                     {
#                         "address": "1.1.1.0/24"
#                     },
#                     {
#                         "address": "1.5.1.0/24",
#                         "route_map": "MAP01"
#                     }
#                 ],
#                 "redistribute": [
#                     {
#                         "ospf_route": "external",
#                         "protocol": "ospf3"
#                     }
#                 ]
#             },
#             {
#                 "afi": "ipv4",
#                 "bgp_params": {
#                     "additional_paths": "receive"
#                 },
#                 "vrf": "vrft"
#             }
#         ],
#         "as_number": "10"
#     },

# using rendered:

  - name:  Render
    arista.eos.eos_bgp_address_family:
      config:
        as_number: "10"
        address_family:
          - afi: "ipv4"
            redistribute:
              - protocol: "ospf3"
                ospf_route: "external"
            network:
              - address: "1.1.1.0/24"
              - address: "1.5.1.0/24"
                route_map: "MAP01"
          - afi: "ipv6"
            bgp_params:
              additional_paths: "receive"
            neighbor:
              - peer: "peer2"
                default_originate:
                  always: True
          - afi: "ipv6"
            redistribute:
              - protocol: "isis"
                isis_level: "level-2"
            route_target:
              mode: "export"
              target: "33:11"
            vrf: "vrft"

      state: rendered

# Module Execution:

# "rendered": [
#         "router bgp 10",
#         "address-family ipv4",
#         "redistribute ospf3 match external",
#         "network 1.1.1.0/24",
#         "network 1.5.1.0/24 route-map MAP01",
#         "exit",
#         "address-family ipv6",
#         "neighbor peer2 default-originate always",
#         "bgp additional-paths receive",
#         "exit",
#         "vrf vrft",
#         "address-family ipv6",
#         "redistribute isis level-2",
#         "route-target export 33:11",
#         "exit",
#         "exit"
#     ]
#

Authors

• Gomathi Selvi Srinivasan (@GomathiselviS)