You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.ios.ios_interface – (deprecated, removed after 2022-06-01) Manage Interface on Cisco IOS network devices

Note

This plugin is part of the cisco.ios collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_interface.

New in version 1.0.0: of cisco.ios

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED 

Removed in: major release after 2022-06-01
Why: Newer and updated modules released with more functionality in Ansible 2.9
Alternative: ios_interfaces

Synopsis 

This module provides declarative management of Interfaces on Cisco IOS network devices.

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
aggregate list / elements=dictionary	List of Interfaces definitions.
delay integer	Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are state with values `up`/`down`, tx_rate and rx_rate.
description string	Description of Interface.
duplex string	Interface link status Choices: full half auto
enabled boolean	Interface link status. Choices: no yes
mtu string	Maximum size of transmit packet.
name string / required	Name of the Interface.
neighbors list / elements=dictionary	Check the operational state of given interface `name` for CDP/LLDP neighbor. The following suboptions are available.
host string	CDP/LLDP neighbor host for given interface `name`.
port string	CDP/LLDP neighbor port to which given interface `name` is connected.
rx_rate string	Receiver rate in bits per second (bps). This is state check parameter only. Supports conditionals, see https://docs.ansible.com/ansible/latest/network/user_guide/network_working_with_command_output.html#conditionals-in-networking-modules
speed string	Interface link speed.
state string	State of the Interface configuration, `up` means present and operationally up and `down` means present and operationally `down` Choices: present absent up down
tx_rate string	Transmit rate in bits per second (bps). This is state check parameter only. Supports conditionals, see https://docs.ansible.com/ansible/latest/network/user_guide/network_working_with_command_output.html#conditionals-in-networking-modules
delay integer	Time in seconds to wait before checking for the operational state on remote device. This wait is applicable for operational state argument which are state with values `up`/`down`, tx_rate and rx_rate. Default: 10
description string	Description of Interface.
duplex string	Interface link status Choices: full half auto
enabled boolean	Interface link status. Choices: no yes ← (default)
mtu string	Maximum size of transmit packet.
name string	Name of the Interface.
neighbors list / elements=dictionary	Check the operational state of given interface `name` for CDP/LLDP neighbor. The following suboptions are available.
host string	CDP/LLDP neighbor host for given interface `name`.
port string	CDP/LLDP neighbor port to which given interface `name` is connected.
provider dictionary	Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. For more information please see the https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html. A dict object containing connection details.
auth_pass string	Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
authorize boolean	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead. Choices: no ← (default) yes
host string	Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password string	Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
port integer	Specifies the port to use when building the connection to the remote device.
ssh_keyfile path	Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
username string	Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
rx_rate string	Receiver rate in bits per second (bps). This is state check parameter only. Supports conditionals, see https://docs.ansible.com/ansible/latest/network/user_guide/network_working_with_command_output.html#conditionals-in-networking-modules
speed string	Interface link speed.
state string	State of the Interface configuration, `up` means present and operationally up and `down` means present and operationally `down` Choices: present ← (default) absent up down
tx_rate string	Transmit rate in bits per second (bps). This is state check parameter only. Supports conditionals, see https://docs.ansible.com/ansible/latest/network/user_guide/network_working_with_command_output.html#conditionals-in-networking-modules

Notes 

Note

Tested against IOS 15.6
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples 

- name: configure interface
  cisco.ios.ios_interface:
    name: GigabitEthernet0/2
    description: test-interface
    speed: 100
    duplex: half
    mtu: 512

- name: remove interface
  cisco.ios.ios_interface:
    name: Loopback9
    state: absent

- name: make interface up
  cisco.ios.ios_interface:
    name: GigabitEthernet0/2
    enabled: true

- name: make interface down
  cisco.ios.ios_interface:
    name: GigabitEthernet0/2
    enabled: false

- name: Check intent arguments
  cisco.ios.ios_interface:
    name: GigabitEthernet0/2
    state: up
    tx_rate: ge(0)
    rx_rate: le(0)

- name: Check neighbors intent arguments
  cisco.ios.ios_interface:
    name: Gi0/0
    neighbors:
    - port: eth0
      host: netdev

- name: Config + intent
  cisco.ios.ios_interface:
    name: GigabitEthernet0/2
    enabled: false
    state: down

- name: Add interface using aggregate
  cisco.ios.ios_interface:
    aggregate:
    - {name: GigabitEthernet0/1, mtu: 256, description: test-interface-1}
    - {name: GigabitEthernet0/2, mtu: 516, description: test-interface-2}
    duplex: full
    speed: 100
    state: present

- name: Delete interface using aggregate
  cisco.ios.ios_interface:
    aggregate:
    - name: Loopback9
    - name: Loopback10
    state: absent

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
commands list / elements=string	The list of configuration mode commands to send to the device. Returned: always, except for the platforms that use Netconf transport to manage the device. Sample: [“interface GigabitEthernet0/2”, “description test-interface”, “duplex half”, “mtu 512”]

Status 

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors

Ganesh Nalawade (@ganeshrn)

cisco.ios.ios_interface – (deprecated, removed after 2022-06-01) Manage Interface on Cisco IOS network devices

DEPRECATED

Synopsis

Parameters

Notes

Examples

Return Values

Status

Authors

DEPRECATED 

Synopsis 

Parameters 

Notes 

Examples 

Return Values 

Status 