cisco.iosxr.iosxr_lacp_interfaces – LACP interfaces resource module
Note
This plugin is part of the cisco.iosxr collection (version 2.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.iosxr
.
To use it in a playbook, specify: cisco.iosxr.iosxr_lacp_interfaces
.
New in version 1.0.0: of cisco.iosxr
Synopsis
This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on IOS-XR devices.
Note
This module has a corresponding action plugin.
Parameters
Parameter |
Comments |
---|---|
A dictionary of LACP interfaces options. |
|
Specifies the parameter for logging of LACP churn events. Valid only for ether-bundles. Mode ‘actor’ logs actor churn events only. Mode ‘partner’ logs partner churn events only. Mode ‘both’ logs actor and partner churn events only. Choices:
|
|
Specifies the collector max delay to be signaled to the LACP partner. Valid only for ether-bundles. Refer to vendor documentation for valid values. |
|
Name/Identifier of the interface or Ether-Bundle. |
|
Specifies the rate at which packets are sent or received. For ether-bundles, this specifies the period to be used by its member links. Refer to vendor documentation for valid values. |
|
Specifies the time for which to suppress flaps during a LACP switchover. Valid only for ether-bundles. Refer to vendor documentation for valid values. |
|
This dict object contains configurable options related to LACP system parameters for ether-bundles. |
|
Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address. |
|
Specifies the system priority to use in LACP negotiations for the bundle. Refer to vendor documentation for valid values. |
|
This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config int. The state parsed reads the configuration from |
|
The state of the configuration after module completion. Choices:
|
Notes
Note
This module works with connection
network_cli
. See the IOS-XR Platform Options.
Examples
# Using merged
#
#
# ------------
# Before state
# ------------
#
#
#
# RP/0/0/CPU0:an-iosxr#sh running-config interface
# Sun Jul 21 18:01:35.079 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1'
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
#
- name: Merge provided configuration with device configuration
cisco.iosxr.iosxr_lacp_interfaces:
config:
- name: Bundle-Ether10
churn_logging: actor
collector_max_delay: 100
switchover_suppress_flaps: 500
- name: Bundle-Ether11
system:
mac: 00c2.4c00.bd15
- name: GigabitEthernet0/0/0/1
period: 200
state: merged
#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
- name: Replace LACP configuration of listed interfaces with provided configuration
cisco.iosxr.iosxr_lacp_interfaces:
config:
- name: Bundle-Ether10
churn_logging: partner
- name: GigabitEthernet0/0/0/2
period: 300
state: replaced
#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:50:21.929 UTC
# interface Bundle-Ether10
# lacp churn logging partner
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# lacp period 300
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
#
# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
#
- name: Override all interface LACP configuration with provided configuration
cisco.iosxr.iosxr_lacp_interfaces:
config:
- name: Bundle-Ether12
churn_logging: both
collector_max_delay: 100
switchover_suppress_flaps: 500
- name: GigabitEthernet0/0/0/1
period: 300
state: overridden
#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr(config-if)#do sh run int
# Sun Jul 21 19:32:36.115 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# lacp churn logging both
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 300
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp non-revertive
# !
# interface Bundle-Ether12
# !
# interface Loopback888
# description test for ansible
# shutdown
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# description 'GigabitEthernet - 1"
# lacp period 200
# !
# interface GigabitEthernet0/0/0/2
# description "GigabitEthernet - 2"
# lacp period 300
# !
# interface GigabitEthernet0/0/0/3
# description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
# description "GigabitEthernet - 4"
# !
#
- name: Deleted LACP configurations of provided interfaces (Note - This won't delete
the interface itself)
cisco.iosxr.iosxr_lacp_interfaces:
config:
- name: Bundle-Ether10
- name: Bundle-Ether11
- name: GigabitEthernet0/0/0/1
- name: GigabitEthernet0/0/0/2
state: deleted
#
#
# -----------
# After state
# -----------
#
#
# Using parsed:
# parsed.cfg
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# lacp period 200
# !
#
- name: Convert lacp interfaces config to argspec without connecting to the appliance
cisco.iosxr.iosxr_lacp_interfaces:
running_config: "{{ lookup('file', './parsed.cfg') }}"
state: parsed
# --------------
# Output:
# --------------
# parsed:
# - name: Bundle-Ether10
# churn_logging: actor
# collector_max_delay: 100
# switchover_suppress_flaps: 500
#
# - name: Bundle-Ether11
# system:
# mac: 00c2.4c00.bd15
#
# - name: GigabitEthernet0/0/0/1
# period: 200
#
#
# Using gathered:
# Native config:
# interface Bundle-Ether10
# lacp churn logging actor
# lacp switchover suppress-flaps 500
# lacp collector-max-delay 100
# !
# interface Bundle-Ether11
# lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
# ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
# lacp period 200
# !
#
- name: Gather IOSXR lacp interfaces configuration
cisco.iosxr.iosxr_lacp_interfaces:
config:
state: gathered
# ----------
# Output
# ---------
# gathered:
# - name: Bundle-Ether10
# churn_logging: actor
# collector_max_delay: 100
# switchover_suppress_flaps: 500
#
# - name: Bundle-Ether11
# system:
# mac: 00c2.4c00.bd15
#
# - name: GigabitEthernet0/0/0/1
# period: 200
# Using rendered:
- name: Render platform specific commands from task input using rendered state
cisco.iosxr.iosxr_lacp_interfaces:
config:
- name: Bundle-Ether10
churn_logging: actor
collector_max_delay: 100
switchover_suppress_flaps: 500
- name: Bundle-Ether11
system:
mac: 00c2.4c00.bd15
- name: GigabitEthernet0/0/0/1
period: 200
state: rendered
# -------------
# Output
# -------------
# rendered: [
# - "interface Bundle-Ether10"
# - " lacp churn logging actor"
# - " lacp switchover suppress-flaps 500"
# - " lacp collector-max-delay 100"
# - "interface Bundle-Ether11"
# - " lacp system mac 00c2.4c00.bd15"
# - "interface MgmtEth0/0/CPU0/0"
# - " ipv4 address 192.0.2.11 255.255.255.0"
# - "interface GigabitEthernet0/0/0/1"
# - " lacp period 200"
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The configuration as structured data after module completion. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The configuration as structured data prior to module invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The set of commands pushed to the remote device. Returned: always Sample: [“interface Bundle-Ether10”, “lacp churn logging partner”, “lacp period 150”] |
Authors
Nilashish Chakraborty (@nilashishc)