You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_ntp_global – Manages ntp resource module

Note

This plugin is part of the cisco.iosxr collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ntp_global.

New in version 2.5.0: of cisco.iosxr

Synopsis

• This module configures and manages the attributes of ntp on Cisco IOSXR platforms.

Note

This module has a corresponding action plugin.

Parameters

Parameter	Comments
config dictionary	A dictionary of ntp options
access_group dictionary	Control NTP access
ipv4 dictionary	Configure IPv4 access
peer string	Provide full access
query_only string	Allow only control queries.
serve string	Provide server and query access.
serve_only string	Provide only server access.
ipv6 dictionary	Configure IPv6 access
peer string	Provide full access
query_only string	Allow only control queries.
serve string	Provide server and query access.
serve_only string	Provide only server access.
vrfs list / elements=dictionary	Specify non-default VRF.
ipv4 dictionary	Configure IPv4 access
peer string	Provide full access
query_only string	Allow only control queries.
serve string	Provide server and query access.
serve_only string	Provide only server access.
ipv6 dictionary	Configure IPv6 access
peer string	Provide full access
query_only string	Allow only control queries.
serve string	Provide server and query access.
serve_only string	Provide only server access.
name string	Specify non-default VRF.
authenticate boolean	Authenticate time sources Choices: no yes
authentication_keys list / elements=dictionary	Authentication key for trusted time sources
encryption boolean	Type of key encrypted or clear-text. Choices: no yes
id integer	<1-65535> Key number
key string	Authentication key.
broadcastdelay integer	Estimated round-trip delay in microseconds.
drift dictionary	Drift(cisco-support)
aging_time integer	Aging time in hours.
file string	File for drift values.
interfaces list / elements=dictionary	Configure NTP on an interface.
broadcast_client boolean	Listen to NTP broadcasts Choices: no yes
broadcast_destination string	Configure broadcast destination address.
broadcast_key integer	Broadcast key number.
broadcast_version integer	<2-4> NTP version number.
multicast_client string	Configure multicast client
multicast_destination string	Configure multicast destination
multicast_key integer	Configure multicast authentication key.
multicast_ttl integer	Configure TTL to use.
multicast_version integer	<2-4> NTP version number.
name string	Name of the interface.
vrf string	Name of the vrf.
ipv4 dictionary	Mark the dscp/precedence bit for ipv4 packets.
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence string	Set precedence Please refer vendor document for valid entries. Choices: critical flash flash-override immediate internet network priority routine
ipv6 dictionary	Mark the dscp/precedence bit for ipv4 packets.
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
precedence string	Set precedence Please refer vendor document for valid entries. Choices: critical flash flash-override immediate internet network priority routine
log_internal_sync boolean	Logs internal synchronization changes. Choices: no yes
master dictionary	Act as NTP master clock
stratum integer	Use NTP as clock source with stratum number <1-15>
max_associations integer	<0-4294967295> Number of associations.
passive boolean	Enable the passive associations. Choices: no yes
peers list / elements=dictionary	Configure NTP peer.
burst boolean	Use burst mode. Choices: no yes
iburst boolean	Use initial burst mode. Choices: no yes
key_id integer	SConfigure peer authentication key
maxpoll integer	configure Maximum poll interval.
minpoll integer	configure Minimum poll interval.
peer string / required	Hostname or A.B.C.D or A:B:C:D:E:F:G:H.
prefer boolean	Prefer this peer when possible Choices: no yes
source string	Interface for source address.
version integer	NTP version.
vrf string	vrf name.
servers list / elements=dictionary	Configure NTP server.
burst boolean	Use burst mode. Choices: no yes
iburst boolean	Use initial burst mode. Choices: no yes
key_id integer	SConfigure peer authentication key
maxpoll integer	configure Maximum poll interval.
minpoll integer	configure Minimum poll interval.
prefer boolean	Prefer this peer when possible Choices: no yes
server string / required	Hostname or A.B.C.D or A:B:C:D:E:F:G:H.
source string	Interface for source address.
version integer	NTP version.
vrf string	vrf name.
source_interface string	Configure default interface.
source_vrfs list / elements=dictionary	Configure default interface.
name string	Name of source interface.
vrf string	vrf name.
trusted_keys list / elements=dictionary	list of Key numbers for trusted time sources.
key_id integer	Key numbers for trusted time sources.
update_calendar boolean	Periodically update calendar with NTP time. Choices: no yes
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOSXR device by executing the command show running-config ntp. The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: deleted merged ← (default) overridden replaced gathered rendered parsed

Notes

Note

• Tested against IOSXR 7.0.2.

• This module works with connection network_cli.

Examples

# Using state: merged
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Merged play:
# ------------
- name: Merge the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
      config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl1
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/0
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af11
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.1
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/0
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ------------
# "commands": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: deleted
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Deleted play:
# -------------
- name: Remove all existing configuration
  cisco.iosxr.iosxr_ntp_global:
    state: deleted
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp server vrf siteD 192.0.2.2 burst ",
#         "no ntp trusted-key 1",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "no ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "no ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "no ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "no ntp access-group ipv4 peer PeerAcl1",
#         "no ntp access-group ipv4 serve ServeAcl1",
#         "no ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "no ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "no ntp authenticate",
#         "no ntp log-internal-sync",
#         "no ntp broadcastdelay 1",
#         "no ntp drift aging time 0",
#         "no ntp drift file apphost",
#         "no ntp ipv4 dscp af11",
#         "no ntp ipv6 precedence routine",
#         "no ntp max-associations 10",
#         "no ntp master 1",
#         "no ntp passive",
#         "no ntp update-calendar",
#         "no ntp source GigabitEthernet0/0/0/0"
#     ],
# After state:
# ------------
# RP/0/0/CPU0:10#show running-config ntp
# --------------------- EMPTY -----------------
# Using state: overridden
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Overridden play:
# ----------------
- name: Override BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: overridden
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
#
# Using state: replaced
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Replaced play:
# ----------------
- name: Replaced BGP configuration with provided configuration
  cisco.iosxr.iosxr_ntp_global:
        state: replaced
        config:
          access_group:
            ipv4:
              peer: PeerAcl1
              query_only: QueryOnlyAcl1
              serve: ServeAcl4
              serve_only: ServeOnlyAcl1
            vrfs:
              - ipv4:
                  peer: PeerAcl3
                  serve: ServeAcl2
                name: siteA
          authenticate: true
          broadcastdelay: 1
          drift:
            aging_time: 0
            file: apphost
          interfaces:
            - name: GigabitEthernet0/0/0/1
              multicast_client: 224.0.0.8
              multicast_destination: 224.0.0.8
              broadcast_client: true
          ipv4:
            dscp: af12
          ipv6:
            precedence: routine
          log_internal_sync: true
          master: 1
          max_associations: 10
          passive: true
          peers:
            - iburst: true
              peer: 192.0.2.3
              vrf: siteC
          servers:
            - burst: true
              server: 192.0.2.2
              vrf: siteD
          source: GigabitEthernet0/0/0/1
          source_vrfs:
            - name: GigabitEthernet0/0/0/0
              vrf: siteE
          trusted_keys:
            - key_id: 1
          update_calendar: true
# Commands Fired:
# ---------------
# "commands": [
#         "no ntp peer vrf siteC 192.0.2.1 iburst ",
#         "no ntp interface GigabitEthernet0/0/0/0",
#         "ntp peer vrf siteC 192.0.2.3 iburst ",
#         "ntp interface GigabitEthernet0/0/0/1 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/1 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/1 multicast client 224.0.0.8",
#         "ntp access-group ipv4 serve ServeAcl4",
#         "ntp ipv4 dscp af12",
#         "ntp source GigabitEthernet0/0/0/1"
#     ],
# After state:
# ------------
# RP/0/RP0/CPU0:ios#show running-config ntp
# Mon Sep 13 10:38:22.690 UTC
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/1
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authentication-key 1 md5 encrypted testkey
#  authenticate
#  trusted-key 1
#  ipv4 dscp af12
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.3 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl4
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/1
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Using state: gathered
# Before state:
# -------------
# RP/0/0/CPU0:10#show running-config ntp
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Gathered play:
# --------------
- name: Gather listed ntp config
  cisco.iosxr.iosxr_ntp_global:
    state: gathered
# Module Execution Result:
# ------------------------
# "gathered":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }
# Using state: rendered
# Rendered play:
# --------------
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.iosxr.iosxr_ntp_global:
    state: rendered
    config:
      access_group:
        ipv4:
          peer: PeerAcl1
          query_only: QueryOnlyAcl1
          serve: ServeAcl1
          serve_only: ServeOnlyAcl1
        vrfs:
          - ipv4:
              peer: PeerAcl3
              serve: ServeAcl2
            name: siteA
      authenticate: true
      broadcastdelay: 1
      drift:
        aging_time: 0
        file: apphost
      interfaces:
        - name: GigabitEthernet0/0/0/0
          multicast_client: 224.0.0.8
          multicast_destination: 224.0.0.8
          broadcast_client: true
      ipv4:
        dscp: af11
      ipv6:
        precedence: routine
      log_internal_sync: true
      master: 1
      max_associations: 10
      passive: true
      peers:
        - iburst: true
          peer: 192.0.2.1
          vrf: siteC
      servers:
        - burst: true
          server: 192.0.2.2
          vrf: siteD
      source: GigabitEthernet0/0/0/0
      source_vrfs:
        - name: GigabitEthernet0/0/0/0
          vrf: siteE
      trusted_keys:
        - key_id: 1
      update_calendar: true
  register: result
# Module Execution Result:
# ------------------------
# "rendered": [
#         "ntp peer vrf siteC 192.0.2.1 iburst ",
#         "ntp server vrf siteD 192.0.2.2 burst ",
#         "ntp trusted-key 1",
#         "ntp interface GigabitEthernet0/0/0/0 broadcast client",
#         "ntp interface GigabitEthernet0/0/0/0 multicast destination 224.0.0.8",
#         "ntp interface GigabitEthernet0/0/0/0 multicast client 224.0.0.8",
#         "ntp vrf siteE source GigabitEthernet0/0/0/0",
#         "ntp access-group vrf siteA ipv4 serve ServeAcl2",
#         "ntp access-group vrf siteA ipv4 peer PeerAcl3",
#         "ntp access-group ipv4 peer PeerAcl1",
#         "ntp access-group ipv4 serve ServeAcl1",
#         "ntp access-group ipv4 serve-only ServeOnlyAcl1",
#         "ntp access-group ipv4 query-only QueryOnlyAcl1",
#         "ntp authenticate",
#         "ntp log-internal-sync",
#         "ntp broadcastdelay 1",
#         "ntp drift aging time 0",
#         "ntp drift file apphost",
#         "ntp ipv4 dscp af11",
#         "ntp ipv6 precedence routine",
#         "ntp max-associations 10",
#         "ntp master 1",
#         "ntp passive",
#         "ntp update-calendar",
#         "ntp source GigabitEthernet0/0/0/0"
#     ],
# Using state: parsed
# File: parsed.cfg
# ----------------
# ntp
#  max-associations 10
#  interface GigabitEthernet0/0/0/0
#   broadcast client
#   multicast client 224.0.0.8
#   multicast destination 224.0.0.8
#  !
#  authenticate
#  trusted-key 1
#  ipv4 dscp af11
#  ipv6 precedence routine
#  peer vrf siteC 192.0.2.1 iburst
#  server vrf siteD 192.0.2.2 burst
#  drift file apphost
#  drift aging time 0
#  master 1
#  access-group vrf siteA ipv4 peer PeerAcl3
#  access-group vrf siteA ipv4 serve ServeAcl2
#  access-group ipv4 peer PeerAcl1
#  access-group ipv4 serve ServeAcl1
#  access-group ipv4 serve-only ServeOnlyAcl1
#  access-group ipv4 query-only QueryOnlyAcl1
#  source vrf siteE GigabitEthernet0/0/0/0
#  source GigabitEthernet0/0/0/0
#  passive
#  broadcastdelay 1
#  update-calendar
#  log-internal-sync
# !
# Parsed play:
# ------------
- name: Parse the provided configuration with the existing running configuration
  cisco.iosxr.iosxr_ntp_global:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed
# Module Execution Result:
# ------------------------
# "parsed":{
#         "access_group": {
#             "ipv4": {
#                 "peer": "PeerAcl1",
#                 "query_only": "QueryOnlyAcl1",
#                 "serve": "ServeAcl1",
#                 "serve_only": "ServeOnlyAcl1"
#             },
#             "vrfs": [
#                 {
#                     "ipv4": {
#                         "peer": "PeerAcl3",
#                         "serve": "ServeAcl2"
#                     },
#                     "name": "siteA"
#                 }
#             ]
#         },
#         "authenticate": true,
#         "broadcastdelay": 1,
#         "drift": {
#             "aging_time": 0,
#             "file": "apphost"
#         },
#         "interfaces": [
#             {
#                 "broadcast_client": true,
#                 "multicast_client": "224.0.0.8",
#                 "multicast_destination": "224.0.0.8",
#                 "name": "GigabitEthernet0/0/0/0"
#             }
#         ],
#         "ipv4": {
#             "dscp": "af11"
#         },
#         "ipv6": {
#             "precedence": "routine"
#         },
#         "log_internal_sync": true,
#         "master": 1,
#         "max_associations": 10,
#         "passive": true,
#         "peers": [
#             {
#                 "iburst": true,
#                 "peer": "192.0.2.1",
#                 "vrf": "siteC"
#             }
#         ],
#         "servers": [
#             {
#                 "burst": true,
#                 "server": "192.0.2.2",
#                 "vrf": "siteD"
#             }
#         ],
#         "source": "GigabitEthernet0/0/0/0",
#         "source_vrfs": [
#             {
#                 "name": "GigabitEthernet0/0/0/0",
#                 "vrf": "siteE"
#             }
#         ],
#         "trusted_keys": [
#             {
#                 "key_id": 1
#             }
#         ],
#         "update_calendar": true
#     }

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration after module execution. Returned: when changed Sample: “This output will always be in the same format as the module argspec.\n”
before dictionary	The configuration prior to the module execution. Returned: when state is merged, replaced, overridden, deleted or purged Sample: “This output will always be in the same format as the module argspec.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: when state is merged, replaced, overridden, deleted or purged Sample: [“sample command 1”, “sample command 2”, “sample command 3”]
gathered list / elements=string	Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: “This output will always be in the same format as the module argspec.\n”
parsed list / elements=string	The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: “This output will always be in the same format as the module argspec.\n”
rendered list / elements=string	The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: [“sample command 1”, “sample command 2”, “sample command 3”]

Authors

• Ashwini Mhatre (@amhatre)