You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.mso.mso_schema_template_bd – Manage Bridge Domains (BDs) in schema templates

Note

This plugin is part of the cisco.mso collection (version 1.2.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.mso.

To use it in a playbook, specify: cisco.mso.mso_schema_template_bd.

Synopsis
Requirements
Parameters
Notes
Examples

Synopsis 

Manage BDs in schema templates on Cisco ACI Multi-Site.

Requirements 

The below requirements are needed on the host that executes this module.

Multi Site Orchestrator v2.1 or newer

Parameters 

Parameter	Comments
arp_flooding boolean	ARP Flooding Choices: no yes
bd aliases: name string	The name of the BD to manage.
dhcp_policies list / elements=dictionary	A list DHCP Policies to be assciated with the BD This option can only be used on versions of MSO that are 3.1.1h or greater.
dhcp_option_policy dictionary	The DHCP Option Policy
name string	The name of the DHCP Option Policy
version integer	The version of the DHCP Option Policy
name string / required	The name of the DHCP Relay Policy
version integer / required	The version of DHCP Relay Policy
dhcp_policy dictionary	The DHCP Policy
dhcp_option_policy dictionary	The DHCP Option Policy
name string	The name of the DHCP Option Policy
version integer	The version of the DHCP Option Policy
name string / required	The name of the DHCP Relay Policy
version integer / required	The version of DHCP Relay Policy
display_name string	The name as displayed on the MSO web interface.
host aliases: hostname string	IP Address or hostname of the ACI Multi Site Orchestrator host. If the value is not specified in the task, the value of environment variable `MSO_HOST` will be used instead.
intersite_bum_traffic boolean	Whether to allow intersite BUM traffic. Choices: no yes
ipv6_unknown_multicast_flooding string	IPv6 Unknown Multicast Flooding can either be Flood or Optimized Flooding Choices: flood optimized_flooding
layer2_stretch boolean	Whether to enable L2 stretch. Choices: no yes ← (default)
layer2_unknown_unicast string	Layer2 unknown unicast. Choices: flood proxy
layer3_multicast boolean	Whether to enable L3 multicast. Choices: no yes
login_domain string	The login domain name to use for authentication. The default value is Local. If the value is not specified in the task, the value of environment variable `MSO_LOGIN_DOMAIN` will be used instead.
multi_destination_flooding string	Multi-Destination Flooding can either be Flood in BD or just Drop Choices: flood_in_bd drop
optimize_wan_bandwidth boolean	Whether to optimize WAN bandwidth. Choices: no yes
output_level string	Influence the output of this MSO module. `normal` means the standard output, incl. `current` dict `info` adds informational output, incl. `previous`, `proposed` and `sent` dicts `debug` adds debugging output, incl. `filter_string`, `method`, `response`, `status` and `url` information If the value is not specified in the task, the value of environment variable `MSO_OUTPUT_LEVEL` will be used instead. Choices: debug info normal ← (default)
password string	The password to use for authentication. If the value is not specified in the task, the value of environment variables `MSO_PASSWORD` or `ANSIBLE_NET_PASSWORD` will be used instead.
port integer	Port number to be used for the REST connection. The default value depends on parameter use_ssl. If the value is not specified in the task, the value of environment variable `MSO_PORT` will be used instead.
schema string / required	The name of the schema.
state string	Use `present` or `absent` for adding or removing. Use `query` for listing an object or multiple objects. Choices: absent present ← (default) query
subnets list / elements=dictionary	The subnets associated to this BD.
description string	The description of this subnet.
no_default_gateway boolean	Whether this subnet has a default gateway. Choices: no ← (default) yes
primary boolean	Treat as Primary Subnet. There can be only one primary subnet per address family under a BD. This option can only be used on versions of MSO that are 3.1.1h or greater. Choices: no ← (default) yes
querier boolean	Whether this subnet is an IGMP querier. Choices: no ← (default) yes
scope string	The scope of the subnet. Choices: private ← (default) public
shared boolean	Whether this subnet is shared between VRFs. Choices: no ← (default) yes
subnet aliases: ip string / required	The IP range in CIDR notation.
virtual boolean	Treat as Virtual IP Address. Choices: no ← (default) yes
template string / required	The name of the template. Display Name of template for operations can only be used in some versions of mso. Use the name of template instead of Display Name to avoid discrepency.
timeout integer	The socket level timeout in seconds. If the value is not specified in the task, the value of environment variable `MSO_TIMEOUT` will be used instead. Default: 30
unicast_routing boolean	Unicast Routing This option can only be used on versions of MSO that are 3.1.1h or greater. Choices: no ← (default) yes
unknown_multicast_flooding string	Unknown Multicast Flooding can either be Flood or Optimized Flooding Choices: flood optimized_flooding
use_proxy boolean	If `no`, it will not use a proxy, even if one is defined in an environment variable on the target hosts. If the value is not specified in the task, the value of environment variable `MSO_USE_PROXY` will be used instead. Choices: no yes ← (default)
use_ssl boolean	If `no`, an HTTP connection will be used instead of the default HTTPS connection. If the value is not specified in the task, the value of environment variable `MSO_USE_SSL` will be used instead. Choices: no yes ← (default)
username string	The username to use for authentication. If the value is not specified in the task, the value of environment variables `MSO_USERNAME` or `ANSIBLE_NET_USERNAME` will be used instead. Default: “admin”
validate_certs boolean	If `no`, SSL certificates will not be validated. This should only set to `no` when used on personally controlled sites using self-signed certificates. If the value is not specified in the task, the value of environment variable `MSO_VALIDATE_CERTS` will be used instead. Choices: no yes ← (default)
virtual_mac_address string	Virtual MAC Address
vrf dictionary	The VRF associated to this BD. This is required only when creating a new BD.
name string / required	The name of the VRF to associate with.
schema string	The schema that defines the referenced VRF. If this parameter is unspecified, it defaults to the current schema.
template string	The template that defines the referenced VRF. If this parameter is unspecified, it defaults to the current template.

Notes 

Note

Please read the mso_guide for more detailed information on how to manage your MSO infrastructure using Ansible.
This module was written to support Multi Site Orchestrator v2.1 or newer. Some or all functionality may not work on earlier versions.

Examples 

- name: Add a new BD
  cisco.mso.mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD 1
    vrf:
      name: VRF1
    state: present
  delegate_to: localhost

- name: Add a new BD from another Schema
  mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD 1
    vrf:
      name: VRF1
      schema: Schema Origin
      template: Template Origin
    state: present
  delegate_to: localhost

- name: Add bd with options available on version 3.1
  mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD 1
    intersite_bum_traffic: true
    optimize_wan_bandwidth: false
    layer2_stretch: true
    layer2_unknown_unicast: flood
    layer3_multicast: false
    unknown_multicast_flooding: flood
    multi_destination_flooding: drop
    ipv6_unknown_multicast_flooding: flood
    arp_flooding: false
    virtual_mac_address: 00:00:5E:00:01:3C
    subnets:
    - subnet: 10.0.0.128/24
    - subnet: 10.0.1.254/24
      description: 1234567890
    - ip: 192.168.0.254/24
      description: "My description for a subnet"
      scope: private
      shared: false
      no_default_gateway: true
    vrf:
      name: vrf1
      schema: Test
      template: Template1
    dhcp_policy:
      name: ansible_test
      version: 1
      dhcp_option_policy:
        name: ansible_test_option
        version: 1
    state: present

- name: Add bd with options available on version 3.1.1h or greater
  mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD 1
    intersite_bum_traffic: true
    optimize_wan_bandwidth: false
    layer2_stretch: true
    layer2_unknown_unicast: flood
    layer3_multicast: false
    unknown_multicast_flooding: flood
    multi_destination_flooding: drop
    ipv6_unknown_multicast_flooding: flood
    arp_flooding: false
    virtual_mac_address: 00:00:5E:00:01:3C
    unicast_routing: true
    subnets:
    - subnet: 10.0.0.128/24
      primary: true
    - subnet: 10.0.1.254/24
      description: 1234567890
      virtual: true
    - ip: 192.168.0.254/24
      description: "My description for a subnet"
      scope: private
      shared: false
      no_default_gateway: true
    vrf:
      name: vrf1
      schema: Schema1
      template: Template1
    dhcp_policies:
      - name: ansible_test
        version: 1
        dhcp_option_policy:
          name: ansible_test_option
          version: 1
      - name: ansible_test2
        version: 1
        dhcp_option_policy:
          name: ansible_test_option2
          version: 1
      - name: ansible_test3
        version: 1
        dhcp_option_policy:
          name: ansible_test_option
          version: 1
    state: present
  delegate_to: localhost

- name: Remove a BD
  cisco.mso.mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD1
    state: absent
  delegate_to: localhost

- name: Query a specific BD
  cisco.mso.mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    bd: BD1
    state: query
  delegate_to: localhost
  register: query_result

- name: Query all BDs
  cisco.mso.mso_schema_template_bd:
    host: mso_host
    username: admin
    password: SomeSecretPassword
    schema: Schema 1
    template: Template 1
    state: query
  delegate_to: localhost
  register: query_result

Authors

Dag Wieers (@dagwieers)
Shreyas Srish (@shrsr)

cisco.mso.mso_schema_template_bd – Manage Bridge Domains (BDs) in schema templates

Synopsis

Requirements

Parameters

Notes

Examples