cisco.nxos.nxos_prefix_lists – Prefix-Lists resource module.

Note

This plugin is part of the cisco.nxos collection (version 2.8.2).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_prefix_lists.

New in version 2.4.0: of cisco.nxos

Synopsis

  • This module manages prefix-lists configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of prefix-list configuration.

afi

string

The Address Family Identifier (AFI) for the prefix-lists.

Choices:

  • ipv4

  • ipv6

prefix_lists

list / elements=dictionary

List of prefix-list configurations.

description

string

Description of the prefix list

entries

list / elements=dictionary

List of configurations for the specified prefix-list

action

string

Prefix-List permit or deny.

Choices:

  • permit

  • deny

eq

integer

Exact prefix length to be matched.

ge

integer

Minimum prefix length to be matched.

le

integer

Maximum prefix length to be matched.

mask

string

Explicit match mask.

prefix

string

IP or IPv6 prefix in A.B.C.D/LEN or A:B::C:D/LEN format.

sequence

integer

Sequence Number.

name

string

Name of the prefix-list.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^ip(.* prefix-list’).

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Refer to examples for more details.

With state replaced, for the listed prefix-lists, sequences that are in running-config but not in the task are negated.

With state overridden, all prefix-lists that are in running-config but not in the task are negated.

Please refer to examples for more details.

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • parsed

  • gathered

  • rendered

Notes

Note

  • Tested against NX-OS 9.3.6.

  • Unsupported for Cisco MDS

  • This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# nxos-9k-rdo#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: AllowPrefix
            description: allows engineering IPv4 networks
            entries:
              - sequence: 10
                action: permit
                prefix: 192.0.2.0/23
                eq: 24
              - sequence: 20
                action: permit
                prefix: 198.51.100.128/26
          - name: DenyPrefix
            description: denies lab IPv4 networks
            entries:
              - sequence: 20
                action: deny
                prefix: 203.0.113.0/24
                le: 25

      - afi: ipv6
        prefix_lists:
          - name: AllowIPv6Prefix
            description: allows engineering IPv6 networks
            entries:
              - sequence: 8
                action: permit
                prefix: "2001:db8:400::/38"
              - sequence: 20
                action: permit
                prefix: "2001:db8:8000::/35"
                le: 37

# Task output
# -------------
# before: []
#
# commands:
#   - "ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks"
#   - "ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38"
#   - "ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37"
#   - "ip prefix-list AllowPrefix description allows engineering IPv4 networks"
#   - "ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24"
#   - "ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26"
#   - "ip prefix-list DenyPrefix description denies lab IPv4 networks"
#   - "ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25"
#
# after:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix

# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

# Using replaced

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Replace prefix-lists configurations of listed prefix-lists with provided configurations
  cisco.nxos.nxos_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: AllowPrefix
            description: allows engineering IPv4 networks
            entries:
              - sequence: 10
                action: permit
                prefix: 203.0.113.64/27

              - sequence: 30
                action: permit
                prefix: 203.0.113.96/27
          - name: AllowPrefix2Stub
            description: allow other engineering IPv4 network
    state: replaced

# Task output
# -------------
# before:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# commands:
#   - "no ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24"
#   - "ip prefix-list AllowPrefix seq 10 permit 203.0.113.64/27"
#   - "ip prefix-list AllowPrefix seq 30 permit 203.0.113.96/27"
#   - "no ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26"
#   - "ip prefix-list AllowPrefix2Stub description allow other engineering IPv4 network"
#
# after:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 203.0.113.64/27
#           - sequence: 30
#             action: permit
#             prefix: 203.0.113.96/27
#          name: AllowPrefix
#       - description: allow other engineering IPv4 network
#         name: AllowPrefix2Stub
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 203.0.113.64/27
# ip prefix-list AllowPrefix seq 30 permit 203.0.113.96/27
# ip prefix-list AllowPrefix2Stub description allow other engineering IPv4 network
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

# Using overridden

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Override all prefix-lists configuration with provided configuration
  cisco.nxos.nxos_prefix_lists: &id003
    config:
      - afi: ipv4
        prefix_lists:
          - name: AllowPrefix
            description: allows engineering IPv4 networks
            entries:
              - sequence: 10
                action: permit
                prefix: 203.0.113.64/27

              - sequence: 30
                action: permit
                prefix: 203.0.113.96/27
          - name: AllowPrefix2Stub
            description: allow other engineering IPv4 network
    state: overridden

# Task output
# -------------
# before:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# commands:
#   - "no ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24"
#   - "ip prefix-list AllowPrefix seq 10 permit 203.0.113.64/27"
#   - "ip prefix-list AllowPrefix seq 30 permit 203.0.113.96/27"
#   - "no ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26"
#   - "ip prefix-list AllowPrefix2Stub description allow other engineering IPv4 network"
#   - "no ip prefix-list DenyPrefix"
#   - "no ipv6 prefix-list AllowIPv6Prefix"
#
# after:
#   - afi: ipv4
#     prefix_lists:
#       - name: AllowPrefix
#         description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 203.0.113.64/27
#
#           - sequence: 30
#             action: permit
#             prefix: 203.0.113.96/27
#       - name: AllowPrefix2Stub
#         description: allow other engineering IPv4 network
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 203.0.113.64/27
# ip prefix-list AllowPrefix seq 30 permit 203.0.113.96/27
# ip prefix-list AllowPrefix2Stub description allow other engineering IPv4 network

# Using deleted to delete a all prefix lists for an AFI

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Delete all prefix-lists for an AFI
  cisco.nxos.nxos_prefix_lists:
    config:
      - afi: ipv4
    state: deleted
  register: result

# Task output
# -------------
# before:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# commands:
#   - "no ip prefix-list AllowPrefix"
#   - "no ip prefix-list DenyPrefix"
#
# after:
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

# Using deleted to delete a single prefix-list

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Delete a single prefix-list
  cisco.nxos.nxos_prefix_lists:
    config:
      - afi: ipv4
        prefix_lists:
          - name: AllowPrefix
    state: deleted

# Task output
# -------------
# before:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# commands:
#   - "no ip prefix-list AllowPrefix"
#
# after:
#   - afi: ipv4
#     prefix_lists:
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

# Using deleted to delete all prefix-lists from the device

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Delete all prefix-lists
  cisco.nxos.nxos_prefix_lists:
    state: deleted

# Task output
# -------------
# before:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix
#
# commands:
#   - "no ip prefix-list AllowPrefix"
#   - "no ip prefix-list DenyPrefix"
#   - "no ipv6 prefix-list AllowIPv6Prefix"
#
# after: []
#
# After state:
# ------------
# nxos-9k-rdo# show running-config | section 'ip(.*) prefix-list'
# nxos-9k-rdo#

# Using rendered

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_prefix_lists: &id001
    config:
      - afi: ipv4
        prefix_lists:
          - name: AllowPrefix
            description: allows engineering IPv4 networks
            entries:
              - sequence: 10
                action: permit
                prefix: 192.0.2.0/23
                eq: 24
              - sequence: 20
                action: permit
                prefix: 198.51.100.128/26
          - name: DenyPrefix
            description: denies lab IPv4 networks
            entries:
              - sequence: 20
                action: deny
                prefix: 203.0.113.0/24
                le: 25

      - afi: ipv6
        prefix_lists:
          - name: AllowIPv6Prefix
            description: allows engineering IPv6 networks
            entries:
              - sequence: 8
                action: permit
                prefix: "2001:db8:400::/38"
              - sequence: 20
                action: permit
                prefix: "2001:db8:8000::/35"
                le: 37
    state: rendered

# Task Output (redacted)
# -----------------------
# rendered:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix

# Using parsed

# parsed.cfg
# ------------
# ip prefix-list AllowPrefix description allows engineering IPv4 networks
# ip prefix-list AllowPrefix seq 10 permit 192.0.2.0/23 eq 24
# ip prefix-list AllowPrefix seq 20 permit 198.51.100.128/26
# ip prefix-list DenyPrefix description denies lab IPv4 networks
# ip prefix-list DenyPrefix seq 20 deny 203.0.113.0/24 le 25
# ipv6 prefix-list AllowIPv6Prefix description allows engineering IPv6 networks
# ipv6 prefix-list AllowIPv6Prefix seq 8 permit 2001:db8:400::/38
# ipv6 prefix-list AllowIPv6Prefix seq 20 permit 2001:db8:8000::/35 le 37

- name: Parse externally provided prefix-lists configuration
  register: result
  cisco.nxos.nxos_prefix_lists:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
# parsed:
#   - afi: ipv4
#     prefix_lists:
#       - description: allows engineering IPv4 networks
#         entries:
#           - sequence: 10
#             action: permit
#             prefix: 192.0.2.0/23
#             eq: 24
#           - sequence: 20
#             action: permit
#             prefix: 198.51.100.128/26
#         name: AllowPrefix
#       - description: denies lab IPv4 networks
#         entries:
#           - sequence: 20
#             action: deny
#             prefix: 203.0.113.0/24
#             le: 25
#         name: DenyPrefix
#
#   - afi: ipv6
#     prefix_lists:
#       - description: allows engineering IPv6 networks
#         entries:
#           - sequence: 8
#             action: permit
#             prefix: "2001:db8:400::/38"
#           - sequence: 20
#             action: permit
#             prefix: "2001:db8:8000::/35"
#             le: 37
#         name: AllowIPv6Prefix

Authors

  • Nilashish Chakraborty (@NilashishC)