cisco.nxos.nxos_static_routes – Static routes resource module
Note
This plugin is part of the cisco.nxos collection (version 2.8.2).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.nxos
.
To use it in a playbook, specify: cisco.nxos.nxos_static_routes
.
New in version 1.0.0: of cisco.nxos
Synopsis
This module configures and manages the attributes of static routes on Cisco NX-OS platforms.
Note
This module has a corresponding action plugin.
Parameters
Parameter |
Comments |
---|---|
A list of configurations for static routes |
|
A dictionary specifying the address family to which the static route(s) belong. |
|
Specifies the top level address family indicator. Choices:
|
|
A dictionary that specifies the static route configurations |
|
Destination prefix of static route The address format is <ipv4/v6 address>/<mask> The mask is number in range 0-32 for IPv4 and in range 0-128 for IPv6 |
|
Details of route to be taken |
|
Preference or administrative distance of route (range 1-255) |
|
VRF of the destination |
|
IP address of the next hop router |
|
Outgoing interface to take. For anything except ‘Null0’, then next hop IP address should also be configured. |
|
Name of the static route |
|
Route tag value (numeric) |
|
Track value (range 1 - 512). Track must already be configured on the device before adding the route. |
|
The VRF to which the static route(s) belong |
|
This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the following commands in order show running-config | include ‘^ip(v6* route’) and show running-config | section ‘^vrf context’. The state parsed reads the configuration from |
|
The state the configuration should be left in Choices:
|
Notes
Note
Tested against NX-OS 7.3.(0)D1(1) on VIRL
Unsupported for Cisco MDS
When a route is configured for a non-existent VRF, the VRF is created and the route is added to it.
When deleting routes for a VRF, all routes inside the VRF are deleted, but the VRF is not deleted.
Examples
# Using deleted:
# Before state:
# -------------
#
# ip route 192.0.2.32/28 192.0.2.12 name new_route
# ip route 192.0.2.26/24 192.0.2.13 tag 12
- name: Delete all routes
cisco.nxos.nxos_static_routes:
state: deleted
# After state:
# ------------
#
# Before state:
# ------------
#
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ip route 192.0.2.64/28 192.0.2.22 tag 4
# ip route 192.0.2.64/28 192.0.2.23 name merged_route 1
# ipv6 route 2200:10::/36 2048:ae12::1 vrf dest 5
- name: Delete routes based on VRF
cisco.nxos.nxos_static_routes:
config:
- vrf: trial_vrf
state: deleted
# After state:
# -----------
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# Before state:
# ------------
#
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ip route 192.0.2.64/28 192.0.2.22 tag 4
# ip route 192.0.2.64/28 192.0.2.23 name merged_route 1
# ipv6 route 2200:10::/36 2048:ae12::1 vrf dest 5
- name: Delete routes based on AFI in a VRF
cisco.nxos.nxos_static_routes:
config:
- vrf: trial_vrf
address_families:
- afi: ipv4
state: deleted
# After state:
# -----------
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ipv6 route 2200:10::/36 2048:ae12::1 vrf dest 5
# Before state:
# -----------
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# vrf context trial_vrf
# ipv6 route 2200:10::/36 2048:ae12::1 vrf dest 5
# Using merged
# Before state:
# -------------
#
- name: Merge new static route configuration
cisco.nxos.nxos_static_routes:
config:
- vrf: trial_vrf
address_families:
- afi: ipv4
routes:
- dest: 192.0.2.64/24
next_hops:
- forward_router_address: 192.0.2.22
tag: 4
admin_distance: 2
- address_families:
- afi: ipv4
routes:
- dest: 192.0.2.16/24
next_hops:
- forward_router_address: 192.0.2.24
route_name: new_route
- afi: ipv6
routes:
- dest: 2001:db8::/64
next_hops:
- interface: eth1/3
forward_router_address: 2001:db8::12
state: merged
# After state:
# ------------
#
# ip route 192.0.2.16/24 192.0.2.24 name new_route
# ipv6 route 2001:db8::/64 Ethernet1/3 2001:db8::12
# vrf context trial_vrf
# ip route 192.0.2.0/24 192.0.2.22 tag 4 2
# Using overridden:
# Before state:
# -------------
#
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ip route 192.0.2.64/28 192.0.2.22 tag 4
# ip route 192.0.2.64/28 192.0.2.23 name merged_route 1
- name: Overriden existing static route configuration with new configuration
cisco.nxos.nxos_static_routes:
config:
- vrf: trial_vrf
address_families:
- afi: ipv4
routes:
- dest: 192.0.2.16/28
next_hops:
- forward_router_address: 192.0.2.23
route_name: overridden_route1
admin_distance: 3
- forward_router_address: 192.0.2.45
route_name: overridden_route2
dest_vrf: destinationVRF
interface: Ethernet1/2
state: overridden
# After state:
# ------------
#
# ip route 192.0.2.16/28 192.0.2.23 name replaced_route1 3
# ip route 192.0.2.16/28 Ethernet1/2 192.0.2.45 vrf destinationVRF name replaced_route2
# Using replaced:
# Before state:
# ------------
# ip route 192.0.2.16/28 192.0.2.24 name new_route
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ip route 192.0.2.64/28 192.0.2.22 tag 4
# ip route 192.0.2.64/28 192.0.2.23 name merged_route 1
- name: Replaced the existing static configuration of a prefix with new configuration
cisco.nxos.nxos_static_routes:
config:
- address_families:
- afi: ipv4
routes:
- dest: 192.0.2.16/28
next_hops:
- forward_router_address: 192.0.2.23
route_name: replaced_route1
admin_distance: 3
- forward_router_address: 192.0.2.45
route_name: replaced_route2
dest_vrf: destinationVRF
interface: Ethernet1/2
state: replaced
# After state:
# -----------
# ip route 192.0.2.16/28 192.0.2.23 name replaced_route1 3
# ip route 192.0.2.16/28 Ethernet1/2 192.0.2.45 vrf destinationVRF name replaced_route2
# ip route 192.0.2.80/28 192.0.2.26 tag 12
# vrf context trial_vrf
# ip route 192.0.2.64/28 192.0.2.22 tag 4
# ip route 192.0.2.64/28 192.0.2.23 name merged_route 1
# Using gathered:
# Before state:
# -------------
# ipv6 route 2001:db8:12::/32 2001:db8::12
# vrf context Test
# ip route 192.0.2.48/28 192.0.2.13
# ip route 192.0.2.48/28 192.0.2.14 5
- name: Gather the exisitng condiguration
cisco.nxos.nxos_static_routes:
state: gathered
# returns:
# gathered:
# - vrf: Test
# address_families:
# - afi: ipv4
# routes:
# - dest: 192.0.2.48/28
# next_hops:
# - forward_router_address: 192.0.2.13
#
# - forward_router_address: 192.0.2.14
# admin_distance: 5
#
# - address_families:
# - afi: ipv6
# routes:
# - dest: 2001:db8:12::/32
# next_hops:
# - forward_router_address: 2001:db8::12
# Using rendered:
- name: Render required configuration to be pushed to the device
cisco.nxos.nxos_static_routes:
config:
- address_families:
- afi: ipv4
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.13
- afi: ipv6
routes:
- dest: 2001:db8::/64
next_hops:
- interface: eth1/3
forward_router_address: 2001:db8::12
state: rendered
# returns
# rendered:
# vrf context default
# ip route 192.0.2.48/28 192.0.2.13
# ipv6 route 2001:db8::/64 Ethernet1/3 2001:db8::12
# Using parsed
- name: Parse the config to structured data
cisco.nxos.nxos_static_routes:
running_config: |
ipv6 route 2002:db8:12::/32 2002:db8:12::1
vrf context Test
ip route 192.0.2.48/28 192.0.2.13
ip route 192.0.2.48/28 192.0.2.14 5
# returns:
# parsed:
# - vrf: Test
# address_families:
# - afi: ipv4
# routes:
# - dest: 192.0.2.48/28
# next_hops:
# - forward_router_address: 192.0.2.13
#
# - forward_router_address: 192.0.2.14
# admin_distance: 5
#
# - address_families:
# - afi: ipv6
# routes:
# - dest: 2002:db8:12::/32
# next_hops:
# - forward_router_address: 2002:db8:12::1
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The set of commands pushed to the remote device. Returned: always Sample: [“ip route 192.0.2.48/28 192.0.2.12 Ethernet1/2 name sample_route”, “ipv6 route 2001:db8:3000::/36 2001:db8:200:2::2”, “vrf context test”, “ip route 192.0.2.48/28 192.0.2.121”] |
Authors
Adharsh Srivats Rangarajan (@adharshsrivatsr)