cisco.ucs.ucs_storage_profile – Configures storage profiles on Cisco UCS Manager
Note
This plugin is part of the cisco.ucs collection (version 1.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ucs
.
To use it in a playbook, specify: cisco.ucs.ucs_storage_profile
.
New in version 2.7: of cisco.ucs
Parameters
Parameter |
Comments |
---|---|
The user-defined description of the storage profile. Enter up to 256 characters. You can use any characters or spaces except the following: ` (accent mark), (backslash), ^ (carat), ” (double quote), = (equal sign), > (greater than), < (less than), or ‘ (single quote). |
|
IP address or hostname of Cisco UCS Manager. Modules can be used with the UCS Platform Emulator https://cs.co/ucspe |
|
List of Local LUNs used by the storage profile. |
|
Whether the local LUN should be automatically deployed or not. Choices:
|
|
The disk group configuration policy to be applied to this local LUN. |
|
Specifies that this LUN can be expanded to use the entire available disk group. For each service profile, only one LUN can use this option. Expand To Available option is not supported for already deployed LUN. Choices:
|
|
Fractional size of this LUN in MB. Default: “0” |
|
The name of the local LUN. |
|
Size of this LUN in GB. The size can range from 1 to 10240 GB. Default: “1” |
|
If Choices:
|
|
The name of the storage profile. This name can be between 1 and 16 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), “_” (underscore), : (colon), and . (period). You cannot change this name after profile is created. |
|
The distinguished name (dn) of the organization where the resource is assigned. Default: “org-root” |
|
Password for Cisco UCS Manager authentication. |
|
Port number to be used during connection (by default uses 443 for https and 80 for http connection). |
|
If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’ |
|
If If Choices:
|
|
If Choices:
|
|
If Choices:
|
|
Username for Cisco UCS Manager authentication. Default: “admin” |
Examples
- name: Configure Storage Profile
cisco.ucs.ucs_storage_profile:
hostname: 172.16.143.150
username: admin
password: password
name: DEE-StgProf
local_luns:
- name: Boot-LUN
size: '60'
disk_policy_name: DEE-DG
- name: Data-LUN
size: '200'
disk_policy_name: DEE-DG
- name: Remove Storage Profile
cisco.ucs.ucs_storage_profile:
hostname: 172.16.143.150
username: admin
password: password
name: DEE-StgProf
state: absent
- name: Remove Local LUN from Storage Profile
cisco.ucs.ucs_storage_profile:
hostname: 172.16.143.150
username: admin
password: password
name: DEE-StgProf
local_luns:
- name: Data-LUN
state: absent
Authors
Sindhu Sudhir (@sisudhir)
David Soper (@dsoper2)
John McDonough (@movinalot)
CiscoUcs (@CiscoUcs)