cisco.ucs.ucs_wwn_pool – Configures WWNN or WWPN pools on Cisco UCS Manager
Note
This plugin is part of the cisco.ucs collection (version 1.6.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.ucs
.
To use it in a playbook, specify: cisco.ucs.ucs_wwn_pool
.
New in version 2.5: of cisco.ucs
Parameters
Parameter |
Comments |
---|---|
A description of the WWNN or WWPN pool. Enter up to 256 characters. You can use any characters or spaces except the following: ` (accent mark), (backslash), ^ (carat), ” (double quote), = (equal sign), > (greater than), < (less than), or ‘ (single quote). |
|
The first initiator in the World Wide Name (WWN) block. This is the From field in the UCS Manager Add WWN Blocks menu. |
|
IP address or hostname of Cisco UCS Manager. Modules can be used with the UCS Platform Emulator https://cs.co/ucspe |
|
The last initiator in the World Wide Name (WWN) block. This is the To field in the UCS Manager Add WWN Blocks menu. For WWxN pools, the pool size must be a multiple of ports-per-node + 1. For example, if there are 7 ports per node, the pool size must be a multiple of 8. If there are 63 ports per node, the pool size must be a multiple of 64. |
|
The name of the World Wide Node Name (WWNN) or World Wide Port Name (WWPN) pool. This name can be between 1 and 32 alphanumeric characters. You cannot use spaces or any special characters other than - (hyphen), “_” (underscore), : (colon), and . (period). You cannot change this name after the WWNN or WWPN pool is created. |
|
The Assignment Order field. This can be one of the following: default - Cisco UCS Manager selects a random identity from the pool. sequential - Cisco UCS Manager selects the lowest available identity from the pool. Choices:
|
|
Org dn (distinguished name) Default: “org-root” |
|
Password for Cisco UCS Manager authentication. |
|
Port number to be used during connection (by default uses 443 for https and 80 for http connection). |
|
If use_proxy is no, specfies proxy to be used for connection. e.g. ‘http://proxy.xy.z:8080’ |
|
Specify whether this is a node (WWNN) or port (WWPN) pool. Optional if state is absent. Choices:
|
|
If If Choices:
|
|
If Choices:
|
|
If Choices:
|
|
Username for Cisco UCS Manager authentication. Default: “admin” |
Examples
- name: Configure WWNN/WWPN pools
cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWNN-Pool
purpose: node
first_addr: 20:00:00:25:B5:48:00:00
last_addr: 20:00:00:25:B5:48:00:0F
- cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWPN-Pool-A
purpose: port
order: sequential
first_addr: 20:00:00:25:B5:48:0A:00
last_addr: 20:00:00:25:B5:48:0A:0F
- name: Remove WWNN/WWPN pools
cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWNN-Pool
state: absent
- cisco.ucs.ucs_wwn_pool:
hostname: 172.16.143.150
username: admin
password: password
name: WWPN-Pool-A
state: absent
Authors
David Soper (@dsoper2)
John McDonough (@movinalot)
CiscoUcs (@CiscoUcs)