dellemc.enterprise_sonic.sonic_bgp_neighbors_af – Manage the BGP neighbor address-family and its parameters

Note

This plugin is part of the dellemc.enterprise_sonic collection (version 1.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_bgp_neighbors_af.

New in version 1.0.0: of dellemc.enterprise_sonic

Synopsis

  • This module provides configuration management of BGP neighbors address-family parameters on devices running Enterprise SONiC.

  • bgp_as, vrf_name and neighbors need be created in advance on the device.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

Specifies the BGP neighbors address-family related configuration.

bgp_as

string / required

Specifies the BGP autonomous system (AS) number which is already configured on the device.

neighbors

list / elements=dictionary

Specifies BGP neighbor related configurations in address-family configuration mode.

address_family

list / elements=dictionary

Specifies BGP address-family related configurations.

afi and safi are required together.

activate

boolean

Enables the address-family for this neighbor.

Choices:

  • no

  • yes

afi

string / required

Type of address-family to configure.

Choices:

  • ipv4

  • ipv6

  • l2vpn

allowas_in

dictionary

Specifies the allowas in values.

origin

boolean

Specifies the origin value.

Choices:

  • no

  • yes

value

integer

Specifies the value of the allowas in.

route_map

list / elements=dictionary

Specifies the route-map.

direction

string

Specifies the direction of the route-map.

name

string

Specifies the name of the route-map.

route_reflector_client

boolean

Specifies a neighbor as a route-reflector client.

Choices:

  • no

  • yes

route_server_client

boolean

Specifies a neighbor as a route-server client.

Choices:

  • no

  • yes

safi

string

Specifies the type of cast for the address-family.

Choices:

  • unicast ← (default)

  • evpn

neighbor

string / required

Neighbor router address which is already configured on the device.

vrf_name

string

Specifies the VRF name which is already configured on the device.

Default: “default”

state

string

Specifies the operation to be performed on the BGP process that is configured on the device.

In case of merged, the input configuration is merged with the existing BGP configuration on the device.

In case of deleted, the existing BGP configuration is removed from the device.

Choices:

  • merged ← (default)

  • deleted

Notes

Note

  • Tested against Enterprise SONiC Distribution by Dell Technologies.

  • Supports check_mode.

Examples

# Using deleted
#
# Before state:
# -------------
#
#!
#router bgp 4
# !
# neighbor interface Eth1/3
#  !
#  address-family ipv4 unicast
#   activate
#   allowas-in 4
#   route-map aa in
#   route-map aa out
#   route-reflector-client
#   route-server-client
#   send-community both
#!
#
- name: Deletes neighbors address-family with specific values
  dellemc.enterprise_sonic.sonic_bgp_neighbors_af:
     config:
       - bgp_as: 4
         neighbors:
           - neighbor: Eth1/3
             address_family:
               - afi: ipv4
                 safi: unicast
                 allowas_in:
                   value: 4
                 route_map:
                   - name: aa
                     direction: in
                   - name: aa
                     direction: out
                 route_reflector_client: true
                 route_server_client: true
     state: deleted

# After state:
# ------------
#!
#router bgp 4
# !
# neighbor interface Eth1/3
#  !
#  address-family ipv4 unicast
#   send-community both
#!


# Using deleted
#
# Before state:
# -------------
#
#!
#router bgp 4
# !
# neighbor interface Eth1/3
#  !
#  address-family ipv4 unicast
#   activate
#   allowas-in 4
#   route-map aa in
#   route-map aa out
#   route-reflector-client
#   route-server-client
#   send-community both
#!
# neighbor interface Eth1/5
#  !
#  address-family ipv4 unicast
#   activate
#   allowas-in origin
#   send-community both
#!
#
- name: Deletes neighbors address-family with specific values
  dellemc.enterprise_sonic.sonic_bgp_neighbors_af:
     config:
     state: deleted

# After state:
# ------------
#!
#router bgp 4
#!


# Using deleted
#
# Before state:
# -------------
#
#!
#router bgp 4
# !
# neighbor interface Eth1/3
#!
#
- name: Merges neighbors address-family with specific values
  dellemc.enterprise_sonic.sonic_bgp_neighbors_af:
     config:
       - bgp_as: 4
         neighbors:
           - neighbor: Eth1/3
             address_family:
               - afi: ipv4
                 safi: unicast
                 allowas_in:
                   value: 4
                 route_map:
                   - name: aa
                     direction: in
                   - name: aa
                     direction: out
                 route_reflector_client: true
                 route_server_client: true
     state: merged

# After state:
# ------------
#!
#router bgp 4
# !
# neighbor interface Eth1/3
#  !
#  address-family ipv4 unicast
#   activate
#   allowas-in 4
#   route-map aa in
#   route-map aa out
#   route-reflector-client
#   route-server-client
#   send-community both
#!

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The resulting configuration model invocation.

Returned: when changed

Sample: “The configuration returned is always in the same format of the parameters above.\n”

before

list / elements=string

The configuration prior to the model invocation.

Returned: always

Sample: “The configuration returned is always in the same format of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“command 1”, “command 2”, “command 3”]

Authors

  • Niraimadaiselvam M (@niraimadaiselvamm)