dellemc.openmanage.redfish_storage_volume – Manages the storage volume configuration

Note

This plugin is part of the dellemc.openmanage collection (version 3.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.openmanage.

To use it in a playbook, specify: dellemc.openmanage.redfish_storage_volume.

New in version 2.1.0: of dellemc.openmanage

Synopsis

  • This module allows to create, modify, initialize, or delete a single storage volume.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7.5

Parameters

Parameter

Comments

baseuri

string / required

IP address of the target out-of-band controller. For example- <ipaddress>:<port>.

block_size_bytes

integer

Block size in bytes.Only applicable when state is present.

capacity_bytes

string

Volume size in bytes.

Only applicable when state is present.

command

string

initialize initializes an existing storage volume for a specified volume_id.

Choices:

  • initialize

controller_id

string

Fully Qualified Device Descriptor (FQDD) of the storage controller.

For example- RAID.Slot.1-1.

This option is mandatory when state is present while creating a volume.

drives

list / elements=string

FQDD of the Physical disks.

For example- Disk.Bay.0:Enclosure.Internal.0-1:RAID.Slot.1-1.

Only applicable when state is present when creating a new volume.

encrypted

boolean

Indicates whether volume is currently utilizing encryption or not.

Only applicable when state is present.

Choices:

  • no

  • yes

encryption_types

string

The following encryption types can be selected.

ControllerAssisted The volume is encrypted by the storage controller entity.

NativeDriveEncryption The volume utilizes the native drive encryption capabilities of the drive hardware.

SoftwareAssisted The volume is encrypted by the software running on the system or the operating system.

Only applicable when state is present.

Choices:

  • NativeDriveEncryption

  • ControllerAssisted

  • SoftwareAssisted

initialize_type

string

Initialization type of existing volume.

Only applicable when command is initialize.

Choices:

  • Fast ← (default)

  • Slow

name

string

Name of the volume to be created.

Only applicable when state is present.

oem

dictionary

Includes OEM extended payloads.

Only applicable when state is present.

optimum_io_size_bytes

integer

Stripe size value must be in multiples of 64 * 1024.

Only applicable when state is present.

password

string / required

Password of the target out-of-band controller.

state

string

present creates a storage volume for the specified I (controller_id), or modifies the storage volume for the specified I (volume_id). “Note: Modification of an existing volume properties depends on drive and controller capabilities”.

absent deletes the volume for the specified volume_id.

Choices:

  • present

  • absent

username

string / required

Username of the target out-of-band controller.

volume_id

string

FQDD of existing volume.

For example- Disk.Virtual.4:RAID.Slot.1-1.

This option is mandatory in the following scenarios,

state is present, when updating a volume.

state is absent, when deleting a volume.

command is initialize, when initializing a volume.

volume_type

string

One of the following volume types must be selected to create a volume.

Mirrored The volume is a mirrored device.

NonRedundant The volume is a non-redundant storage device.

SpannedMirrors The volume is a spanned set of mirrored devices.

SpannedStripesWithParity The volume is a spanned set of devices which uses parity to retain redundant information.

StripedWithParity The volume is a device which uses parity to retain redundant information.

Choices:

  • NonRedundant

  • Mirrored

  • StripedWithParity

  • SpannedMirrors

  • SpannedStripesWithParity

Notes

Note

  • Run this module from a system that has direct access to Redfish APIs.

  • This module does not support check_mode.

Examples

---
- name: Create a volume with supported options
  dellemc.openmanage.redfish_storage_volume:
    baseuri: "192.168.0.1"
    username: "username"
    password: "password"
    state: "present"
    volume_type: "Mirrored"
    name: "VD0"
    controller_id: "RAID.Slot.1-1"
    drives:
      - Disk.Bay.5:Enclosure.Internal.0-1:RAID.Slot.1-1
      - Disk.Bay.6:Enclosure.Internal.0-1:RAID.Slot.1-1
    block_size_bytes: 512
    capacity_bytes: 299439751168
    optimum_io_size_bytes: 65536
    encryption_types: NativeDriveEncryption
    encrypted: true

- name: Create a volume with minimum options
  dellemc.openmanage.redfish_storage_volume:
    baseuri: "192.168.0.1"
    username: "username"
    password: "password"
    state: "present"
    controller_id: "RAID.Slot.1-1"
    volume_type: "NonRedundant"
    drives:
       - Disk.Bay.1:Enclosure.Internal.0-1:RAID.Slot.1-1

- name: Modify a volume's encryption type settings
  dellemc.openmanage.redfish_storage_volume:
    baseuri: "192.168.0.1"
    username: "username"
    password: "password"
    state: "present"
    volume_id: "Disk.Virtual.5:RAID.Slot.1-1"
    encryption_types: "ControllerAssisted"
    encrypted: true

- name: Delete an existing volume
  dellemc.openmanage.redfish_storage_volume:
    baseuri: "192.168.0.1"
    username: "username"
    password: "password"
    state: "absent"
    volume_id: "Disk.Virtual.5:RAID.Slot.1-1"

- name: Initialize an existing volume
  dellemc.openmanage.redfish_storage_volume:
    baseuri: "192.168.0.1"
    username: "username"
    password: "password"
    command: "initialize"
    volume_id: "Disk.Virtual.6:RAID.Slot.1-1"
    initialize_type: "Slow"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

error_info

dictionary

Details of a http error.

Returned: on http error

Sample: {“error”: {“@Message.ExtendedInfo”: [{“Message”: “Unable to perform configuration operations because a configuration job for the device already exists.”, “MessageArgs”: [], “MessageArgs@odata.count”: 0, “MessageId”: “IDRAC.1.6.STOR023”, “RelatedProperties”: [], “RelatedProperties@odata.count”: 0, “Resolution”: “Wait for the current job for the device to complete or cancel the current job before attempting more configuration operations on the device.”, “Severity”: “Informational”}], “code”: “Base.1.2.GeneralError”, “message”: “A general error has occurred. See ExtendedInfo for more information”}}

msg

string

Overall status of the storage configuration operation.

Returned: always

Sample: “Successfully submitted create volume task.”

task

dictionary

Returns ID and URI of the created task.

Returned: success

Sample: {“id”: “JID_XXXXXXXXXXXXX”, “uri”: “/redfish/v1/TaskService/Tasks/JID_XXXXXXXXXXXXX”}

Authors

  • Sajna Shetty(@Sajna-Shetty)