fortinet.fortimanager.fmgr_fsp_vlan_dynamicmapping – no description
Note
This plugin is part of the fortinet.fortimanager collection (version 2.1.4).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install fortinet.fortimanager.
To use it in a playbook, specify: fortinet.fortimanager.fmgr_fsp_vlan_dynamicmapping.
New in version 2.10: of fortinet.fortimanager
Synopsis
This module is able to configure a FortiManager device.
Examples include all parameters and values which need to be adjusted to data sources before usage.
Parameters
Parameter |
Comments |
|---|---|
the parameter (adom) in requested url |
|
only set to True when module schema diffs with FortiManager API structure, module continues to execute without validating parameters Choices:
|
|
Enable/Disable logging for task Choices:
|
|
the top level parameters set |
|
_Dhcp-Status. Choices:
|
|
no description |
|
Name. |
|
Vdom. |
|
no description |
|
Enable/disable auto configuration. Choices:
|
|
Enable/disable use of this DHCP server once this interface has been assigned an IP address from FortiIPAM. Choices:
|
|
Time in seconds to wait after a conflicted IP address is removed from the DHCP range before it can be reused. |
|
DDNS authentication mode. Choices:
|
|
DDNS update key (base 64 encoding). |
|
DDNS update key name. |
|
DDNS server IP. |
|
TTL. |
|
Enable/disable DDNS update for DHCP. Choices:
|
|
Enable/disable DDNS update override for DHCP. Choices:
|
|
Zone of your domain name (ex. DDNS.com). |
|
Default gateway IP address assigned by the DHCP server. |
|
Enable/disable populating of DHCP server settings from FortiIPAM. Choices:
|
|
DNS server 1. |
|
DNS server 2. |
|
DNS server 3. |
|
DNS server 4. |
|
Options for assigning DNS servers to DHCP clients. Choices:
|
|
Domain name suffix for the IP addresses that the DHCP server assigns to clients. |
|
Enable. Choices:
|
|
no description |
|
End of IP range. |
|
ID. |
|
Start of IP range. |
|
Name of the boot file on the TFTP server. |
|
Enable/disable FortiClient-On-Net service for this DHCP server. Choices:
|
|
ID. |
|
Method used to assign client IP. Choices:
|
|
no description |
|
End of IP range. |
|
ID. |
|
Start of IP range. |
|
DHCP over IPsec leases expire this many seconds after tunnel down (0 to disable forced-expiry). |
|
Lease time in seconds, 0 means unlimited. |
|
MAC access control default action (allow or block assigning IP settings). Choices:
|
|
Netmask assigned by the DHCP server. |
|
IP address of a server (for example, a TFTP sever) that DHCP clients can download a boot file from. |
|
NTP server 1. |
|
NTP server 2. |
|
NTP server 3. |
|
Options for assigning Network Time Protocol (NTP) servers to DHCP clients. Choices:
|
|
no description |
|
no description |
|
no description |
|
Option4. |
|
Option5. |
|
Option6. |
|
no description |
|
DHCP option code. |
|
ID. |
|
no description |
|
DHCP option type. Choices:
|
|
DHCP option value. |
|
no description |
|
Options for the DHCP server to configure the client with the reserved MAC address. Choices:
|
|
Option 82 circuit-ID of the client that will get the reserved IP address. |
|
DHCP option type. Choices:
|
|
Description. |
|
ID. |
|
IP address to be reserved for the MAC address. |
|
MAC address of the client that will get the reserved IP address. |
|
Option 82 remote-ID of the client that will get the reserved IP address. |
|
DHCP option type. Choices:
|
|
DHCP reserved-address type. Choices:
|
|
DHCP server can be a normal DHCP server or an IPsec DHCP server. Choices:
|
|
Enable/disable this DHCP configuration. Choices:
|
|
no description |
|
Select the time zone to be assigned to DHCP clients. Choices:
|
|
Options for the DHCP server to set the clients time zone. Choices:
|
|
Enable/disable vendor class identifier (VCI) matching. When enabled only DHCP requests with a matching VCI are served. Choices:
|
|
no description |
|
Options for assigning WiFi Access Controllers to DHCP clients Choices:
|
|
WiFi Access Controller 1 IP address (DHCP option 138, RFC 5417). |
|
WiFi Access Controller 2 IP address (DHCP option 138, RFC 5417). |
|
WiFi Access Controller 3 IP address (DHCP option 138, RFC 5417). |
|
WINS server 1. |
|
WINS server 2. |
|
no description |
|
Dhcp-Relay-Agent-Option. Choices:
|
|
no description |
|
Dhcp-Relay-Service. Choices:
|
|
Dhcp-Relay-Type. Choices:
|
|
Ip. |
|
no description |
|
Enable/disable address auto config. Choices:
|
|
Cli-Conn6-Status. |
|
no description Choices:
|
|
Enable/disable DHCPv6 information request. Choices:
|
|
Enable/disable DHCPv6 prefix delegation. Choices:
|
|
DHCPv6 prefix that will be used as a hint to the upstream DHCPv6 server. |
|
DHCPv6 prefix hint preferred life time (sec), 0 means unlimited lease time. |
|
DHCPv6 prefix hint valid life time (sec). |
|
DHCPv6 relay IP address. |
|
Enable/disable DHCPv6 relay. Choices:
|
|
DHCPv6 relay type. Choices:
|
|
Enable/disable sending of ICMPv6 redirects. Choices:
|
|
IPv6 interface identifier. |
|
Primary IPv6 address prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx |
|
no description Choices:
|
|
Default life (sec). |
|
no description |
|
Enable/disable the autonomous flag. Choices:
|
|
Enable/disable the onlink flag. Choices:
|
|
Prefix ID. |
|
no description |
|
Recursive DNS service option. Choices:
|
|
Add subnet ID to routing prefix. |
|
Name of the interface that provides delegated information. |
|
Enable/disable using the DNS server acquired by DHCP. Choices:
|
|
no description |
|
IPv6 address prefix. |
|
Hop limit (0 means unspecified). |
|
IPv6 link MTU. |
|
Enable/disable the managed flag. Choices:
|
|
IPv6 maximum interval (4 to 1800 sec). |
|
IPv6 minimum interval (3 to 1350 sec). |
|
Addressing mode (static, DHCP, delegated). Choices:
|
|
Enable/disable the other IPv6 flag. Choices:
|
|
no description |
|
Enable/disable the autonomous flag. Choices:
|
|
no description |
|
Enable/disable the onlink flag. Choices:
|
|
Preferred life time (sec). |
|
IPv6 prefix. |
|
no description |
|
Valid life time (sec). |
|
Assigning a prefix from DHCP or RA. Choices:
|
|
IPv6 reachable time (milliseconds; 0 means unspecified). |
|
IPv6 retransmit time (milliseconds; 0 means unspecified). |
|
Enable/disable sending advertisements about the interface. Choices:
|
|
Subnet to routing prefix, syntax: xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx/xxx |
|
Interface name providing delegated information. |
|
Neighbor discovery certificate. |
|
Neighbor discovery CGA modifier. |
|
Neighbor discovery mode. Choices:
|
|
Neighbor discovery security level (0 - 7; 0 = least secure, default = 0). |
|
Neighbor discovery timestamp delta value (1 - 3600 sec; default = 300). |
|
Neighbor discovery timestamp fuzz factor (1 - 60 sec; default = 1). |
|
Enable/disable sending link MTU in RA packet. Choices:
|
|
Enable/disable unique auto config address. Choices:
|
|
Link-local IPv6 address of virtual router. |
|
Enable/disable virtual MAC for VRRP. Choices:
|
|
no description |
|
Enable/disable accept mode. Choices:
|
|
Advertisement interval (1 - 255 seconds). |
|
Enable/disable preempt mode. Choices:
|
|
Priority of the virtual router (1 - 255). |
|
Startup time (1 - 255 seconds). |
|
Enable/disable VRRP. Choices:
|
|
Monitor the route to this destination. |
|
VRRP group ID (1 - 65535). |
|
Virtual router identifier (1 - 255). |
|
IPv6 address of the virtual router. |
|
Secondary-Ip. Choices:
|
|
no description |
|
no description Choices:
|
|
no description Choices:
|
|
Gateways ping server for this IP. |
|
Enable/disable detect gateway alive for first. Choices:
|
|
HA election priority for the PING server. |
|
ID. |
|
Secondary IP address of the interface. |
|
Ping-Serv-Status. |
|
Seq. |
|
Vlanid. |
|
The overridden method for the underlying Json RPC request Choices:
|
|
the rc codes list with which the conditions to fail will be overriden |
|
the rc codes list with which the conditions to succeed will be overriden |
|
the directive to create, update or delete an object Choices:
|
|
the parameter (vlan) in requested url |
|
the adom to lock for FortiManager running in workspace mode, the value can be global and others including root |
|
the maximum time in seconds to wait for other user to release the workspace lock Default: 300 |
Notes
Note
Running in workspace locking mode is supported in this FortiManager module, the top level parameters workspace_locking_adom and workspace_locking_timeout help do the work.
To create or update an object, use state present directive.
To delete an object, use state absent directive.
Normally, running one module can fail when a non-zero rc is returned. you can also override the conditions to fail or succeed with parameters rc_failed and rc_succeeded
Examples
- hosts: fortimanager-inventory
collections:
- fortinet.fortimanager
connection: httpapi
vars:
ansible_httpapi_use_ssl: True
ansible_httpapi_validate_certs: False
ansible_httpapi_port: 443
tasks:
- name: no description
fmgr_fsp_vlan_dynamicmapping:
bypass_validation: False
workspace_locking_adom: <value in [global, custom adom including root]>
workspace_locking_timeout: 300
rc_succeeded: [0, -2, -3, ...]
rc_failed: [-2, -3, ...]
adom: <your own value>
vlan: <your own value>
state: <value in [present, absent]>
fsp_vlan_dynamicmapping:
_dhcp-status: <value in [disable, enable]>
_scope:
-
name: <value of string>
vdom: <value of string>
dhcp-server:
auto-configuration: <value in [disable, enable]>
auto-managed-status: <value in [disable, enable]>
conflicted-ip-timeout: <value of integer>
ddns-auth: <value in [disable, tsig]>
ddns-key: <value of string>
ddns-keyname: <value of string>
ddns-server-ip: <value of string>
ddns-ttl: <value of integer>
ddns-update: <value in [disable, enable]>
ddns-update-override: <value in [disable, enable]>
ddns-zone: <value of string>
default-gateway: <value of string>
dhcp-settings-from-fortiipam: <value in [disable, enable]>
dns-server1: <value of string>
dns-server2: <value of string>
dns-server3: <value of string>
dns-server4: <value of string>
dns-service: <value in [default, specify, local]>
domain: <value of string>
enable: <value in [disable, enable]>
exclude-range:
-
end-ip: <value of string>
id: <value of integer>
start-ip: <value of string>
filename: <value of string>
forticlient-on-net-status: <value in [disable, enable]>
id: <value of integer>
ip-mode: <value in [range, usrgrp]>
ip-range:
-
end-ip: <value of string>
id: <value of integer>
start-ip: <value of string>
ipsec-lease-hold: <value of integer>
lease-time: <value of integer>
mac-acl-default-action: <value in [assign, block]>
netmask: <value of string>
next-server: <value of string>
ntp-server1: <value of string>
ntp-server2: <value of string>
ntp-server3: <value of string>
ntp-service: <value in [default, specify, local]>
option1: <value of string>
option2: <value of string>
option3: <value of string>
option4: <value of string>
option5: <value of string>
option6: <value of string>
options:
-
code: <value of integer>
id: <value of integer>
ip: <value of string>
type: <value in [hex, string, ip, ...]>
value: <value of string>
reserved-address:
-
action: <value in [assign, block, reserved]>
circuit-id: <value of string>
circuit-id-type: <value in [hex, string]>
description: <value of string>
id: <value of integer>
ip: <value of string>
mac: <value of string>
remote-id: <value of string>
remote-id-type: <value in [hex, string]>
type: <value in [mac, option82]>
server-type: <value in [regular, ipsec]>
status: <value in [disable, enable]>
tftp-server: <value of string>
timezone: <value in [00, 01, 02, ...]>
timezone-option: <value in [disable, default, specify]>
vci-match: <value in [disable, enable]>
vci-string: <value of string>
wifi-ac-service: <value in [specify, local]>
wifi-ac1: <value of string>
wifi-ac2: <value of string>
wifi-ac3: <value of string>
wins-server1: <value of string>
wins-server2: <value of string>
interface:
dhcp-relay-agent-option: <value in [disable, enable]>
dhcp-relay-ip: <value of string>
dhcp-relay-service: <value in [disable, enable]>
dhcp-relay-type: <value in [regular, ipsec]>
ip: <value of string>
ipv6:
autoconf: <value in [disable, enable]>
dhcp6-client-options:
- rapid
- iapd
- iana
- dns
- dnsname
dhcp6-information-request: <value in [disable, enable]>
dhcp6-prefix-delegation: <value in [disable, enable]>
dhcp6-prefix-hint: <value of string>
dhcp6-prefix-hint-plt: <value of integer>
dhcp6-prefix-hint-vlt: <value of integer>
dhcp6-relay-ip: <value of string>
dhcp6-relay-service: <value in [disable, enable]>
dhcp6-relay-type: <value in [regular]>
icmp6-send-redirect: <value in [disable, enable]>
interface-identifier: <value of string>
ip6-address: <value of string>
ip6-allowaccess:
- https
- ping
- ssh
- snmp
- http
- telnet
- fgfm
- capwap
- fabric
ip6-default-life: <value of integer>
ip6-delegated-prefix-list:
-
autonomous-flag: <value in [disable, enable]>
onlink-flag: <value in [disable, enable]>
prefix-id: <value of integer>
rdnss: <value of string>
rdnss-service: <value in [delegated, default, specify]>
subnet: <value of string>
upstream-interface: <value of string>
ip6-dns-server-override: <value in [disable, enable]>
ip6-extra-addr:
-
prefix: <value of string>
ip6-hop-limit: <value of integer>
ip6-link-mtu: <value of integer>
ip6-manage-flag: <value in [disable, enable]>
ip6-max-interval: <value of integer>
ip6-min-interval: <value of integer>
ip6-mode: <value in [static, dhcp, pppoe, ...]>
ip6-other-flag: <value in [disable, enable]>
ip6-prefix-list:
-
autonomous-flag: <value in [disable, enable]>
dnssl: <value of string>
onlink-flag: <value in [disable, enable]>
preferred-life-time: <value of integer>
prefix: <value of string>
rdnss: <value of string>
valid-life-time: <value of integer>
ip6-reachable-time: <value of integer>
ip6-retrans-time: <value of integer>
ip6-send-adv: <value in [disable, enable]>
ip6-subnet: <value of string>
ip6-upstream-interface: <value of string>
nd-cert: <value of string>
nd-cga-modifier: <value of string>
nd-mode: <value in [basic, SEND-compatible]>
nd-security-level: <value of integer>
nd-timestamp-delta: <value of integer>
nd-timestamp-fuzz: <value of integer>
unique-autoconf-addr: <value in [disable, enable]>
vrip6_link_local: <value of string>
vrrp-virtual-mac6: <value in [disable, enable]>
vrrp6:
-
accept-mode: <value in [disable, enable]>
adv-interval: <value of integer>
preempt: <value in [disable, enable]>
priority: <value of integer>
start-time: <value of integer>
status: <value in [disable, enable]>
vrdst6: <value of string>
vrgrp: <value of integer>
vrid: <value of integer>
vrip6: <value of string>
cli-conn6-status: <value of integer>
ip6-prefix-mode: <value in [dhcp6, ra]>
ra-send-mtu: <value in [disable, enable]>
secondary-IP: <value in [disable, enable]>
secondaryip:
-
allowaccess:
- https
- ping
- ssh
- snmp
- http
- telnet
- fgfm
- auto-ipsec
- radius-acct
- probe-response
- capwap
- dnp
- ftm
- fabric
detectprotocol:
- ping
- tcp-echo
- udp-echo
detectserver: <value of string>
gwdetect: <value in [disable, enable]>
ha-priority: <value of integer>
id: <value of integer>
ip: <value of string>
ping-serv-status: <value of integer>
seq: <value of integer>
vlanid: <value of integer>
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The full url requested Returned: always Sample: “/sys/login/user” |
|
The status of api request Returned: always Sample: 0 |
|
The descriptive message of the api response Returned: always Sample: “OK.” |
Authors
Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Frank Shen (@fshen01)
Hongbin Lu (@fgtdev-hblu)