fortinet.fortios.fortios_router_multicast6 – Configure IPv6 multicast in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.3).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_router_multicast6
.
New in version 2.10: of fortinet.fortios
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and multicast6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.9.0
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Configure IPv6 multicast. |
|
Protocol Independent Multicast (PIM) interfaces. |
|
Time before old neighbour information expires (1 - 65535 sec). |
|
Interval between sending PIM hello messages (1 - 65535 sec).. |
|
Interface name. Source system.interface.name. |
|
Enable/disable PMTU for IPv6 multicast. Choices:
|
|
Enable/disable IPv6 multicast routing. Choices:
|
|
PIM sparse-mode global settings. |
|
Limit of packets/sec per source registered through this RP (0 means unlimited). |
|
Statically configured RP addresses. |
|
ID of the entry. |
|
RP router IPv6 address. |
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root” |
Examples
- collections:
- fortinet.fortios
connection: httpapi
hosts: fortigate01
vars:
ansible_httpapi_port: 443
ansible_httpapi_use_ssl: true
ansible_httpapi_validate_certs: false
vdom: root
tasks:
- name: fortios_router_multicast6
fortios_router_multicast6:
vdom: root
router_multicast6:
multicast_pmtu: disable
multicast_routing: disable
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: “1547” |
|
Last method used to provision the content into FortiGate Returned: always Sample: “PUT” |
|
Last result given by FortiGate on last operation applied Returned: always Sample: “200” |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: “id” |
|
Name of the table used to fulfill the request Returned: always Sample: “urlfilter” |
|
Path of the table used to fulfill the request Returned: always Sample: “webfilter” |
|
Internal revision number Returned: always Sample: “17.0.2.10658” |
|
Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352” |
|
Indication of the operation’s result Returned: always Sample: “success” |
|
Virtual domain used Returned: always Sample: “root” |
|
Version of the FortiGate Returned: always Sample: “v5.6.3” |
Authors
Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)