You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

fortinet.fortios.fortios_router_ospf6 – Configure IPv6 OSPF in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_router_ospf6.

New in version 2.10: of fortinet.fortios

Synopsis

• This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify router feature and ospf6 category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

• ansible>=2.9.0

Parameters

Parameter	Comments
access_token string	Token-based authentication. Generated from GUI of Fortigate.
enable_log boolean	Enable/Disable logging for task. Choices: no ← (default) yes
member_path string	Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation.
member_state string	Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices: present absent
router_ospf6 dictionary	Configure IPv6 OSPF.
abr_type string	Area border router type. Choices: cisco ibm standard
area list / elements=string	OSPF6 area configuration.
authentication string	Authentication mode. Choices: none ah esp
default_cost integer	Summary default cost of stub or NSSA area.
id string / required	Area entry IP address.
ipsec_auth_alg string	Authentication algorithm. Choices: md5 sha1 sha256 sha384 sha512
ipsec_enc_alg string	Encryption algorithm. Choices: None ← (default) des 3des aes128 aes192 aes256
ipsec_keys list / elements=string	IPsec authentication and encryption keys.
auth_key string	Authentication key.
enc_key string	Encryption key.
spi integer / required	Security Parameters Index.
key_rollover_interval integer	Key roll-over interval.
nssa_default_information_originate string	Enable/disable originate type 7 default into NSSA area. Choices: enable disable
nssa_default_information_originate_metric integer	OSPFv3 default metric.
nssa_default_information_originate_metric_type string	OSPFv3 metric type for default routes. Choices: 1 2
nssa_redistribution string	Enable/disable redistribute into NSSA area. Choices: enable disable
nssa_translator_role string	NSSA translator role type. Choices: candidate never always
range list / elements=string	OSPF6 area range configuration.
advertise string	Enable/disable advertise status. Choices: disable enable
id integer / required	Range entry ID.
prefix6 string	IPv6 prefix.
stub_type string	Stub summary setting. Choices: no-summary summary
type string	Area type setting. Choices: regular nssa stub
virtual_link list / elements=string	OSPF6 virtual link configuration.
authentication string	Authentication mode. Choices: none ah esp area
dead_interval integer	Dead interval.
hello_interval integer	Hello interval.
ipsec_auth_alg string	Authentication algorithm. Choices: md5 sha1 sha256 sha384 sha512
ipsec_enc_alg string	Encryption algorithm. Choices: None ← (default) des 3des aes128 aes192 aes256
ipsec_keys list / elements=string	IPsec authentication and encryption keys.
auth_key string	Authentication key.
enc_key string	Encryption key.
spi integer / required	Security Parameters Index.
key_rollover_interval integer	Key roll-over interval.
name string / required	Virtual link entry name.
peer string	A.B.C.D, peer router ID.
retransmit_interval integer	Retransmit interval.
transmit_delay integer	Transmit delay.
auto_cost_ref_bandwidth integer	Reference bandwidth in terms of megabits per second.
bfd string	Enable/disable Bidirectional Forwarding Detection (BFD). Choices: enable disable
default_information_metric integer	Default information metric.
default_information_metric_type string	Default information metric type. Choices: 1 2
default_information_originate string	Enable/disable generation of default route. Choices: enable always disable
default_information_route_map string	Default information route map. Source router.route-map.name.
default_metric integer	Default metric of redistribute routes.
log_neighbour_changes string	Enable logging of OSPFv3 neighbour”s changes Choices: enable disable
ospf6_interface list / elements=string	OSPF6 interface configuration.
area_id string	A.B.C.D, in IPv4 address format.
authentication string	Authentication mode. Choices: none ah esp area
bfd string	Enable/disable Bidirectional Forwarding Detection (BFD). Choices: global enable disable
cost integer	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
dead_interval integer	Dead interval.
hello_interval integer	Hello interval.
interface string	Configuration interface name. Source system.interface.name.
ipsec_auth_alg string	Authentication algorithm. Choices: md5 sha1 sha256 sha384 sha512
ipsec_enc_alg string	Encryption algorithm. Choices: None ← (default) des 3des aes128 aes192 aes256
ipsec_keys list / elements=string	IPsec authentication and encryption keys.
auth_key string	Authentication key.
enc_key string	Encryption key.
spi integer / required	Security Parameters Index.
key_rollover_interval integer	Key roll-over interval.
mtu integer	MTU for OSPFv3 packets.
mtu_ignore string	Enable/disable ignoring MTU field in DBD packets. Choices: enable disable
name string / required	Interface entry name.
neighbor list / elements=string	OSPFv3 neighbors are used when OSPFv3 runs on non-broadcast media
cost integer	Cost of the interface, value range from 0 to 65535, 0 means auto-cost.
ip6 string / required	IPv6 link local address of the neighbor.
poll_interval integer	Poll interval time in seconds.
priority integer	priority
network_type string	Network type. Choices: broadcast point-to-point non-broadcast point-to-multipoint point-to-multipoint-non-broadcast
priority integer	priority
retransmit_interval integer	Retransmit interval.
status string	Enable/disable OSPF6 routing on this interface. Choices: disable enable
transmit_delay integer	Transmit delay.
passive_interface list / elements=string	Passive interface configuration.
name string / required	Passive interface name. Source system.interface.name.
redistribute list / elements=string	Redistribute configuration.
metric integer	Redistribute metric setting.
metric_type string	Metric type. Choices: 1 2
name string / required	Redistribute name.
routemap string	Route map name. Source router.route-map.name.
status string	status Choices: enable disable
router_id string	A.B.C.D, in IPv4 address format.
spf_timers string	SPF calculation frequency.
summary_address list / elements=string	IPv6 address summary configuration.
advertise string	Enable/disable advertise status. Choices: disable enable
id integer / required	Summary address entry ID.
prefix6 string	IPv6 prefix.
tag integer	Tag value.
vdom string	Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root”

Notes

Note

• Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- collections:
  - fortinet.fortios
  connection: httpapi
  hosts: fortigate01
  vars:
    ansible_httpapi_port: 443
    ansible_httpapi_use_ssl: true
    ansible_httpapi_validate_certs: false
    vdom: root
  tasks:
  - name: fortios_router_ospf6
    fortios_router_ospf6:
      vdom: root
      router_ospf6:
        abr_type: standard
        auto_cost_ref_bandwidth: 1000
        bfd: disable
        default_information_metric: 10
        default_information_metric_type: '2'
        default_information_originate: disable
        default_metric: 10
        log_neighbour_changes: enable
        router_id: 0.0.0.0
        spf_timers: 5 10

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key	Description
build string	Build number of the fortigate image Returned: always Sample: “1547”
http_method string	Last method used to provision the content into FortiGate Returned: always Sample: “PUT”
http_status string	Last result given by FortiGate on last operation applied Returned: always Sample: “200”
mkey string	Master key (id) used in the last call to FortiGate Returned: success Sample: “id”
name string	Name of the table used to fulfill the request Returned: always Sample: “urlfilter”
path string	Path of the table used to fulfill the request Returned: always Sample: “webfilter”
revision string	Internal revision number Returned: always Sample: “17.0.2.10658”
serial string	Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352”
status string	Indication of the operation’s result Returned: always Sample: “success”
vdom string	Virtual domain used Returned: always Sample: “root”
version string	Version of the FortiGate Returned: always Sample: “v5.6.3”

Authors

• Link Zheng (@chillancezen)

• Jie Xue (@JieX19)

• Hongbin Lu (@fgtdev-hblu)

• Frank Shen (@frankshen01)

• Miguel Angel Munoz (@mamunozgonzalez)

• Nicolas Thomas (@thomnico)