fortinet.fortios.fortios_vpn_ipsec_phase2_interface – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate.

Note

This plugin is part of the fortinet.fortios collection (version 2.1.3).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install fortinet.fortios.

To use it in a playbook, specify: fortinet.fortios.fortios_vpn_ipsec_phase2_interface.

New in version 2.10: of fortinet.fortios

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and phase2_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0

Requirements

The below requirements are needed on the host that executes this module.

  • ansible>=2.9.0

Parameters

Parameter

Comments

access_token

string

Token-based authentication. Generated from GUI of Fortigate.

enable_log

boolean

Enable/Disable logging for task.

Choices:

  • no ← (default)

  • yes

member_path

string

Member attribute path to operate on.

Delimited by a slash character if there are more than one attribute.

Parameter marked with member_path is legitimate for doing member operation.

member_state

string

Add or delete a member under specified attribute path.

When member_state is specified, the state option is ignored.

Choices:

  • present

  • absent

state

string / required

Indicates whether to create or remove the object.

Choices:

  • present

  • absent

vdom

string

Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Default: “root”

vpn_ipsec_phase2_interface

dictionary

Configure VPN autokey tunnel.

add_route

string

Enable/disable automatic route addition.

Choices:

  • phase1

  • enable

  • disable

auto_discovery_forwarder

string

Enable/disable forwarding short-cut messages.

Choices:

  • phase1

  • enable

  • disable

auto_discovery_sender

string

Enable/disable sending short-cut messages.

Choices:

  • phase1

  • enable

  • disable

auto_negotiate

string

Enable/disable IPsec SA auto-negotiation.

Choices:

  • enable

  • disable

comments

string

Comment.

dhcp_ipsec

string

Enable/disable DHCP-IPsec.

Choices:

  • enable

  • disable

dhgrp

list / elements=string

Phase2 DH group.

Choices:

  • 1

  • 2

  • 5

  • 14

  • 15

  • 16

  • 17

  • 18

  • 19

  • 20

  • 21

  • 27

  • 28

  • 29

  • 30

  • 31

  • 32

diffserv

string

Enable/disable applying DSCP value to the IPsec tunnel outer IP header.

Choices:

  • enable

  • disable

diffservcode

string

DSCP value to be applied to the IPsec tunnel outer IP header.

dst_addr_type

string

Remote proxy ID type.

Choices:

  • subnet

  • range

  • ip

  • name

  • subnet6

  • range6

  • ip6

  • name6

dst_end_ip

string

Remote proxy ID IPv4 end.

dst_end_ip6

string

Remote proxy ID IPv6 end.

dst_name

string

Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name.

dst_name6

string

Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.

dst_port

integer

Quick mode destination port (1 - 65535 or 0 for all).

dst_start_ip

string

Remote proxy ID IPv4 start.

dst_start_ip6

string

Remote proxy ID IPv6 start.

dst_subnet

string

Remote proxy ID IPv4 subnet.

dst_subnet6

string

Remote proxy ID IPv6 subnet.

encapsulation

string

ESP encapsulation mode.

Choices:

  • tunnel-mode

  • transport-mode

initiator_ts_narrow

string

Enable/disable traffic selector narrowing for IKEv2 initiator.

Choices:

  • enable

  • disable

ipv4_df

string

Enable/disable setting and resetting of IPv4 “Don”t Fragment” bit.

Choices:

  • enable

  • disable

keepalive

string

Enable/disable keep alive.

Choices:

  • enable

  • disable

keylife_type

string

Keylife type.

Choices:

  • seconds

  • kbs

  • both

keylifekbs

integer

Phase2 key life in number of bytes of traffic (5120 - 4294967295).

keylifeseconds

integer

Phase2 key life in time in seconds (120 - 172800).

l2tp

string

Enable/disable L2TP over IPsec.

Choices:

  • enable

  • disable

name

string / required

IPsec tunnel name.

pfs

string

Enable/disable PFS feature.

Choices:

  • enable

  • disable

phase1name

string

Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1-interface.name.

proposal

list / elements=string

Phase2 proposal.

Choices:

  • null-md5

  • null-sha1

  • null-sha256

  • null-sha384

  • null-sha512

  • des-null

  • des-md5

  • des-sha1

  • des-sha256

  • des-sha384

  • des-sha512

  • 3des-null

  • 3des-md5

  • 3des-sha1

  • 3des-sha256

  • 3des-sha384

  • 3des-sha512

  • aes128-null

  • aes128-md5

  • aes128-sha1

  • aes128-sha256

  • aes128-sha384

  • aes128-sha512

  • aes128gcm

  • aes192-null

  • aes192-md5

  • aes192-sha1

  • aes192-sha256

  • aes192-sha384

  • aes192-sha512

  • aes256-null

  • aes256-md5

  • aes256-sha1

  • aes256-sha256

  • aes256-sha384

  • aes256-sha512

  • aes256gcm

  • chacha20poly1305

  • aria128-null

  • aria128-md5

  • aria128-sha1

  • aria128-sha256

  • aria128-sha384

  • aria128-sha512

  • aria192-null

  • aria192-md5

  • aria192-sha1

  • aria192-sha256

  • aria192-sha384

  • aria192-sha512

  • aria256-null

  • aria256-md5

  • aria256-sha1

  • aria256-sha256

  • aria256-sha384

  • aria256-sha512

  • seed-null

  • seed-md5

  • seed-sha1

  • seed-sha256

  • seed-sha384

  • seed-sha512

protocol

integer

Quick mode protocol selector (1 - 255 or 0 for all).

replay

string

Enable/disable replay detection.

Choices:

  • enable

  • disable

route_overlap

string

Action for overlapping routes.

Choices:

  • use-old

  • use-new

  • allow

single_source

string

Enable/disable single source IP restriction.

Choices:

  • enable

  • disable

src_addr_type

string

Local proxy ID type.

Choices:

  • subnet

  • range

  • ip

  • name

  • subnet6

  • range6

  • ip6

  • name6

src_end_ip

string

Local proxy ID end.

src_end_ip6

string

Local proxy ID IPv6 end.

src_name

string

Local proxy ID name. Source firewall.address.name firewall.addrgrp.name.

src_name6

string

Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.

src_port

integer

Quick mode source port (1 - 65535 or 0 for all).

src_start_ip

string

Local proxy ID start.

src_start_ip6

string

Local proxy ID IPv6 start.

src_subnet

string

Local proxy ID subnet.

src_subnet6

string

Local proxy ID IPv6 subnet.

Notes

Note

  • Legacy fortiosapi has been deprecated, httpapi is the preferred way to run playbooks

Examples

- collections:
  - fortinet.fortios
  connection: httpapi
  hosts: fortigate01
  vars:
    ansible_httpapi_port: 443
    ansible_httpapi_use_ssl: true
    ansible_httpapi_validate_certs: false
    vdom: root
  tasks:
  - name: fortios_vpn_ipsec_phase2_interface
    fortios_vpn_ipsec_phase2_interface:
      vdom: root
      state: present
      vpn_ipsec_phase2_interface:
        add_route: phase1
        auto_discovery_forwarder: phase1
        auto_discovery_sender: phase1
        auto_negotiate: disable
        dhcp_ipsec: disable
        dhgrp: 14 5
        dst_addr_type: subnet
        dst_end_ip6: '::'
        dst_port: 0
        dst_subnet: 0.0.0.0 0.0.0.0
        encapsulation: tunnel-mode
        ipv4_df: disable
        keepalive: disable
        keylife_type: seconds
        keylifekbs: 5120
        keylifeseconds: 43200
        l2tp: disable
        name: abscp1
        pfs: enable
        phase1name: t0
        proposal: aes128-sha1
        protocol: 0
        replay: enable
        route_overlap: use-new
        single_source: disable
        src_addr_type: subnet
        src_end_ip6: '::'
        src_port: 0
        src_subnet: 0.0.0.0 0.0.0.0

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

build

string

Build number of the fortigate image

Returned: always

Sample: “1547”

http_method

string

Last method used to provision the content into FortiGate

Returned: always

Sample: “PUT”

http_status

string

Last result given by FortiGate on last operation applied

Returned: always

Sample: “200”

mkey

string

Master key (id) used in the last call to FortiGate

Returned: success

Sample: “id”

name

string

Name of the table used to fulfill the request

Returned: always

Sample: “urlfilter”

path

string

Path of the table used to fulfill the request

Returned: always

Sample: “webfilter”

revision

string

Internal revision number

Returned: always

Sample: “17.0.2.10658”

serial

string

Serial number of the unit

Returned: always

Sample: “FGVMEVYYQT3AB5352”

status

string

Indication of the operation’s result

Returned: always

Sample: “success”

vdom

string

Virtual domain used

Returned: always

Sample: “root”

version

string

Version of the FortiGate

Returned: always

Sample: “v5.6.3”

Authors

  • Link Zheng (@chillancezen)

  • Jie Xue (@JieX19)

  • Hongbin Lu (@fgtdev-hblu)

  • Frank Shen (@frankshen01)

  • Miguel Angel Munoz (@mamunozgonzalez)

  • Nicolas Thomas (@thomnico)