fortinet.fortios.fortios_wireless_controller_timers – Configure CAPWAP timers in Fortinet’s FortiOS and FortiGate.
Note
This plugin is part of the fortinet.fortios collection (version 2.1.3).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install fortinet.fortios
.
To use it in a playbook, specify: fortinet.fortios.fortios_wireless_controller_timers
.
New in version 2.10: of fortinet.fortios
Synopsis
This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify wireless_controller feature and timers category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.0
Requirements
The below requirements are needed on the host that executes this module.
ansible>=2.9.0
Parameters
Parameter |
Comments |
---|---|
Token-based authentication. Generated from GUI of Fortigate. |
|
Enable/Disable logging for task. Choices:
|
|
Member attribute path to operate on. Delimited by a slash character if there are more than one attribute. Parameter marked with member_path is legitimate for doing member operation. |
|
Add or delete a member under specified attribute path. When member_state is specified, the state option is ignored. Choices:
|
|
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit. Default: “root” |
|
Configure CAPWAP timers. |
|
Time between running Bluetooth Low Energy (BLE) reports (10 - 3600 sec). |
|
Time after which a client is considered idle and times out (20 - 3600 sec). |
|
Weekday on which to run DARRP optimization. Choices:
|
|
Time for running Dynamic Automatic Radio Resource Provisioning (DARRP) optimizations (0 - 86400 sec). |
|
Time at which DARRP optimizations run (you can add up to 8 times). |
|
Time. |
|
Time between discovery requests (2 - 180 sec). |
|
Dynamic radio mode assignment (DRMA) schedule interval in minutes (10 - 1440). |
|
Time between echo requests sent by the managed WTP, AP, or FortiAP (1 - 255 sec). |
|
Time between recording logs about fake APs if periodic fake AP logging is configured (0 - 1440 min). |
|
Time period to keep IPsec VPN interfaces up after WTP sessions are disconnected (30 - 3600 sec). |
|
Time between running radio reports (1 - 255 sec). |
|
Time between logging rogue AP messages if periodic rogue AP logging is configured (0 - 1440 min). |
|
Time between running station capability reports (1 - 255 sec). |
|
Time between running client presence flushes to remove clients that are listed but no longer present (0 - 86400 sec). |
|
Time between running client (station) reports (1 - 255 sec). |
|
Time between running Virtual Access Point (VAP) reports (1 - 255 sec). |
Examples
- collections:
- fortinet.fortios
connection: httpapi
hosts: fortigate01
vars:
ansible_httpapi_port: 443
ansible_httpapi_use_ssl: true
ansible_httpapi_validate_certs: false
vdom: root
tasks:
- name: fortios_wireless_controller_timers
fortios_wireless_controller_timers:
vdom: root
wireless_controller_timers:
ble_scan_report_intv: 30
client_idle_timeout: 300
darrp_optimize: 0
discovery_interval: 5
drma_interval: 60
echo_interval: 30
fake_ap_log: 1
ipsec_intf_cleanup: 120
radio_stats_interval: 15
rogue_ap_log: 0
sta_capability_interval: 30
sta_locate_timer: 1800
sta_stats_interval: 1
vap_stats_interval: 15
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Build number of the fortigate image Returned: always Sample: “1547” |
|
Last method used to provision the content into FortiGate Returned: always Sample: “PUT” |
|
Last result given by FortiGate on last operation applied Returned: always Sample: “200” |
|
Master key (id) used in the last call to FortiGate Returned: success Sample: “id” |
|
Name of the table used to fulfill the request Returned: always Sample: “urlfilter” |
|
Path of the table used to fulfill the request Returned: always Sample: “webfilter” |
|
Internal revision number Returned: always Sample: “17.0.2.10658” |
|
Serial number of the unit Returned: always Sample: “FGVMEVYYQT3AB5352” |
|
Indication of the operation’s result Returned: always Sample: “success” |
|
Virtual domain used Returned: always Sample: “root” |
|
Version of the FortiGate Returned: always Sample: “v5.6.3” |
Authors
Link Zheng (@chillancezen)
Jie Xue (@JieX19)
Hongbin Lu (@fgtdev-hblu)
Frank Shen (@frankshen01)
Miguel Angel Munoz (@mamunozgonzalez)
Nicolas Thomas (@thomnico)