junipernetworks.junos.junos_l3_interface – (deprecated, removed after 2022-06-01) Manage L3 interfaces on Juniper JUNOS network devices
Note
This plugin is part of the junipernetworks.junos collection (version 2.8.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install junipernetworks.junos
.
To use it in a playbook, specify: junipernetworks.junos.junos_l3_interface
.
New in version 1.0.0: of junipernetworks.junos
DEPRECATED
- Removed in
major release after 2022-06-01
- Why
Updated modules released with more functionality
- Alternative
Use junipernetworks.junos.junos_l3_interfaces instead.
Synopsis
This module provides declarative management of L3 interfaces on Juniper JUNOS network devices.
Note
This module has a corresponding action plugin.
Requirements
The below requirements are needed on the host that executes this module.
ncclient (>=v0.5.2)
Parameters
Parameter |
Comments |
---|---|
Specifies whether or not the configuration is active or deactivated Choices:
|
|
List of L3 interfaces definitions |
|
Specifies whether or not the configuration is active or deactivated Choices:
|
|
The name of input filter for ipv6. |
|
The name of output filter for ipv6. |
|
The name of input filter. |
|
The name of output filter. |
|
IPv4 of the L3 interface. |
|
IPv6 of the L3 interface. |
|
Name of the L3 interface. |
|
State of the L3 interface configuration. Choices:
|
|
Logical interface number. Default: 0 |
|
The name of input filter for ipv6. |
|
The name of output filter for ipv6. |
|
The name of input filter. |
|
The name of output filter. |
|
IPv4 of the L3 interface. |
|
IPv6 of the L3 interface. |
|
Name of the L3 interface. |
|
Deprecated Starting with Ansible 2.5 we recommend using For more information please see the Junos OS Platform Options guide. A dict object containing connection details. |
|
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport. |
|
Specifies the password to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
Specifies the port to use when building the connection to the remote device. The port value will default to the well known SSH port of 22 (for |
|
Specifies the SSH key to use to authenticate the connection to the remote device. This value is the path to the key used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. |
|
Configures the transport connection to use when connecting to the remote device. Choices:
|
|
Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate the SSH session. If the value is not specified in the task, the value of environment variable |
|
State of the L3 interface configuration. Choices:
|
|
Logical interface number. Default: 0 |
Notes
Note
This module requires the netconf system service be enabled on the remote device being managed.
Tested against vSRX JUNOS version 15.1X49-D15.4, vqfx-10000 JUNOS Version 15.1X53-D60.4.
Recommended connection is
netconf
. See the Junos OS Platform Options.This module also works with
local
connections for legacy playbooks.For information on using CLI and netconf see the Junos OS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Juniper network devices see https://www.ansible.com/ansible-juniper.
Examples
- name: Set ge-0/0/1 IPv4 address
junipernetworks.junos.junos_l3_interface:
name: ge-0/0/1
ipv4: 192.168.0.1
- name: Remove ge-0/0/1 IPv4 address
junipernetworks.junos.junos_l3_interface:
name: ge-0/0/1
state: absent
- name: Set ipv4 address using aggregate
junipernetworks.junos.junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 192.0.2.2
ipv6: fd5d:12c9:2201:2::2
- name: Delete ipv4 address using aggregate
junipernetworks.junos.junos_l3_interface:
aggregate:
- name: ge-0/0/1
ipv4: 192.0.2.1
- name: ge-0/0/2
ipv4: 192.0.2.2
state: absent
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
Configuration difference before and after applying change. Returned: when configuration is changed and diff option is enabled. Sample: “[edit interfaces ge-0/0/1 unit 0 family inet] + address 192.0.2.1/32; [edit interfaces ge-0/0/1 unit 0 family inet6] + address fd5d:12c9:2201:1::1/128;\n” |
Status
This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.
Authors
Ganesh Nalawade (@ganeshrn)