netapp.ontap.na_ontap_volume_autosize – NetApp ONTAP manage volume autosize

Note

This plugin is part of the netapp.ontap collection (version 21.14.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install netapp.ontap.

To use it in a playbook, specify: netapp.ontap.na_ontap_volume_autosize.

New in version 2.9.0: of netapp.ontap

Synopsis

  • Modify Volume AutoSize

Requirements

The below requirements are needed on the host that executes this module.

  • Ansible 2.9

  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’

  • netapp-lib 2020.3.12 is strongly recommended as it provides better error reporting for connection issues.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward.

  • REST support requires ONTAP 9.6 or later.

  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter

Comments

cert_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client cert file (.pem).

not supported with python 2.6.

feature_flags

dictionary

added in 20.5.0 of netapp.ontap

Enable or disable a new feature.

This can be used to enable an experimental feature or disable a new feature that breaks backward compatibility.

Supported keys and values are subject to change without notice. Unknown keys are ignored.

grow_threshold_percent

integer

Specifies the percentage of the flexible volume’s capacity at which autogrow is initiated.

The default grow threshold varies from 85% to 98%, depending on the volume size.

It is an error for the grow threshold to be less than or equal to the shrink threshold.

Range between 0 and 100

hostname

string / required

The hostname or IP address of the ONTAP instance.

http_port

integer

Override the default port (80 or 443) with this port

https

boolean

Enable and disable https.

Ignored when using REST as only https is supported.

Ignored when using SSL certificate authentication as it requires SSL.

Choices:

  • no ← (default)

  • yes

increment_size

string

Specify the flexible volume’s increment size using the following format < number > [k|m|g|t]

The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

key_filepath

string

added in 20.6.0 of netapp.ontap

path to SSL client key file.

maximum_size

string

Specify the flexible volume’s maximum allowed size using the following format < number > [k|m|g|t]

The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

The default value is 20% greater than the volume size at the time autosize was enabled.

It is an error for the maximum volume size to be less than the current volume size.

It is also an error for the maximum size to be less than or equal to the minimum size.

minimum_size

string

Specify the flexible volume’s minimum allowed size using the following format < number > [k|m|g|t] The amount is the absolute size to set.

The trailing ‘k’, ‘m’, ‘g’, and ‘t’ indicates the desired units, namely ‘kilobytes’, ‘megabytes’, ‘gigabytes’, and ‘terabytes’ (respectively).

The default value is the size of the volume at the time the ‘grow_shrink’ mode was enabled.

It is an error for the minimum size to be greater than or equal to the maximum size.

mode

string

Specify the flexible volume’s autosize mode of operation.

Choices:

  • grow

  • grow_shrink

  • off

ontapi

integer

The ontap api version to use

password

aliases: pass

string

Password for the specified user.

reset

boolean

Sets the values of maximum_size, increment_size, minimum_size, grow_threshold_percent, shrink_threshold_percent and mode to their defaults

If reset paramater is present system will always perform reset action, so idempotency is not supported.

Choices:

  • no

  • yes

shrink_threshold_percent

integer

Specifies the percentage of the flexible volume’s capacity at which autoshrink is initiated.

The default shrink theshold is 50%. It is an error for the shrink threshold to be greater than or equal to the grow threshold.

Range between 0 and 100

use_rest

string

REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.

always – will always use the REST API

never – will always use the ZAPI

auto – will try to use the REST Api

Default: “auto”

username

aliases: user

string

This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required.

For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

Two authentication methods are supported

  1. basic authentication, using username and password,

  2. SSL certificate authentication, using a ssl client cert file, and optionally a private key file.

To use a certificate, the certificate must have been installed in the ONTAP cluster, and cert authentication must have been enabled.

validate_certs

boolean

If set to no, the SSL certificates will not be validated.

This should only set to False used on personally controlled sites using self-signed certificates.

Choices:

  • no

  • yes ← (default)

volume

string / required

The name of the flexible volume for which we want to set autosize.

vserver

string / required

Name of the vserver to use.

Notes

Note

  • The modules prefixed with na_ontap are built to support the ONTAP storage platform.

Examples

- name: Modify volume autosize
  na_ontap_volume_autosize:
    hostname: 10.193.79.189
    username: admin
    password: netapp1!
    volume: ansibleVolumesize12
    mode: grow
    grow_threshold_percent: 99
    increment_size: 50m
    maximum_size: 10g
    minimum_size: 21m
    shrink_threshold_percent: 40
    vserver: ansible_vserver

- name: Reset volume autosize
  na_ontap_volume_autosize:
    hostname: 10.193.79.189
    username: admin
    password: netapp1!
    volume: ansibleVolumesize12
    reset: true
    vserver: ansible_vserver

Authors