vyos.vyos.vyos_lag_interfaces – LAG interfaces resource module

Note

This plugin is part of the vyos.vyos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_lag_interfaces.

New in version 1.0.0: of vyos.vyos

Synopsis

  • This module manages attributes of link aggregation groups on VyOS network devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of link aggregation group configurations.

arp_monitor

dictionary

ARP Link monitoring parameters.

interval

integer

ARP link monitoring frequency in milliseconds.

target

list / elements=string

IP address to use for ARP monitoring.

hash_policy

string

LAG or bonding transmit hash policy.

Choices:

  • layer2

  • layer2+3

  • layer3+4

members

list / elements=dictionary

List of member interfaces for the LAG (bond).

member

string

Name of the member interface.

mode

string

LAG or bond mode.

Choices:

  • 802.3ad

  • active-backup

  • broadcast

  • round-robin

  • transmit-load-balance

  • adaptive-load-balance

  • xor-hash

name

string / required

Name of the link aggregation group (LAG) or bond.

primary

string

Primary device interfaces for the LAG (bond).

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the VyOS device by executing the command show configuration commands | grep bond.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion.

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • parsed

  • gathered

  • rendered

Notes

Note

Examples

# Using merged
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3
#
- name: Merge provided configuration with device configuration
  vyos.vyos.vyos_lag_interfaces:
    config:
    - name: bond2
      mode: active-backup
      members:
      - member: eth2
      - member: eth1
      hash_policy: layer2
      primary: eth2

    - name: bond3
      mode: active-backup
      hash_policy: layer2+3
      members:
      - member: eth3
      primary: eth3
    state: merged
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# "commands": [
#        "set interfaces bonding bond2 hash-policy 'layer2'",
#        "set interfaces bonding bond2 mode 'active-backup'",
#        "set interfaces ethernet eth2 bond-group bond2",
#        "set interfaces ethernet eth1 bond-group bond2",
#        "set interfaces bonding bond2 primary 'eth2'",
#        "set interfaces bonding bond3 hash-policy 'layer2+3'",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth3 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ]
#
#     "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ]
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using replaced
#
# Before state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Replace device configurations of listed LAGs with provided configurations
  vyos.vyos.vyos_lag_interfaces:
    config:
    - name: bond3
      mode: 802.3ad
      hash_policy: layer2
      members:
      - member: eth3
    state: replaced
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
# "commands": [
#        "delete interfaces bonding bond3 primary",
#        "set interfaces bonding bond3 hash-policy 'layer2'",
#        "set interfaces bonding bond3 mode '802.3ad'"
#    ],
#
# "after": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
# After state:
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using overridden
#
# Before state
# --------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode '802.3ad'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Overrides all device configuration with provided configuration
  vyos.vyos.vyos_lag_interfaces:
    config:
    - name: bond3
      mode: active-backup
      members:
      - member: eth1
      - member: eth2
      - member: eth3
      primary: eth3
      hash_policy: layer2
    state: overridden
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "802.3ad",
#            "name": "bond3"
#        }
#    ],
#
#    "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "set interfaces bonding bond3 mode 'active-backup'",
#        "set interfaces ethernet eth1 bond-group bond3",
#        "set interfaces ethernet eth2 bond-group bond3",
#        "set interfaces bonding bond3 primary 'eth3'"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                },
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
#
#
# After state
# ------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3 hash-policy 'layer2'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond3'
# set interfaces ethernet eth2 bond-group 'bond3'
# set interfaces ethernet eth3 bond-group 'bond3'


# Using deleted
#
# Before state
# -------------
#
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2 hash-policy 'layer2'
# set interfaces bonding bond2 mode 'active-backup'
# set interfaces bonding bond2 primary 'eth2'
# set interfaces bonding bond3 hash-policy 'layer2+3'
# set interfaces bonding bond3 mode 'active-backup'
# set interfaces bonding bond3 primary 'eth3'
# set interfaces ethernet eth1 bond-group 'bond2'
# set interfaces ethernet eth2 bond-group 'bond2'
# set interfaces ethernet eth3 bond-group 'bond3'
#
- name: Delete LAG attributes of given interfaces (Note This won't delete the interface
    itself)
  vyos.vyos.vyos_lag_interfaces:
    config:
    - name: bond2
    - name: bond3
    state: deleted
#
#
# ------------------------
# Module Execution Results
# ------------------------
#
# "before": [
#        {
#            "hash_policy": "layer2",
#            "members": [
#                {
#                    "member": "eth1"
#                },
#                {
#                    "member": "eth2"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond2",
#            "primary": "eth2"
#        },
#        {
#            "hash_policy": "layer2+3",
#            "members": [
#                {
#                    "member": "eth3"
#                }
#            ],
#            "mode": "active-backup",
#            "name": "bond3",
#            "primary": "eth3"
#        }
#    ],
# "commands": [
#        "delete interfaces bonding bond2 hash-policy",
#        "delete interfaces ethernet eth1 bond-group bond2",
#        "delete interfaces ethernet eth2 bond-group bond2",
#        "delete interfaces bonding bond2 mode",
#        "delete interfaces bonding bond2 primary",
#        "delete interfaces bonding bond3 hash-policy",
#        "delete interfaces ethernet eth3 bond-group bond3",
#        "delete interfaces bonding bond3 mode",
#        "delete interfaces bonding bond3 primary"
#    ],
#
# "after": [
#        {
#            "name": "bond2"
#        },
#        {
#            "name": "bond3"
#        }
#    ],
#
# After state
# ------------
# vyos@vyos:~$ show configuration  commands | grep bond
# set interfaces bonding bond2
# set interfaces bonding bond3


# Using gathered
#
# Before state:
# -------------
#
# vyos@192# run show configuration commands | grep bond
# set interfaces bonding bond0 hash-policy 'layer2'
# set interfaces bonding bond0 mode 'active-backup'
# set interfaces bonding bond0 primary 'eth1'
# set interfaces bonding bond1 hash-policy 'layer2+3'
# set interfaces bonding bond1 mode 'active-backup'
# set interfaces bonding bond1 primary 'eth2'
# set interfaces ethernet eth1 bond-group 'bond0'
# set interfaces ethernet eth2 bond-group 'bond1'
#
- name: Gather listed  lag interfaces with provided configurations
  vyos.vyos.vyos_lag_interfaces:
    config:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#        {
#            "afi": "ipv6",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "This is ipv6 specific rule-set",
#                    "name": "UPLINK",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 1 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 1
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Fwipv6-Rule 2 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 2
#                        }
#                    ]
#                }
#            ]
#        },
#        {
#            "afi": "ipv4",
#            "rule_sets": [
#                {
#                    "default_action": "accept",
#                    "description": "IPv4 INBOUND rule set",
#                    "name": "INBOUND",
#                    "rules": [
#                        {
#                            "action": "accept",
#                            "description": "Rule 101 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 101
#                        },
#                        {
#                            "action": "reject",
#                            "description": "Rule 102 is configured by Ansible",
#                            "ipsec": "match-ipsec",
#                            "number": 102
#                        },
#                        {
#                            "action": "accept",
#                            "description": "Rule 103 is configured by Ansible",
#                            "destination": {
#                                "group": {
#                                    "address_group": "inbound"
#                                }
#                            },
#                            "number": 103,
#                            "source": {
#                                "address": "192.0.2.0"
#                            },
#                            "state": {
#                                "established": true,
#                                "invalid": false,
#                                "new": false,
#                                "related": true
#                            }
#                        }
#                    ]
#                }
#            ]
#        }
#    ]
#
#
# After state:
# -------------
#
# vyos@192# run show configuration commands | grep bond
# set interfaces bonding bond0 hash-policy 'layer2'
# set interfaces bonding bond0 mode 'active-backup'
# set interfaces bonding bond0 primary 'eth1'
# set interfaces bonding bond1 hash-policy 'layer2+3'
# set interfaces bonding bond1 mode 'active-backup'
# set interfaces bonding bond1 primary 'eth2'
# set interfaces ethernet eth1 bond-group 'bond0'
# set interfaces ethernet eth2 bond-group 'bond1'


# Using rendered
#
#
- name: Render the commands for provided  configuration
  vyos.vyos.vyos_lag_interfaces:
    config:
    - name: bond0
      hash_policy: layer2
      members:
      - member: eth1
      mode: active-backup
      primary: eth1
    - name: bond1
      hash_policy: layer2+3
      members:
      - member: eth2
      mode: active-backup
      primary: eth2
    state: rendered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "set interfaces bonding bond0 hash-policy 'layer2'",
#        "set interfaces ethernet eth1 bond-group 'bond0'",
#        "set interfaces bonding bond0 mode 'active-backup'",
#        "set interfaces bonding bond0 primary 'eth1'",
#        "set interfaces bonding bond1 hash-policy 'layer2+3'",
#        "set interfaces ethernet eth2 bond-group 'bond1'",
#        "set interfaces bonding bond1 mode 'active-backup'",
#        "set interfaces bonding bond1 primary 'eth2'"
#    ]


# Using parsed
#
#
- name: Parsed the commands for provided  configuration
  vyos.vyos.vyos_l3_interfaces:
    running_config:
      "set interfaces bonding bond0 hash-policy 'layer2'
       set interfaces bonding bond0 mode 'active-backup'
       set interfaces bonding bond0 primary 'eth1'
       set interfaces bonding bond1 hash-policy 'layer2+3'
       set interfaces bonding bond1 mode 'active-backup'
       set interfaces bonding bond1 primary 'eth2'
       set interfaces ethernet eth1 bond-group 'bond0'
       set interfaces ethernet eth2 bond-group 'bond1'"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#         {
#             "hash_policy": "layer2",
#             "members": [
#                 {
#                     "member": "eth1"
#                 }
#             ],
#             "mode": "active-backup",
#             "name": "bond0",
#             "primary": "eth1"
#         },
#         {
#             "hash_policy": "layer2+3",
#             "members": [
#                 {
#                     "member": "eth2"
#                 }
#             ],
#             "mode": "active-backup",
#             "name": "bond1",
#             "primary": "eth2"
#         }
#     ]

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“set interfaces bonding bond2”, “set interfaces bonding bond2 hash-policy layer2”]

Authors

  • Rohit Thakur (@rohitthakur2590)