vyos.vyos.vyos_route_maps – Route Map Resource Module.

Note

This plugin is part of the vyos.vyos collection (version 2.6.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install vyos.vyos.

To use it in a playbook, specify: vyos.vyos.vyos_route_maps.

New in version 2.3.0: of vyos.vyos

Synopsis

  • This module manages route map configurations on devices running VYOS.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of route-map configuration.

entries

aliases: rules

list / elements=dictionary

Route Map rules.

action

string

Action for matching routes

Choices:

  • deny

  • permit

call

string

Route map name

continue_sequence

integer

Continue on a different entry within the route-map.

description

string

Description for the rule.

match

dictionary

Route parameters to match.

as_path

string

Set as-path.

community

dictionary

BGP community attribute.

community_list

string

BGP community-list to match

exact_match

boolean

BGP community-list to match

Choices:

  • no

  • yes

extcommunity

string

Extended community name.

interface

string

First hop interface of a route to match.

ip

dictionary

IP prefix parameters to match.

address

dictionary

IP address of route to match.

list_type

string

type of list

Choices:

  • access-list

  • prefix-list

value

string

value of access-list and prefix list

next_hop

dictionary

next hop prefix list.

list_type

string

type of list

Choices:

  • access-list

  • prefix-list

value

string

value of access-list and prefix list

route_source

dictionary

IP route-source to match

list_type

string

type of list

Choices:

  • access-list

  • prefix-list

value

string

value of access-list and prefix list

ipv6

dictionary

IPv6 prefix parameters to match.

address

dictionary

IPv6 address of route to match.

list_type

string

type of list

Choices:

  • access-list

  • prefix-list

value

string

value of access-list and prefix list

next_hop

string

next-hop ipv6 address IPv6 <h:h:h:h:h:h:h:h>.

large_community_large_community_list

string

BGP large-community-list to match.

metric

integer

Route metric <1-65535>.

origin

string

bgp origin.

Choices:

  • ebgp

  • ibgp

  • incomplete

peer

string

Peer IP address <x.x.x.x>.

rpki

string

RPKI validation value.

Choices:

  • notfound

  • invalid

  • valid

on_match

dictionary

Exit policy on matches.

goto

integer

Rule number to goto on match <1-65535>.

next

boolean

Next sequence number to goto on match.

Choices:

  • no

  • yes

sequence

integer

Route map rule number <1-65535>.

set

dictionary

Route parameters.

aggregator

dictionary

Border Gateway Protocol (BGP) aggregator attribute.

as

string

AS number of an aggregation.

ip

string

IP address.

as_path_exclude

string

BGP AS path exclude string ex “456 64500 45001”

as_path_prepend

string

Prepend string for a Border Gateway Protocol (BGP) AS-path attribute.

atomic_aggregate

boolean

Border Gateway Protocol (BGP) atomic aggregate attribute.

Choices:

  • no

  • yes

bgp_extcommunity_rt

string

ExtCommunity in format AS:value

comm_list

dictionary

Border Gateway Protocol (BGP) communities matching a community-list.

comm_list

string

BGP communities with a community-list.

delete

boolean

Delete BGP communities matching the community-list.

Choices:

  • no

  • yes

community

dictionary

Border Gateway Protocol (BGP) community attribute.

value

string

Community in 4 octet AS:value format or it can be from local-AS, no-advertise,no-expert,internet,additive,none.

extcommunity_rt

string

Set route target value.ASN:nn_or_IP_address:nn VPN extended community.

extcommunity_soo

string

Set Site of Origin value. ASN:nn_or_IP_address:nn VPN extended community

ip_next_hop

string

IP address.

ipv6_next_hop

dictionary

Nexthop IPv6 address.

ip_type

string

Global or Local

Choices:

  • global

  • local

value

string

ipv6 address

large_community

string

Set BGP large community value.

local_preference

string

Border Gateway Protocol (BGP) local preference attribute.Example <0-4294967295>.

metric

string

Destination routing protocol metric. Example <0-4294967295>.

metric_type

string

Open Shortest Path First (OSPF) external metric-type.

Choices:

  • type-1

  • type-2

origin

string

Set bgp origin.

Choices:

  • egp

  • igp

  • incomplete

originator_id

string

Border Gateway Protocol (BGP) originator ID attribute. Originator IP address.

src

string

Source address for route. Example <x.x.x.x> IP address.

tag

string

Tag value for routing protocol. Example <1-65535>

weight

string

Border Gateway Protocol (BGP) weight attribute. Example <0-4294967295>

route_map

string

Route map name.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the VYOS device by executing the command show configuration commands | grep route-map.

The state parsed reads the configuration from show configuration commands | grep route-map option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

Choices:

  • deleted

  • merged ← (default)

  • overridden

  • replaced

  • gathered

  • rendered

  • parsed

Notes

Note

  • Tested against vyos 1.2.

  • This module works with connection network_cli.

Examples

# Using merged
# Before state

# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# vyos@vyos:~$
    - name: Merge the provided configuration with the existing running configuration
      register: result
      vyos.vyos.vyos_route_maps: &id001
        config:
          - route_map: test1
            entries:
              - sequence: 1
                description: "test"
                action: permit
                continue: 2
                on_match:
                  next: True
          - route_map: test3
            entries:
              - sequence: 1
                action: permit
                match:
                  rpki: invalid
                  metric: 1
                  peer: 192.0.2.32
                set:
                  local_preference: 4
                  metric: 5
                  metric_type: "type-1"
                  origin: egp
                  originator_id: 192.0.2.34
                  tag: 5
                  weight: 4
        state: merged
# After State
# vyos@vyos:~$ show configuration commands |  match "set policy route-maps"
#   set policy route-map test1 rule 1 description test
#   set policy route-map test1 rule 1 action permit
#   set policy route-map test1 rule 1 continue 2
#   set policy route-map test1 rule 1 on-match next
#   set policy route-map test3 rule 1 action permit
#   set policy route-map test3 rule 1 set local-preference 4
#   set policy route-map test3 rule 1 set metric 5
#   set policy route-map test3 rule 1 set metric-type type-1
#   set policy route-map test3 rule 1 set origin egp
#   set policy route-map test3 rule 1 set originator-id 192.0.2.34
#   set policy route-map test3 rule 1 set tag 5
#   set policy route-map test3 rule 1 set weight 4
#   set policy route-map test3 rule 1 match metric 1
#   set policy route-map test3 rule 1 match peer 192.0.2.32
#   set policy route-map test3 rule 1 match rpki invalid

# "after": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "continue_sequence": 2,
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 }
#             ],
#             "route_map": "test1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 1,
#                         "peer": "192.0.2.32",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "4",
#                         "metric": "5",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "5",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "before": [],
#     "changed": true,
#     "commands": [
#         "set policy route-map test1 rule 1 description test",
#         "set policy route-map test1 rule 1 action permit",
#         "set policy route-map test1 rule 1 continue 2",
#         "set policy route-map test1 rule 1 on-match next",
#         "set policy route-map test3 rule 1 action permit",
#         "set policy route-map test3 rule 1 set local-preference 4",
#         "set policy route-map test3 rule 1 set metric 5",
#         "set policy route-map test3 rule 1 set metric-type type-1",
#         "set policy route-map test3 rule 1 set origin egp",
#         "set policy route-map test3 rule 1 set originator-id 192.0.2.34",
#         "set policy route-map test3 rule 1 set tag 5",
#         "set policy route-map test3 rule 1 set weight 4",
#         "set policy route-map test3 rule 1 match metric 1",
#         "set policy route-map test3 rule 1 match peer 192.0.2.32",
#         "set policy route-map test3 rule 1 match rpki invalid"
#     ],

# Using replaced:
# --------------

# Before state:
# vyos@vyos:~$ show configuration commands |  match "set route-map policy"
# set policy route-map test2 rule 1 action 'permit'
# set policy route-map test2 rule 1 description 'test'
# set policy route-map test2 rule 1 on-match next
# set policy route-map test2 rule 2 action 'permit'
# set policy route-map test2 rule 2 on-match goto '4'
# set policy route-map test3 rule 1 action 'permit'
# set policy route-map test3 rule 1 match metric '1'
# set policy route-map test3 rule 1 match peer '192.0.2.32'
# set policy route-map test3 rule 1 match rpki 'invalid'
# set policy route-map test3 rule 1 set community 'internet'
# set policy route-map test3 rule 1 set ip-next-hop '192.0.2.33'
# set policy route-map test3 rule 1 set local-preference '4'
# set policy route-map test3 rule 1 set metric '5'
# set policy route-map test3 rule 1 set metric-type 'type-1'
# set policy route-map test3 rule 1 set origin 'egp'
# set policy route-map test3 rule 1 set originator-id '192.0.2.34'
# set policy route-map test3 rule 1 set tag '5'
# set policy route-map test3 rule 1 set weight '4'
#
#     - name: Replace  the provided configuration with the existing running configuration
#       register: result
#       vyos.vyos.vyos_route_maps: &id001
#         config:
#           - route_map: test3
#             entries:
#               - sequence: 1
#                 action: permit
#                 match:
#                   rpki: invalid
#                   metric: 3
#                   peer: 192.0.2.35
#                 set:
#                   local_preference: 6
#                   metric: 4
#                   metric_type: "type-1"
#                   origin: egp
#                   originator_id: 192.0.2.34
#                   tag: 4
#                   weight: 4
#         state: replaced
# After state:

# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# set policy route-map test3 rule 1 set local-preference 6
# set policy route-map test3 rule 1 set metric 4
# set policy route-map test3 rule 1 set tag 4
# set policy route-map test3 rule 1 match metric 3
# set policy route-map test3 rule 1 match peer 192.0.2.35
# vyos@vyos:~$
#
#
# Module Execution:
#
# "after": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 },
#                 {
#                     "action": "permit",
#                     "on_match": {
#                         "goto": 4
#                     },
#                     "sequence": 2
#                 }
#             ],
#             "route_map": "test2"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 3,
#                         "peer": "192.0.2.35",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "6",
#                         "metric": "4",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "4",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "before": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 },
#                 {
#                     "action": "permit",
#                     "on_match": {
#                         "goto": 4
#                     },
#                     "sequence": 2
#                 }
#             ],
#             "route_map": "test2"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 1,
#                         "peer": "192.0.2.32",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "community": {
#                             "value": "internet"
#                         },
#                         "ip_next_hop": "192.0.2.33",
#                         "local_preference": "4",
#                         "metric": "5",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "5",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete policy route-map test3 rule 1 set ip-next-hop 192.0.2.33",
#         "set policy route-map test3 rule 1 set local-preference 6",
#         "set policy route-map test3 rule 1 set metric 4",
#         "set policy route-map test3 rule 1 set tag 4",
#         "delete policy route-map test3 rule 1 set community internet",
#         "set policy route-map test3 rule 1 match metric 3",
#         "set policy route-map test3 rule 1 match peer 192.0.2.35"
#     ],
#
# Using deleted:
# -------------

# Before state:
# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# set policy route-map test3 rule 1 set local-preference 6
# set policy route-map test3 rule 1 set metric 4
# set policy route-map test3 rule 1 set tag 4
# set policy route-map test3 rule 1 match metric 3
# set policy route-map test3 rule 1 match peer 192.0.2.35
# vyos@vyos:~$
#
# - name: Delete the provided configuration
#   register: result
#   vyos.vyos.vyos_route_maps:
#     config:
#     state: deleted
# After state:

# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# vyos@vyos:~$
#
#
# Module Execution:
#
# "after": [],
#     "before": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 3,
#                         "peer": "192.0.2.35",
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "6",
#                         "metric": "4",
#                         "tag": "4",
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete policy route-map test3"
#     ],
#
# using gathered:
# --------------
#
# Before state:
# vyos@vyos:~$ show configuration commands |  match "set policy route-maps"
#   set policy route-map test1 rule 1 description test
#   set policy route-map test1 rule 1 action permit
#   set policy route-map test1 rule 1 continue 2
#   set policy route-map test1 rule 1 on-match next
#   set policy route-map test3 rule 1 action permit
#   set policy route-map test3 rule 1 set local-preference 4
#   set policy route-map test3 rule 1 set metric 5
#   set policy route-map test3 rule 1 set metric-type type-1
#   set policy route-map test3 rule 1 set origin egp
#   set policy route-map test3 rule 1 set originator-id 192.0.2.34
#   set policy route-map test3 rule 1 set tag 5
#   set policy route-map test3 rule 1 set weight 4
#   set policy route-map test3 rule 1 match metric 1
#   set policy route-map test3 rule 1 match peer 192.0.2.32
#   set policy route-map test3 rule 1 match rpki invalid
#
# - name: gather configs
#     vyos.vyos.vyos_route_maps:
#       state: gathered

# "gathered": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "continue_sequence": 2,
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 }
#             ],
#             "route_map": "test1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 1,
#                         "peer": "192.0.2.32",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "4",
#                         "metric": "5",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "5",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ]

# Using parsed:
# ------------

# parsed.cfg
# set policy route-map test1 rule 1 description test
# set policy route-map test1 rule 1 action permit
# set policy route-map test1 rule 1 continue 2
# set policy route-map test1 rule 1 on-match next
# set policy route-map test3 rule 1 action permit
# set policy route-map test3 rule 1 set local-preference 4
# set policy route-map test3 rule 1 set metric 5
# set policy route-map test3 rule 1 set metric-type type-1
# set policy route-map test3 rule 1 set origin egp
# set policy route-map test3 rule 1 set originator-id 192.0.2.34
# set policy route-map test3 rule 1 set tag 5
# set policy route-map test3 rule 1 set weight 4
# set policy route-map test3 rule 1 match metric 1
# set policy route-map test3 rule 1 match peer 192.0.2.32
# set policy route-map test3 rule 1 match rpki invalid
#
# - name: parse configs
#   vyos.vyos.vyos_route_maps:
#     running_config: "{{ lookup('file', './parsed.cfg') }}"
#     state: parsed
#   tags:
#     - parsed
#
# Module execution:
# "parsed": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "continue_sequence": 2,
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 }
#             ],
#             "route_map": "test1"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 1,
#                         "peer": "192.0.2.32",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "4",
#                         "metric": "5",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "5",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ]
#
#
# Using rendered:
# --------------
# - name: Structure provided configuration into device specific commands
#       register: result
#       vyos.vyos.vyos_route_maps: &id001
#         config:
#           - route_map: test1
#             entries:
#               - sequence: 1
#                 description: "test"
#                 action: permit
#                 continue_sequence: 2
#                 on_match:
#                   next: True
#           - route_map: test3
#             entries:
#               - sequence: 1
#                 action: permit
#                 match:
#                   rpki: invalid
#                   metric: 1
#                   peer: 192.0.2.32
#                 set:
#                   local_preference: 4
#                   metric: 5
#                   metric_type: "type-1"
#                   origin: egp
#                   originator_id: 192.0.2.34
#                   tag: 5
#                   weight: 4
#         state: rendered
# Module Execution:
# "rendered": [
#         "set policy route-map test1 rule 1 description test",
#         "set policy route-map test1 rule 1 action permit",
#         "set policy route-map test1 rule 1 continue 2",
#         "set policy route-map test1 rule 1 on-match next",
#         "set policy route-map test3 rule 1 action permit",
#         "set policy route-map test3 rule 1 set local-preference 4",
#         "set policy route-map test3 rule 1 set metric 5",
#         "set policy route-map test3 rule 1 set metric-type type-1",
#         "set policy route-map test3 rule 1 set origin egp",
#         "set policy route-map test3 rule 1 set originator-id 192.0.2.34",
#         "set policy route-map test3 rule 1 set tag 5",
#         "set policy route-map test3 rule 1 set weight 4",
#         "set policy route-map test3 rule 1 match metric 1",
#         "set policy route-map test3 rule 1 match peer 192.0.2.32",
#         "set policy route-map test3 rule 1 match rpki invalid"
#     ]
#
#
# Using overridden:
# --------------
# Before state:
# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# set policy route-map test2 rule 1 action 'permit'
# set policy route-map test2 rule 1 description 'test'
# set policy route-map test2 rule 1 on-match next
# set policy route-map test2 rule 2 action 'permit'
# set policy route-map test2 rule 2 on-match goto '4'
# set policy route-map test3 rule 1 action 'permit'
# set policy route-map test3 rule 1 match metric '1'
# set policy route-map test3 rule 1 match peer '192.0.2.32'
# set policy route-map test3 rule 1 match rpki 'invalid'
# set policy route-map test3 rule 1 set community 'internet'
# set policy route-map test3 rule 1 set ip-next-hop '192.0.2.33'
# set policy route-map test3 rule 1 set local-preference '4'
# set policy route-map test3 rule 1 set metric '5'
# set policy route-map test3 rule 1 set metric-type 'type-1'
# set policy route-map test3 rule 1 set origin 'egp'
# set policy route-map test3 rule 1 set originator-id '192.0.2.34'
# set policy route-map test3 rule 1 set tag '5'
# set policy route-map test3 rule 1 set weight '4'
#
#     - name: Override the existing configuration with the provided running configuration
#       register: result
#       vyos.vyos.vyos_route_maps: &id001
#         config:
#           - route_map: test3
#             entries:
#               - sequence: 1
#                 action: permit
#                 match:
#                   rpki: invalid
#                   metric: 3
#                   peer: 192.0.2.35
#                 set:
#                   local_preference: 6
#                   metric: 4
#                   metric_type: "type-1"
#                   origin: egp
#                   originator_id: 192.0.2.34
#                   tag: 4
#                   weight: 4
#         state: overridden
# After state:

# vyos@vyos:~$ show configuration commands |  match "set policy route-map"
# set policy route-map test3 rule 1 set metric-type 'type-1'
# set policy route-map test3 rule 1 set origin 'egp'
# set policy route-map test3 rule 1 set originator-id '192.0.2.34'
# set policy route-map test3 rule 1 set weight '4'
# set policy route-map test3 rule 1 set local-preference 6
# set policy route-map test3 rule 1 set metric 4
# set policy route-map test3 rule 1 set tag 4
# set policy route-map test3 rule 1 match metric 3
# set policy route-map test3 rule 1 match peer 192.0.2.35
# set policy route-map test3 rule 1 match rpki 'invalid'

# Module Execution:
# "after": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 3,
#                         "peer": "192.0.2.35",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "local_preference": "6",
#                         "metric": "4",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "4",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "before": [
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "description": "test",
#                     "on_match": {
#                         "next": true
#                     },
#                     "sequence": 1
#                 },
#                 {
#                     "action": "permit",
#                     "on_match": {
#                         "goto": 4
#                     },
#                     "sequence": 2
#                 }
#             ],
#             "route_map": "test2"
#         },
#         {
#             "entries": [
#                 {
#                     "action": "permit",
#                     "match": {
#                         "metric": 1,
#                         "peer": "192.0.2.32",
#                         "rpki": "invalid"
#                     },
#                     "sequence": 1,
#                     "set": {
#                         "community": {
#                             "value": "internet"
#                         },
#                         "ip_next_hop": "192.0.2.33",
#                         "local_preference": "4",
#                         "metric": "5",
#                         "metric_type": "type-1",
#                         "origin": "egp",
#                         "originator_id": "192.0.2.34",
#                         "tag": "5",
#                         "weight": "4"
#                     }
#                 }
#             ],
#             "route_map": "test3"
#         }
#     ],
#     "changed": true,
#     "commands": [
#         "delete policy route-map test2",
#         "delete policy route-map test3 rule 1 set ip-next-hop 192.0.2.33",
#         "set policy route-map test3 rule 1 set local-preference 6",
#         "set policy route-map test3 rule 1 set metric 4",
#         "set policy route-map test3 rule 1 set tag 4",
#         "delete policy route-map test3 rule 1 set community internet",
#         "set policy route-map test3 rule 1 match metric 3",
#         "set policy route-map test3 rule 1 match peer 192.0.2.35"
#     ],
#

Authors

  • Ashwini Mhatre (@amhatre)