You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

arista.eos.eos_acl_interfaces module – ACL interfaces resource module

Note

This module is part of the arista.eos collection (version 3.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_acl_interfaces.

New in version 1.0.0: of arista.eos

Synopsis
Parameters
Examples
Return Values

Synopsis 

This module manages adding and removing Access Control Lists (ACLs) from interfaces on devices running EOS software.

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of ACL options for interfaces.
access_groups list / elements=dictionary	Specifies ACLs attached to the interfaces.
acls list / elements=dictionary	Specifies the ACLs for the provided AFI.
direction string / required	Specifies the direction of packets that the ACL will be applied on. Choices: in out
name string / required	Specifies the name of the IPv4/IPv4 ACL for the interface.
afi string / required	Specifies the AFI for the ACL(s) to be configured on this interface. Choices: ipv4 ipv6
name string / required	Name/Identifier for the interface.
running_config string	The module, by default, will connect to the remote device and retrieve the current running-config to use as a base for comparing against the contents of source. There are times when it is not desirable to have the task get the current running-config for every task in a playbook. The running_config argument allows the implementer to pass in the configuration to use as the base config for comparison. This value of this option should be the output received from device by executing command
state string	The state the configuration should be left in. Choices: merged ← (default) replaced overridden deleted gathered parsed rendered

Examples 

# Using Merged

# Before state:
# -------------
#
# eos#sh running-config | include interface|access-group
# interface Ethernet1
# interface Ethernet2
# interface Ethernet3

- name: Merge module attributes of given access-groups
  arista.eos.eos_acl_interfaces:
    config:
    - name: Ethernet2
      access_groups:
      - afi: ipv4
        acls:
          name: acl01
          direction: in
      - afi: ipv6
        acls:
          name: acl03
          direction: out
    state: merged

# Commands Fired:
# ---------------
#
# interface Ethernet2
# ip access-group acl01 in
# ipv6 access-group acl03 out

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3


# Using Replaced

# Before state:
# -------------
#
# eos#sh running-config | include interface|access-group
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3
#  ip access-group acl01 in

- name: Replace module attributes of given access-groups
  arista.eos.eos_acl_interfaces:
    config:
    - name: Ethernet2
      access_groups:
      - afi: ipv4
        acls:
          name: acl01
          direction: out
    state: replaced

# Commands Fired:
# ---------------
#
# interface Ethernet2
# no ip access-group acl01 in
# no ipv6 access-group acl03 out
# ip access-group acl01 out

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 out
# interface Ethernet3
#  ip access-group acl01 in


# Using Overridden

# Before state:
# -------------
#
# eos#sh running-config | include interface|access-group
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3
#  ip access-group acl01 in

- name: Override module attributes of given access-groups
  arista.eos.eos_acl_interfaces:
    config:
    - name: Ethernet2
      access_groups:
      - afi: ipv4
        acls:
          name: acl01
          direction: out
    state: overridden

# Commands Fired:
# ---------------
#
# interface Ethernet2
# no ip access-group acl01 in
# no ipv6 access-group acl03 out
# ip access-group acl01 out
# interface Ethernet3
# no ip access-group acl01 in

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 out
# interface Ethernet3


# Using Deleted

# Before state:
# -------------
#
# eos#sh running-config | include interface|access-group
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3
#  ip access-group acl01 out

- name: Delete module attributes of given access-groups
  arista.eos.eos_acl_interfaces:
    config:
    - name: Ethernet2
      access_groups:
      - afi: ipv4
        acls:
          name: acl01
          direction: in
      - afi: ipv6
        acls:
          name: acl03
          direction: out
    state: deleted

# Commands Fired:
# ---------------
#
# interface Ethernet2
# no ip access-group acl01 in
# no ipv6 access-group acl03 out

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
# interface Ethernet3
#  ip access-group acl01 out


# Before state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3
#  ip access-group acl01 out

- name: Delete module attributes of given access-groups from ALL Interfaces
  arista.eos.eos_acl_interfaces:
    config:
    state: deleted

# Commands Fired:
# ---------------
#
# interface Ethernet2
# no ip access-group acl01 in
# no ipv6 access-group acl03 out
# interface Ethernet3
# no ip access-group acl01 out

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
# interface Ethernet3

# Before state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Ethernet1
# interface Ethernet2
#  ip access-group acl01 in
#  ipv6 access-group acl03 out
# interface Ethernet3
#  ip access-group acl01 out

- name: Delete acls under afi
  arista.eos.eos_acl_interfaces:
    config:
    - name: Ethernet3
      access_groups:
      - afi: ipv4
    - name: Ethernet2
      access_groups:
      - afi: ipv6
    state: deleted

# Commands Fired:
# ---------------
#
# interface Ethernet2
# no ipv6 access-group acl03 out
# interface Ethernet3
# no ip access-group acl01 out

# After state:
# -------------
#
# eos#sh running-config | include interface| access-group
# interface Loopback888
# interface Ethernet1
# interface Ethernet2
#   ip access-group acl01 in
# interface Ethernet3

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
before list / elements=string	The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: [“interface Ethernet2”, “ip access-group acl01 in”, “ipv6 access-group acl03 out”, “interface Ethernet3”, “ip access-group acl01 out”]

Authors

GomathiSelvi S (@GomathiselviS)

Collection links

Issue Tracker Repository (Sources)

arista.eos.eos_acl_interfaces module – ACL interfaces resource module

Synopsis

Parameters

Examples

Return Values