arista.eos.eos_lacp_interfaces module – LACP interfaces resource module

Note

This module is part of the arista.eos collection (version 3.1.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install arista.eos.

To use it in a playbook, specify: arista.eos.eos_lacp_interfaces.

New in version 1.0.0: of arista.eos

Synopsis

  • This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on Arista EOS devices.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A dictionary of LACP interfaces options.

name

string

Full name of the interface (i.e. Ethernet1).

port_priority

integer

LACP port priority for the interface. Range 1-65535.

timer

aliases: rate

string

Rate at which PDUs are sent by LACP. At fast rate LACP is transmitted once every 1 second. At normal rate LACP is transmitted every 30 seconds after the link is bundled.

Choices:

  • fast

  • normal

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the EOS device by executing the command show running-config | section ^interfaces.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion.

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • parsed

  • rendered

  • gathered

Notes

Note

  • Tested against Arista EOS 4.24.6F

  • This module works with connection network_cli. See the EOS Platform Options.

Examples

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Merge provided configuration with device configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    - name: Ethernet2
      rate: normal
    state: merged

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
#    lacp rate fast
# interface Ethernet2


# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Replace existing LACP configuration of specified interfaces with provided
    configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    state: replaced

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp rate fast
# interface Ethernet2
#    lacp rate fast


# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Override the LACP configuration of all the interfaces with provided configuration
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    state: overridden

#
# -----------
# After state
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp rate fast
# interface Ethernet2


# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Delete LACP attributes of given interfaces (or all interfaces if none specified).
  arista.eos.eos_lacp_interfaces:
    state: deleted

#
# -----------
# After state
# -----------
#
# veos#show run | section ^interface
# interface Ethernet1
# interface Ethernet2

# using rendered:

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_lacp_interfaces:
    config:
    - name: Ethernet1
      rate: fast
    - name: Ethernet2
      rate: normal
    state: rendered

#
# -----------
# Output
# -----------
# rendered:
#   - "interface Ethernet1"
#   - "lacp rate fast"

# Using parsed:

# parsed.cfg:
#    "interface Ethernet1"
#    "lacp rate fast"
#    "interface Ethernet2"

- name: Use parsed to convert native configs to structured data
  arista.eos.eos_lacp_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Output:
# parsed:
#   - name: Ethernet1
#     rate: fast
#   - name: Ethernet2
#     rate: normal

# Using gathered:
# native config:
#  veos#show run | section ^interface
# interface Ethernet1
#    lacp port-priority 30
# interface Ethernet2
#    lacp rate fast

- name: Gather LACP facts from the device
  arista.eos.eos_lacp_interfaces:
    state: gathered

# Output:
# gathered:
#   - name: Ethernet1
#   - name: Ethernet2
#     rate: fast

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“interface Ethernet1”, “lacp rate fast”]

Authors

  • Nathaniel Case (@Qalthos)