You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.ios.ios_ospf_interfaces module – Resource module to configure OSPF interfaces.

Note

This module is part of the cisco.ios collection (version 2.8.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ios.

To use it in a playbook, specify: cisco.ios.ios_ospf_interfaces.

New in version 1.0.0: of cisco.ios

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module configures and manages the Open Shortest Path First (OSPF) version 2 on IOS platforms.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of OSPF interfaces options.
address_family list / elements=dictionary	OSPF interfaces settings on the interfaces in address-family context.
adjacency boolean	Adjacency staggering Choices: no yes
afi string / required	Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces. Choices: ipv4 ipv6
authentication dictionary	Enable authentication
key_chain string	Use a key-chain for cryptographic authentication keys
message_digest boolean	Use message-digest authentication Choices: no yes
null boolean	Use no authentication Choices: no yes
bfd boolean	BFD configuration commands Enable/Disable BFD on this interface Choices: no yes
cost dictionary	Interface cost
dynamic_cost dictionary	Specify dynamic cost options Valid only with IPv6 OSPF config
default integer	Specify default link metric value
hysteresis dictionary	Specify hysteresis value for LSA dampening
percent integer	Specify hysteresis percent changed. Please refer vendor documentation of Valid values.
threshold integer	Specify hysteresis threshold value. Please refer vendor documentation of Valid values.
weight dictionary	Specify weight to be placed on individual metrics
l2_factor integer	Specify weight to be given to L2-factor metric Percentage weight of L2-factor metric. Please refer vendor documentation of Valid values.
latency integer	Specify weight to be given to latency metric. Percentage weight of latency metric. Please refer vendor documentation of Valid values.
oc boolean	Specify weight to be given to cdr/mdr for oc Give 100 percent weightage for current data rate(0 for maxdatarate) Choices: no yes
resources integer	Specify weight to be given to resources metric Percentage weight of resources metric. Please refer vendor documentation of Valid values.
throughput integer	Specify weight to be given to throughput metric Percentage weight of throughput metric. Please refer vendor documentation of Valid values.
interface_cost integer	Interface cost or Route cost of this interface
database_filter boolean	Filter OSPF LSA during synchronization and flooding Choices: no yes
dead_interval dictionary	Interval after which a neighbor is declared dead
minimal integer	Set to 1 second and set multiplier for Hellos Number of Hellos sent within 1 second. Please refer vendor documentation of Valid values. Valid only with IP OSPF config
time integer	time in seconds
demand_circuit dictionary	OSPF Demand Circuit, enable or disable the demand circuit’
disable boolean	Disable demand circuit on this interface Valid only with IPv6 OSPF config Choices: no yes
enable boolean	Enable Demand Circuit Choices: no yes
ignore boolean	Ignore demand circuit auto-negotiation requests Choices: no yes
flood_reduction boolean	OSPF Flood Reduction Choices: no yes
hello_interval integer	Time between HELLO packets Please refer vendor documentation of Valid values.
lls boolean	Link-local Signaling (LLS) support Valid only with IP OSPF config Choices: no yes
manet dictionary	Mobile Adhoc Networking options MANET Peering options Valid only with IPv6 OSPF config
cost dictionary	Redundant path cost improvement required to peer
percent integer	Relative incremental path cost. Please refer vendor documentation of Valid values.
threshold integer	Absolute incremental path cost. Please refer vendor documentation of Valid values.
link_metrics dictionary	Redundant path cost improvement required to peer
cost_threshold integer	Minimum link cost threshold. Please refer vendor documentation of Valid values.
set boolean	Enable link-metrics Choices: no yes
mtu_ignore boolean	Ignores the MTU in DBD packets Choices: no yes
multi_area dictionary	Set the OSPF multi-area ID Valid only with IP OSPF config
cost integer	Interface cost
id integer	OSPF multi-area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF multi-area ID in IP address format(e.g. A.B.C.D)
neighbor dictionary	OSPF neighbor link-local IPv6 address (X:X:X:X::X) Valid only with IPv6 OSPF config
address string	Neighbor link-local IPv6 address
cost integer	OSPF cost for point-to-multipoint neighbor
database_filter boolean	Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor Choices: no yes
poll_interval integer	OSPF dead-router polling interval
priority integer	OSPF priority of non-broadcast neighbor
network dictionary	Network type
broadcast boolean	Specify OSPF broadcast multi-access network Choices: no yes
manet boolean	Specify MANET OSPF interface type Valid only with IPv6 OSPF config Choices: no yes
non_broadcast boolean	Specify OSPF NBMA network Choices: no yes
point_to_multipoint boolean	Specify OSPF point-to-multipoint network Choices: no yes
point_to_point boolean	Specify OSPF point-to-point network Choices: no yes
prefix_suppression boolean	Enable/Disable OSPF prefix suppression Choices: no yes
priority integer	Router priority. Please refer vendor documentation of Valid values.
process dictionary	OSPF interfaces process config
area_id string	OSPF interfaces area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF interfaces area ID in IP address format(e.g. A.B.C.D)
id integer	Address Family Identifier (AFI) for OSPF interfaces settings on the interfaces. Please refer vendor documentation of Valid values.
instance_id integer	Set the OSPF instance based on ID Valid only with IPv6 OSPF config
secondaries boolean	Include or exclude secondary IP addresses. Valid only with IPv4 config Choices: no yes
resync_timeout integer	Interval after which adjacency is reset if oob-resync is not started. Please refer vendor documentation of Valid values.
retransmit_interval integer	Time between retransmitting lost link state advertisements. Please refer vendor documentation of Valid values.
shutdown boolean	Set OSPF protocol’s state to disable under current interface Choices: no yes
transmit_delay integer	Link state transmit delay. Please refer vendor documentation of Valid values.
ttl_security dictionary	TTL security check Valid only with IPV4 OSPF config
hops integer	Maximum number of IP hops allowed Please refer vendor documentation of Valid values.
set boolean	Enable TTL Security on all interfaces Choices: no yes
name string / required	Full name of the interface excluding any logical unit number, i.e. GigabitEthernet0/1.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command sh running-config \| section ^interface. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in The states rendered, gathered and parsed does not perform any change on the device. The state rendered will transform the configuration in `config` option to platform specific CLI commands which will be returned in the rendered key within the result. For state rendered active connection to remote host is not required. The state gathered will fetch the running configuration from device and transform it into structured data in the format as per the resource module argspec and the value is returned in the gathered key within the result. The state parsed reads the configuration from `running_config` option and transforms it into JSON format as per the resource module parameters and the value is returned in the parsed key within the result. The value of `running_config` option should be the same format as the output of command show running-config \| include ip route\|ipv6 route executed on device. For state parsed active connection to remote host is not required. Choices: merged ← (default) replaced overridden deleted gathered rendered parsed

Notes 

Note

Tested against Cisco IOSv Version 15.2 on VIRL.
This module works with connection network_cli. See https://docs.ansible.com/ansible/latest/network/user_guide/platform_ios.html

Examples 

# Using deleted

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

- name: Delete provided OSPF Interface config
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
    state: deleted

#  Commands Fired:
#  ---------------
#
#  "commands": [
#         "interface GigabitEthernet0/1",
#         "no ipv6 ospf 55 area 105",
#         "no ipv6 ospf adjacency stagger disable",
#         "no ipv6 ospf priority 20",
#         "no ipv6 ospf transmit-delay 30"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

# Using deleted without any config passed (NOTE: This will delete all OSPF Interfaces configuration from device)

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

- name: Delete all OSPF config from interfaces
  cisco.ios.ios_ospf_interfaces:
    state: deleted

# Commands Fired:
# ---------------
#
#  "commands": [
#         "interface GigabitEthernet0/2",
#         "no ip ospf 10 area 20",
#         "no ip ospf adjacency stagger disable",
#         "no ip ospf cost 30",
#         "no ip ospf priority 40",
#         "no ip ospf ttl-security hops 50",
#         "interface GigabitEthernet0/1",
#         "no ipv6 ospf 55 area 105",
#         "no ipv6 ospf adjacency stagger disable",
#         "no ipv6 ospf priority 20",
#         "no ipv6 ospf transmit-delay 30"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
# interface GigabitEthernet0/2

# Using merged

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# router-ios#

- name: Merge provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 30
            adjacency: true
            bfd: true
            cost:
              interface_cost: 5
            dead_interval:
              time: 5
            demand_circuit:
              ignore: true
            network:
              broadcast: true
            priority: 25
            resync_timeout: 10
            shutdown: true
            ttl_security:
              hops: 50
          - afi: ipv6
            process:
              id: 35
              area_id: 45
            adjacency: true
            database_filter: true
            manet:
              link_metrics:
                cost_threshold: 10
            priority: 55
            transmit_delay: 45
    state: merged

#  Commands Fired:
#  ---------------
#
#   "commands": [
#         "interface GigabitEthernet0/1",
#         "ip ospf 10 area 30",
#         "ip ospf adjacency stagger disable",
#         "ip ospf bfd",
#         "ip ospf cost 5",
#         "ip ospf dead-interval 5",
#         "ip ospf demand-circuit ignore",
#         "ip ospf network broadcast",
#         "ip ospf priority 25",
#         "ip ospf resync-timeout 10",
#         "ip ospf shutdown",
#         "ip ospf ttl-security hops 50",
#         "ipv6 ospf 35 area 45",
#         "ipv6 ospf adjacency stagger disable",
#         "ipv6 ospf database-filter all out",
#         "ipv6 ospf manet peering link-metrics 10",
#         "ipv6 ospf priority 55",
#         "ipv6 ospf transmit-delay 45"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

# Using overridden

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Override provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv6
            process:
              id: 55
              area_id: 105
            adjacency: true
            priority: 20
            transmit_delay: 30
      - name: GigabitEthernet0/2
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 20
            adjacency: true
            cost:
              interface_cost: 30
            priority: 40
            ttl_security:
              hops: 50
    state: overridden

# Commands Fired:
# ---------------
#
#  "commands": [
#         "interface GigabitEthernet0/2",
#         "ip ospf 10 area 20",
#         "ip ospf adjacency stagger disable",
#         "ip ospf cost 30",
#         "ip ospf priority 40",
#         "ip ospf ttl-security hops 50",
#         "interface GigabitEthernet0/1",
#         "ipv6 ospf 55 area 105",
#         "no ipv6 ospf database-filter all out",
#         "no ipv6 ospf manet peering link-metrics 10",
#         "ipv6 ospf priority 20",
#         "ipv6 ospf transmit-delay 30",
#         "no ip ospf 10 area 30",
#         "no ip ospf adjacency stagger disable",
#         "no ip ospf bfd",
#         "no ip ospf cost 5",
#         "no ip ospf dead-interval 5",
#         "no ip ospf demand-circuit ignore",
#         "no ip ospf network broadcast",
#         "no ip ospf priority 25",
#         "no ip ospf resync-timeout 10",
#         "no ip ospf shutdown",
#         "no ip ospf ttl-security hops 50"
#     ]

# After state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable
# interface GigabitEthernet0/2
#  ip ospf priority 40
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf 10 area 20
#  ip ospf cost 30

# Using replaced

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Replaced provided OSPF Interfaces configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/2
        address_family:
          - afi: ipv6
            process:
              id: 55
              area_id: 105
            adjacency: true
            priority: 20
            transmit_delay: 30
    state: replaced

# Commands Fired:
# ---------------
#  "commands": [
#         "interface GigabitEthernet0/2",
#         "ipv6 ospf 55 area 105",
#         "ipv6 ospf adjacency stagger disable",
#         "ipv6 ospf priority 20",
#         "ipv6 ospf transmit-delay 30"
#     ]

# After state:
# -------------
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2
#  ipv6 ospf 55 area 105
#  ipv6 ospf priority 20
#  ipv6 ospf transmit-delay 30
#  ipv6 ospf adjacency stagger disable

# Using Gathered

# Before state:
# -------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

- name: Gather OSPF Interfaces provided configurations
  cisco.ios.ios_ospf_interfaces:
    config:
    state: gathered

# Module Execution Result:
# ------------------------
#
#  "gathered": [
#         {
#             "name": "GigabitEthernet0/2"
#         },
#         {
#             "address_family": [
#                 {
#                     "adjacency": true,
#                     "afi": "ipv4",
#                     "bfd": true,
#                     "cost": {
#                         "interface_cost": 5
#                     },
#                     "dead_interval": {
#                         "time": 5
#                     },
#                     "demand_circuit": {
#                         "ignore": true
#                     },
#                     "network": {
#                         "broadcast": true
#                     },
#                     "priority": 25,
#                     "process": {
#                         "area_id": "30",
#                         "id": 10
#                     },
#                     "resync_timeout": 10,
#                     "shutdown": true,
#                     "ttl_security": {
#                         "hops": 50
#                     }
#                 },
#                 {
#                     "adjacency": true,
#                     "afi": "ipv6",
#                     "database_filter": true,
#                     "manet": {
#                         "link_metrics": {
#                             "cost_threshold": 10
#                         }
#                     },
#                     "priority": 55,
#                     "process": {
#                         "area_id": "45",
#                         "id": 35
#                     },
#                     "transmit_delay": 45
#                 }
#             ],
#             "name": "GigabitEthernet0/1"
#         },
#         {
#             "name": "GigabitEthernet0/0"
#         }
#  ]

# After state:
# ------------
#
# router-ios#sh running-config | section ^interface
# interface GigabitEthernet0/0
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/2

# Using Rendered

- name: Render the commands for provided  configuration
  cisco.ios.ios_ospf_interfaces:
    config:
      - name: GigabitEthernet0/1
        address_family:
          - afi: ipv4
            process:
              id: 10
              area_id: 30
            adjacency: true
            bfd: true
            cost:
              interface_cost: 5
            dead_interval:
              time: 5
            demand_circuit:
              ignore: true
            network:
              broadcast: true
            priority: 25
            resync_timeout: 10
            shutdown: true
            ttl_security:
              hops: 50
          - afi: ipv6
            process:
              id: 35
              area_id: 45
            adjacency: true
            database_filter: true
            manet:
              link_metrics:
                cost_threshold: 10
            priority: 55
            transmit_delay: 45
    state: rendered

# Module Execution Result:
# ------------------------
#
#  "rendered": [
#         "interface GigabitEthernet0/1",
#         "ip ospf 10 area 30",
#         "ip ospf adjacency stagger disable",
#         "ip ospf bfd",
#         "ip ospf cost 5",
#         "ip ospf dead-interval 5",
#         "ip ospf demand-circuit ignore",
#         "ip ospf network broadcast",
#         "ip ospf priority 25",
#         "ip ospf resync-timeout 10",
#         "ip ospf shutdown",
#         "ip ospf ttl-security hops 50",
#         "ipv6 ospf 35 area 45",
#         "ipv6 ospf adjacency stagger disable",
#         "ipv6 ospf database-filter all out",
#         "ipv6 ospf manet peering link-metrics 10",
#         "ipv6 ospf priority 55",
#         "ipv6 ospf transmit-delay 45"
#     ]

# Using Parsed

# File: parsed.cfg
# ----------------
#
# interface GigabitEthernet0/2
# interface GigabitEthernet0/1
#  ip ospf network broadcast
#  ip ospf resync-timeout 10
#  ip ospf dead-interval 5
#  ip ospf priority 25
#  ip ospf demand-circuit ignore
#  ip ospf bfd
#  ip ospf adjacency stagger disable
#  ip ospf ttl-security hops 50
#  ip ospf shutdown
#  ip ospf 10 area 30
#  ip ospf cost 5
#  ipv6 ospf 35 area 45
#  ipv6 ospf priority 55
#  ipv6 ospf transmit-delay 45
#  ipv6 ospf database-filter all out
#  ipv6 ospf adjacency stagger disable
#  ipv6 ospf manet peering link-metrics 10
# interface GigabitEthernet0/0

- name: Parse the provided configuration with the existing running configuration
  cisco.ios.ios_ospf_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
#  "parsed": [
#         },
#         {
#             "name": "GigabitEthernet0/2"
#         },
#         {
#             "address_family": [
#                 {
#                     "adjacency": true,
#                     "afi": "ipv4",
#                     "bfd": true,
#                     "cost": {
#                         "interface_cost": 5
#                     },
#                     "dead_interval": {
#                         "time": 5
#                     },
#                     "demand_circuit": {
#                         "ignore": true
#                     },
#                     "network": {
#                         "broadcast": true
#                     },
#                     "priority": 25,
#                     "process": {
#                         "area_id": "30",
#                         "id": 10
#                     },
#                     "resync_timeout": 10,
#                     "shutdown": true,
#                     "ttl_security": {
#                         "hops": 50
#                     }
#                 },
#                 {
#                     "adjacency": true,
#                     "afi": "ipv6",
#                     "database_filter": true,
#                     "manet": {
#                         "link_metrics": {
#                             "cost_threshold": 10
#                         }
#                     },
#                     "priority": 55,
#                     "process": {
#                         "area_id": "45",
#                         "id": 35
#                     },
#                     "transmit_delay": 45
#                 }
#             ],
#             "name": "GigabitEthernet0/1"
#         },
#         {
#             "name": "GigabitEthernet0/0"
#         }
#     ]

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
before dictionary	The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: [“interface GigabitEthernet0/1”, “ip ospf 10 area 30”, “ip ospf cost 5”, “ip ospf priority 25”]

Authors

Sumit Jaiswal (@justjais)

Collection links

Issue Tracker Repository (Sources)

cisco.ios.ios_ospf_interfaces module – Resource module to configure OSPF interfaces.

Synopsis

Parameters

Notes

Examples

Return Values