You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_bgp_global module – Manages BGP global resource module.

Note

This module is part of the cisco.iosxr collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_bgp_global.

New in version 2.0.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples

Synopsis 

This module configures and manages the attributes of BGP global on Cisco IOS-XR platforms.

Parameters 

Parameter	Comments
config dictionary	A list of configurations for BGP global.
as_number string	Autonomous system number of the router.
bfd dictionary	Configure BFD parameters.
minimum_interval integer	Specifies the BFD session’s minimum-interval value for the neighbor.
multiplier integer	Specifies the BFD session’s multiplier value for the neighbor.
bgp dictionary	BGP parameters.
as_path_loopcheck boolean	Enable AS-path loop checking for iBGP peers. Choices: no yes
auto_policy_soft_reset dictionary	Enable automatic soft peer reset on policy reconfiguration.
disable boolean	Disable an automatic soft reset of Border Gateway Protocol (BGP) peers. Choices: no yes
bestpath dictionary	Select the bestpath selection algorithim for BGP routes.
aigp dictionary	AIGP attribute
ignore boolean	Ignore AIGP attribute. Choices: no yes
as_path dictionary	Select the bestpath selection based on as-path.
ignore boolean	ignore Choices: no yes
multipath_relax boolean	multipath-relax Choices: no yes
compare_routerid boolean	Compare router-id for identical EBGP paths. Choices: no yes
cost_community dictionary	Cost community.
ignore boolean	ignore cost_community Choices: no yes
med dictionary	MED attribute
always boolean	Allow comparing MED from different neighbors. Choices: no yes
confed boolean	Compare MED among confederation paths. Choices: no yes
missing_as_worst boolean	Treat missing MED as the least preferred one. Choices: no yes
origin_as dictionary	BGP origin-AS knobs.
allow dictionary	BGP origin-AS knobs.
invalid boolean	BGP bestpath selection will allow ‘invalid’ origin-AS Choices: no yes
use dictionary	BGP origin-AS knobs.
validity boolean	BGP bestpath selection will use origin-AS validity Choices: no yes
cluster_id string	Cluster ID of this router acting as a route reflector.
confederation dictionary	confederation.
identifier integer	Set routing domain confederation AS.
peers list / elements=integer	Enter peer ASs in BGP confederation mode.
default dictionary	Configure default value.
local_preference integer	local preferance. Please refer vendor documentation for valid values
enforce_first_as dictionary	Enforce the first AS for EBGP routes
disable boolean	disable enforce 1st as Choices: no yes
fast_external_fallover dictionary	Immediately reset session if a link to a directly connected external peer goes down.
disable boolean	disable fast external fallover. Choices: no yes
graceful_restart dictionary	Enable graceful restart support.
graceful_reset boolean	Reset gracefully if configuration change forces a peer reset. Choices: no yes
purge_time integer	Time before stale routes are purged in seconds <1-6000>.
restart_time integer	Restart time advertised to neighbors in seconds <1-4095>.
set boolean	Enable graceful-restart. Choices: no yes
stalepath_time integer	Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
install dictionary	Install diversion path to RIB/CEF.
diversion boolean	Install diversion path to RIB/CEF. Choices: no yes
log dictionary	Log bgp info
log_message dictionary	Log neighbor inbound/outbound message.
disable boolean	disable inbound outbound messages. Choices: no yes
neighbor dictionary	Log neighbor state info.
changes dictionary	Log neighbor up/down and reset reason.
detail boolean	detail Choices: no yes
disable boolean	disable Choices: no yes
maximum dictionary	Maximum number of neighbors that can be configured
neighbor integer	Maximum number of neighbors <1-15000>.
multipath dictionary	Change multipath selection criteria
as_path dictionary	AS path
ignore dictionary	Ignore as-path related check for multipath selection.
onwards boolean	Ignore everything onwards as-path for multipath selection. Choices: no yes
origin_as dictionary	BGP origin-AS knobs.
validation dictionary	BGP origin-AS validation knobs.
disable boolean	Disable RPKI origin-AS validation. Choices: no yes
signal dictionary	Signal origin-AS validity towards peers.
ibgp boolean	Signal origin-AS validity towards iBGP peers Choices: no yes
time dictionary	Time to wait between an RPKI update and a BGP table walk.
time_in_second integer	Prefix validation time (in seconds).
time_off boolean	No automatic prefix validation after an RPKI update. Choices: no yes
redistribute_internal boolean	Redistribute internal BGP routes. Choices: no yes
router_id string	Configure Router-id. Example- A.B.C.D IPv4 address.
scan_time integer	Configure background scanner interval for generic scanner Example- <5-3600>.
unsafe_ebgp_policy boolean	Make eBGP neighbors with no policy pass all routes(cisco-support). Choices: no yes
update_delay integer	Set the max initial delay for sending updates Example-<0-3600> in secs.
default_information dictionary	Control distribution of default information.
originate boolean	Distribute a default route Choices: no yes
default_metric integer	Default metric. Example-<1-4294967295>.
graceful_maintenance dictionary	This allows the router to be brought in or out of service gracefully.
activate string	All neighbors with graceful-maintenance config Choices: all-neighbors retain-routes all-neighbors retain-routes :ansible-option-choices-entry:``
ibgp dictionary	Set options for iBGP peers.
policy dictionary	Set options for route-policy.
out dictionary	Set options for outbound policy.
enforce_modifications boolean	Allow policy to modify all attributes. Choices: no yes
mpls dictionary	Enable mpls parameters.
activate dictionary	Enter mpls interfaces in BGP mpls activate mode.
interface string	Name of interface to enable mpls.
mvpn boolean	Connect to PIM/PIM6. Choices: no yes
neighbors list / elements=dictionary	Specify a neighbor router.
advertisement_interval integer	Minimum interval between sending BGP routing updates.Example-<0-600>.
bfd dictionary	Configure BFD parameters.
fast_detect dictionary	Enable Fast detection
disable boolean	Prevent bfd settings from being inherited from the parent. Choices: no yes
strict_mode boolean	Hold down neighbor session until BFD session is up Choices: no yes
minimum_interval integer	Specifies the BFD session’s minimum-interval value for the neighbor.
multiplier integer	Specifies the BFD session’s multiplier value for the neighbor.
bmp_activate dictionary	Enable BMP logging for this neighbor.
server integer	Enable BMP connection to particular server.Example-<1-8>.
capability dictionary	Advertise capability to the peer.
additional_paths dictionary	BGP additional-paths commands.
receive dictionary	Additional paths receive capability
disable boolean	set receive capability Choices: no yes
set boolean	set receive capability Choices: no yes
send dictionary	Additional paths Send capability
disable boolean	set send capability Choices: no yes
set boolean	set send capability Choices: no yes
suppress dictionary	Suppress advertising capability to the peer.
all dictionary	all capability
inheritance_disable boolean	Do not inherit this configuration from parent group. Choices: no yes
set boolean	set all. Choices: no yes
four_byte_AS dictionary	4-byte-as capability
set boolean	set 4_byte_as. Choices: no yes
cluster_id string	Cluster ID of this router acting as a route reflector.
description string	Neighbor specific description.
dmz_link_bandwidth dictionary	Propagate the DMZ link bandwidth.
inheritance_disable boolean	Do not inherit this configuration from parent group. Choices: no yes
set boolean	set dmz-link-bandwidth. Choices: no yes
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
ebgp_multihop dictionary	Allow EBGP neighbors not on directly connected networks.
mpls boolean	Disable BGP MPLS forwarding. Choices: no yes
value integer	maximum hop count.Example-<1-255>.
ebgp_recv_extcommunity_dmz dictionary	Receive extcommunity dmz link bandwidth from ebgp neighbor.
inheritance_disable boolean	Prevent ebgp-recv-community-dmz from being inherited from parent Choices: no yes
set boolean	set ebgp-recv-community-dmz. Choices: no yes
ebgp_send_extcommunity_dmz dictionary	Send extcommunity dmz link bandwidth from ebgp neighbor.
cumulatie boolean	Send cumulative community dmz link bandwidth of all multipaths to ebgp neighbor. Choices: no yes
inheritance_disable boolean	Prevent ebgp-send-community-dmz from being inherited from parent Choices: no yes
set boolean	set ebgp-send-community-dmz. Choices: no yes
egress_engineering dictionary	Enable egress peer engineering for this neighbor.
inheritance_disable boolean	Prevent egress-engineering from being inherited from parent Choices: no yes
set boolean	set egress-engineering. Choices: no yes
enforce_first_as dictionary	Enforce the first AS for EBGP routes
disable boolean	disable enforce 1st as Choices: no yes
graceful_maintenance dictionary	Attributes for Graceful Maintenance. This will cause neighbors to de-prefer routes from this router and choose alternates. This allows the router to be brought in or out of service gracefully.
activate dictionary	Routes will be announced with the graceful maintenance attributes while activated either here or under router bgp configuration.
inheritance_disable boolean	Prevent activate from being inherited from the parent. Choices: no yes
set boolean	activate. Choices: no yes
as_prepends dictionary	Number of times to prepend the local AS number to the AS path of routes. Default=0
inheritance_disable boolean	Prevent as prepends from being inherited from the parent. Choices: no yes
value integer	Range of values for as prepends.Example-<0-6> .
local_preference dictionary	local preference with which to advertise routes to ibgp neigbors. Default=No Touch
inheritance_disable boolean	Prevent local preference from being inherited from the parent. Choices: no yes
value integer	Range of values for Local Preference.Example-<0-4294967295> .
set boolean	set graceful maintenance. Choices: no yes
graceful_restart dictionary	Enable graceful restart support for this neighbor.
restart_time integer	Restart time advertised to neighbors in seconds <1-4095>.
stalepath_time integer	Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
ignore_connected_check dictionary	Bypass the directly connected nexthop check for single-hop eBGP peering
inheritance_disable boolean	Prevent ignore-connected-check from being inherited from the parent Choices: no yes
set boolean	set ignore-connected-check. Choices: no yes
keychain dictionary	Set keychain based authentication.
inheritance_disable boolean	Prevent keychain from being inherited from parent. Choices: no yes
name string	Name of the key chain - maximum 32 characters.
local dictionary	Configure local parameter
address dictionary	IPv4 address
inheritance_disable boolean	Prevent local address from being inherited from parent. Choices: no yes
ipv4_address string	IPv4 address <A.B.C.D>.
local_as dictionary	Specify local AS number.
inheritance_disable boolean	Prevent local AS from being inherited from parent. Choices: no yes
value integer	2 byte, 4 byte As number
log dictionary	Logging update messages per neighbor.
log_message dictionary	Logging update/notification messages per neighbor.
in dictionary	Inbound log messages
disable boolean	Disable inbound message logging. Choices: no yes
inheritance_disable boolean	Prevents the msg log from being inherited from the parent. Choices: no yes
value integer	Range for message log buffer size <1-100>.
out dictionary	Outbound log messages
disable boolean	Disable inbound message logging. Choices: no yes
inheritance_disable boolean	Prevents the msg log from being inherited from the parent. Choices: no yes
value integer	Range for message log buffer size <1-100>.
neighbor_address aliases: neighbor string / required	Neighbor router address.
origin_as dictionary	BGP origin-AS knobs.
validation dictionary	BGP origin-AS validation knobs.
disable boolean	Disable RPKI origin-AS validation. Choices: no yes
receive_buffer_size integer	Set socket and BGP receive buffer size.Example <512-131072>.
remote_as integer	Neighbor Autonomous System.
send_buffer_size integer	Set socket and BGP send buffer size.Example <4096-131072>.
session_open_mode string	Establish BGP session using this TCP open mode. Choices: active-only both passive-only
shutdown dictionary	Administratively shut down this neighbor.
inheritance_disable boolean	Prevent shutdown from being inherited from parent Choices: no yes
set boolean	shutdown. Choices: no yes
tcp dictionary	TCP session configuration commands.
mss dictionary	Maximum Segment Size.
inheritance_disable boolean	Prevent mss from being inherited from parent Choices: no yes
value integer	TCP initial maximum segment size.
timers dictionary	BGP per neighbor timers.
holdtime integer	hold time <3-65535> or 0 Disable hold time.
keepalive_time integer	keepalive interval <0-65535>.
ttl_security dictionary	Enable EBGP TTL security.
inheritance_disable boolean	Prevent ttl-security from being inherited from parent Choices: no yes
set boolean	set ttl-security Choices: no yes
update dictionary	BGP Update configuration.
in dictionary	Inbound update message handling.
filtering dictionary	Inbound update message filtering
attribute_filter dictionary	Attribute-filter configuration.
group string	Name of group.
logging dictionary	Update filtering syslog message.
disable boolean	Disable update filtering syslog message. Choices: no yes
update_message dictionary	Filtered update messages.
buffers integer	Number of buffers to store filtered update messages.
update_source string	Source of routing updates.Refer vendor document for valid values.
nsr dictionary	Enable non-stop-routing support for all neighbors.
disable boolean	disable nsr Choices: no yes
set boolean	set nsr Choices: no yes
rpki dictionary	Configure RPKI.
route dictionary	Configure an RPKI route.A.B.C.D/length or X:X::X/length Network/Minimum prefix length
max integer	Maximum prefix length. Example- <1-128> .
origin integer	Origin Autonomous System number (in asplain format) Example-<1-4294967295>.
value string	A.B.C.D/length or X:X::X/length Network/Minimum prefix length.
servers list / elements=dictionary	Configure RPKI cache-servers.
name string	address of rpki server.
purge_time integer	Time to wait after a cache goes down to clean up stale routes
refresh_time dictionary	Time between sending serial-queries for the RPKI cache-server
time_off boolean	Do not send serial-queries periodically Choices: no yes
value integer	Purge time (in seconds) <30-360>
response_time dictionary	Time to wait for a response from the RPKI cache-server
time_off boolean	Wait indefinitely for a response Choices: no yes
value integer	Purge time (in seconds) <15-3600>
shutdown boolean	Shutdown the RPKI cache-server Choices: no yes
transport dictionary	Specify a transport method for the RPKI cache-server
ssh dictionary	Connect to the RPKI cache-server using SSH
port integer	Specify a port number for the RPKI cache-server transport
tcp dictionary	Connect to the RPKI cache-server using TCP (unencrypted)
port integer	Specify a port number for the RPKI cache-server transport
socket dictionary	set socket parameters.
receive_buffer_size integer	socket receive buffer size.Example-<512-131072>.
send_buffer_size integer	socket send buffer size.Example- <4096-131072>.
timers dictionary	BGP per neighbor timers.
holdtime integer	hold time <3-65535> or 0 Disable hold time.
keepalive_time integer	keepalive interval <0-65535>.
update dictionary	BGP Update configuration.
in dictionary	Inbound update message handling
error_handling dictionary	Inbound update message error handling.
basic dictionary	Inbound update message basic error handling
ebgp dictionary	Inbound update message basic error handling for EBGP neighbors
disable boolean	disable Choices: no yes
ibgp dictionary	Inbound update message basic error handling for ibgp neighbors
disable boolean	disable Choices: no yes
extended dictionary	Inbound update message extended error handling
ebgp boolean	Inbound update message extended error handling for EBGP neighbors Choices: no yes
ibgp boolean	Inbound update message extended error handling for ibgp neighbors Choices: no yes
limit integer	Upper bound on transient memory usage for update generation.Example-<16-2048>.
out dictionary	BGP Update generation configuration.
logging boolean	Enable logging of update generation events. Choices: no yes
vrfs list / elements=dictionary	Specify a vrf name.
bfd dictionary	Configure BFD parameters.
minimum_interval integer	Specifies the BFD session’s minimum-interval value for the neighbor.
multiplier integer	Specifies the BFD session’s multiplier value for the neighbor.
bgp dictionary	BGP commands.
auto_policy_soft_reset dictionary	Enable automatic soft peer reset on policy reconfiguration.
disable boolean	Disable an automatic soft reset of Border Gateway Protocol (BGP) peers. Choices: no yes
bestpath dictionary	Select the bestpath selection algorithim for BGP routes.
aigp dictionary	AIGP attribute
ignore boolean	Ignore AIGP attribute. Choices: no yes
as_path dictionary	Select the bestpath selection based on as-path.
ignore boolean	ignore Choices: no yes
multipath_relax boolean	multipath-relax Choices: no yes
compare_routerid boolean	Compare router-id for identical EBGP paths. Choices: no yes
cost_community dictionary	Cost community.
ignore boolean	ignore cost_community Choices: no yes
med dictionary	MED attribute
always boolean	Allow comparing MED from different neighbors. Choices: no yes
confed boolean	Compare MED among confederation paths. Choices: no yes
missing_as_worst boolean	Treat missing MED as the least preferred one. Choices: no yes
origin_as dictionary	BGP origin-AS knobs.
allow dictionary	BGP origin-AS knobs.
invalid boolean	BGP bestpath selection will allow ‘invalid’ origin-AS Choices: no yes
use dictionary	BGP origin-AS knobs.
validity boolean	BGP bestpath selection will use origin-AS validity Choices: no yes
default dictionary	Configure default value.
local_preference integer	local preferance. Please refer vendor documentation for valid values
enforce_first_as dictionary	Enforce the first AS for EBGP routes
disable boolean	disable enforce 1st as Choices: no yes
fast_external_fallover dictionary	Immediately reset session if a link to a directly connected external peer goes down.
disable boolean	disable fast external fallover. Choices: no yes
log dictionary	Log bgp info
log_message dictionary	Log neighbor inbound/outbound message.
disable boolean	disable inbound outbound messages. Choices: no yes
neighbor dictionary	Log neighbor state info.
changes dictionary	Log neighbor up/down and reset reason.
detail boolean	detail Choices: no yes
disable boolean	disable Choices: no yes
multipath dictionary	Change multipath selection criteria
as_path dictionary	AS path
ignore dictionary	Ignore as-path related check for multipath selection.
onwards boolean	Ignore everything onwards as-path for multipath selection. Choices: no yes
redistribute_internal boolean	Redistribute internal BGP routes. Choices: no yes
router_id string	Configure Router-id. Example- A.B.C.D IPv4 address.
unsafe_ebgp_policy boolean	Make eBGP neighbors with no policy pass all routes(cisco-support). Choices: no yes
default_information dictionary	Control distribution of default information.
originate boolean	Distribute a default route Choices: no yes
default_metric integer	Default metric. Example-<1-4294967295>.
mpls dictionary	Enable mpls parameters.
activate dictionary	Enter mpls interfaces in BGP mpls activate mode.
interface string	Name of interface to enable mpls.
neighbors list / elements=dictionary	Specify a neighbor router.
advertisement_interval integer	Minimum interval between sending BGP routing updates.Example-<0-600>.
bfd dictionary	Configure BFD parameters.
fast_detect dictionary	Enable Fast detection
disable boolean	Prevent bfd settings from being inherited from the parent. Choices: no yes
strict_mode boolean	Hold down neighbor session until BFD session is up Choices: no yes
minimum_interval integer	Specifies the BFD session’s minimum-interval value for the neighbor.
multiplier integer	Specifies the BFD session’s multiplier value for the neighbor.
bmp_activate dictionary	Enable BMP logging for this neighbor.
server integer	Enable BMP connection to particular server.Example-<1-8>.
capability dictionary	Advertise capability to the peer.
additional_paths dictionary	BGP additional-paths commands.
receive dictionary	Additional paths receive capability
disable boolean	set receive capability Choices: no yes
set boolean	set receive capability Choices: no yes
send dictionary	Additional paths Send capability
disable boolean	set send capability Choices: no yes
set boolean	set send capability Choices: no yes
suppress dictionary	Suppress advertising capability to the peer.
all dictionary	all capability
inheritance_disable boolean	Do not inherit this configuration from parent group. Choices: no yes
set boolean	set all. Choices: no yes
four_byte_AS dictionary	4-byte-as capability
set boolean	set 4_byte_as. Choices: no yes
cluster_id string	Cluster ID of this router acting as a route reflector.
description string	Neighbor specific description.
dmz_link_bandwidth dictionary	Propagate the DMZ link bandwidth.
inheritance_disable boolean	Do not inherit this configuration from parent group. Choices: no yes
set boolean	set dmz-link-bandwidth. Choices: no yes
dscp string	Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries.
ebgp_multihop dictionary	Allow EBGP neighbors not on directly connected networks.
mpls boolean	Disable BGP MPLS forwarding. Choices: no yes
value integer	maximum hop count.Example-<1-255>.
ebgp_recv_extcommunity_dmz dictionary	Receive extcommunity dmz link bandwidth from ebgp neighbor.
inheritance_disable boolean	Prevent ebgp-recv-community-dmz from being inherited from parent Choices: no yes
set boolean	set ebgp-recv-community-dmz. Choices: no yes
ebgp_send_extcommunity_dmz dictionary	Send extcommunity dmz link bandwidth from ebgp neighbor.
cumulatie boolean	Send cumulative community dmz link bandwidth of all multipaths to ebgp neighbor. Choices: no yes
inheritance_disable boolean	Prevent ebgp-send-community-dmz from being inherited from parent Choices: no yes
set boolean	set ebgp-send-community-dmz. Choices: no yes
egress_engineering dictionary	Enable egress peer engineering for this neighbor.
inheritance_disable boolean	Prevent egress-engineering from being inherited from parent Choices: no yes
set boolean	set egress-engineering. Choices: no yes
enforce_first_as dictionary	Enforce the first AS for EBGP routes
disable boolean	disable enforce 1st as Choices: no yes
graceful_maintenance dictionary	Attributes for Graceful Maintenance. This will cause neighbors to de-prefer routes from this router and choose alternates. This allows the router to be brought in or out of service gracefully.
activate dictionary	Routes will be announced with the graceful maintenance attributes while activated either here or under router bgp configuration.
inheritance_disable boolean	Prevent activate from being inherited from the parent. Choices: no yes
set boolean	activate. Choices: no yes
as_prepends dictionary	Number of times to prepend the local AS number to the AS path of routes. Default=0
inheritance_disable boolean	Prevent as prepends from being inherited from the parent. Choices: no yes
value integer	Range of values for as prepends.Example-<0-6> .
local_preference dictionary	local preference with which to advertise routes to ibgp neigbors. Default=No Touch
inheritance_disable boolean	Prevent local preference from being inherited from the parent. Choices: no yes
value integer	Range of values for Local Preference.Example-<0-4294967295> .
set boolean	set graceful maintenance. Choices: no yes
graceful_restart dictionary	Enable graceful restart support for this neighbor.
restart_time integer	Restart time advertised to neighbors in seconds <1-4095>.
stalepath_time integer	Maximum time to wait for restart of GR capable peers in seconds <1-4095>.
ignore_connected_check dictionary	Bypass the directly connected nexthop check for single-hop eBGP peering
inheritance_disable boolean	Prevent ignore-connected-check from being inherited from the parent Choices: no yes
set boolean	set ignore-connected-check. Choices: no yes
keychain dictionary	Set keychain based authentication.
inheritance_disable boolean	Prevent keychain from being inherited from parent. Choices: no yes
name string	Name of the key chain - maximum 32 characters.
local dictionary	Configure local parameter
address dictionary	IPv4 address
inheritance_disable boolean	Prevent local address from being inherited from parent. Choices: no yes
ipv4_address string	IPv4 address <A.B.C.D>.
local_as dictionary	Specify local AS number.
inheritance_disable boolean	Prevent local AS from being inherited from parent. Choices: no yes
value integer	2 byte, 4 byte As number
log dictionary	Logging update messages per neighbor.
log_message dictionary	Logging update/notification messages per neighbor.
in dictionary	Inbound log messages
disable boolean	Disable inbound message logging. Choices: no yes
inheritance_disable boolean	Prevents the msg log from being inherited from the parent. Choices: no yes
value integer	Range for message log buffer size <1-100>.
out dictionary	Outbound log messages
disable boolean	Disable inbound message logging. Choices: no yes
inheritance_disable boolean	Prevents the msg log from being inherited from the parent. Choices: no yes
value integer	Range for message log buffer size <1-100>.
neighbor_address aliases: neighbor string / required	Neighbor router address.
origin_as dictionary	BGP origin-AS knobs.
validation dictionary	BGP origin-AS validation knobs.
disable boolean	Disable RPKI origin-AS validation. Choices: no yes
receive_buffer_size integer	Set socket and BGP receive buffer size.Example <512-131072>.
remote_as integer	Neighbor Autonomous System.
send_buffer_size integer	Set socket and BGP send buffer size.Example <4096-131072>.
session_open_mode string	Establish BGP session using this TCP open mode. Choices: active-only both passive-only
shutdown dictionary	Administratively shut down this neighbor.
inheritance_disable boolean	Prevent shutdown from being inherited from parent Choices: no yes
set boolean	shutdown. Choices: no yes
tcp dictionary	TCP session configuration commands.
mss dictionary	Maximum Segment Size.
inheritance_disable boolean	Prevent mss from being inherited from parent Choices: no yes
value integer	TCP initial maximum segment size.
timers dictionary	BGP per neighbor timers.
holdtime integer	hold time <3-65535> or 0 Disable hold time.
keepalive_time integer	keepalive interval <0-65535>.
ttl_security dictionary	Enable EBGP TTL security.
inheritance_disable boolean	Prevent ttl-security from being inherited from parent Choices: no yes
set boolean	set ttl-security Choices: no yes
update dictionary	BGP Update configuration.
in dictionary	Inbound update message handling.
filtering dictionary	Inbound update message filtering
attribute_filter dictionary	Attribute-filter configuration.
group string	Name of group.
logging dictionary	Update filtering syslog message.
disable boolean	Disable update filtering syslog message. Choices: no yes
update_message dictionary	Filtered update messages.
buffers integer	Number of buffers to store filtered update messages.
update_source string	Source of routing updates.Refer vendor document for valid values.
rd dictionary	route distinguisher.
auto boolean	Automatic route distinguisher. Choices: no yes
socket dictionary	set socket parameters.
receive_buffer_size integer	socket receive buffer size.Example-<512-131072>.
send_buffer_size integer	socket send buffer size.Example- <4096-131072>.
timers dictionary	BGP per neighbor timers.
holdtime integer	hold time <3-65535> or 0 Disable hold time.
keepalive_time integer	keepalive interval <0-65535>.
vrf string	VRF name.
running_config string	The state the configuration should be left in. - State purged removes all the BGP configurations from the target device. Use caution with this state. - State deleted only removes BGP attributes that this modules manages and does not negate the BGP process completely. Thereby, preserving address-family related configurations under BGP context. - Running states deleted and replaced will result in an error if there are address-family configuration lines present under a neighbor, or a vrf context that is to be removed. Please use the cisco.iosxr.iosxr_bgp_address_family or cisco.iosxr.iosxr_bgp_neighbor_address_family modules for prior cleanup. - Refer to examples for more details.
state string	The state the configuration should be left in. Choices: deleted merged ← (default) replaced gathered rendered parsed purged

Notes 

Note

This module works with connection network_cli.

Examples 

##### Using Merged ##########################################
-----------------------------------------------------------------

# configuration on device  Before merge state:


#RP/0/0/CPU0:10#show running-config router bgp
#Thu Feb  4 09:38:36.245 UTC
#% No such configuration item(s)
#RP/0/0/CPU0:10#

# --------------Merge state---------------
#  - name: Merge the following configuration
#       cisco.iosxr.iosxr_bgp_global:
#         config:
#             as_number: 65536
#             default_metric: 5
#             socket:
#               receive_buffer_size: 514
#               send_buffer_size: 4098
#             bgp:
#               confederation:
#                 identifier: 4
#               bestpath:
#                 med:
#                   confed: True
#               cluster_id: 5
#               router_id: 192.0.2.10
#             neighbors:
#               - neighbor: 192.0.2.13
#                 remote_as: 65538
#                 bfd:
#                   fast_detect:
#                     strict_mode: True
#                   multiplier: 6
#                   minimum_interval: 20
#             vrfs:
#               - vrf: vrf1
#                 default_metric: 5
# ----------------------------------------
#


# commands:
# - "router bgp 65536",
# - "bgp cluster-id 5",
# - "bgp router-id 192.0.2.10",
# - "bgp bestpath med confed",
# - "bgp confederation identifier 4",
# - "default-metric 5",
# - "socket receive-buffer-size 514",
# - "socket send-buffer-size 4098",
# - "neighbor 192.0.2.13",
# - "bfd fast-detect strict-mode",
# - "bfd minimum-interval 20",
# - "bfd multiplier 6",
# - "remote-as 65538",
# - "vrf vrf1",
# - "default-metric 5"

# Configuration on device After Merge state:
# --------------------------------------------

# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:44:32.480 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !

##### Using replaced ###########################################

# configuration on device before replaced
# --------------------------------------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:44:32.480 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 5
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.13
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !
# --------------Replace state---------------
# - name: Replace the following configuration
#       cisco.iosxr.iosxr_bgp_global:
#         state: replaced
#         config:
#             as_number: 65536
#             default_metric: 4
#             socket:
#               receive_buffer_size: 514
#               send_buffer_size: 4098
#             bgp:
#               confederation:
#                 identifier: 4
#               bestpath:
#                 med:
#                   confed: True
#               cluster_id: 5
#               router_id: 192.0.2.10
#             neighbors:
#               - neighbor: 192.0.2.14
#                 remote_as: 65538
#                 bfd:
#                   fast_detect:
#                     strict_mode: True
#                   multiplier: 6
#                   minimum_interval: 20
#             vrfs:
#               - vrf: vrf1
#                 default_metric: 5
# -------------------------------------------
# commands:
# - "router bgp 65536",
# - "default-metric 4",
# - "neighbor 192.0.2.14",
# - "bfd fast-detect strict-mode",
# - "bfd minimum-interval 20",
# - "bfd multiplier 6",
# - "remote-as 65538",
# - "no neighbor 192.0.2.13"

# configuration on device After Replaced  state:
# ----------------------------------------------

# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !


##### Using deleted ############################################

# configuration on device Before deleted state
# ---------------------------------------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !
#
# --------------------------------------------------------
# - name: Delete BGP configurations handled by this module
#  cisco.iosxr.iosxr_bgp_global:
#         state: deleted
#         config:
#             as_number: 65536
#
# commands:
# "router bgp 65536",
# "no bgp cluster-id 5",
# "no bgp router-id 192.0.2.10",
# "no bgp bestpath med confed",
# "no bgp confederation identifier 4",
# "no default-metric 4",
# "no socket receive-buffer-size 514",
# "no socket send-buffer-size 4098",
# "no neighbor 192.0.2.14",
# "no vrf vrf1"
#
# configuration on device after delete
# -------------------------------------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 10:01:08.232 UTC
# router bgp 65536
# !
#


################# Using Purged ########################################

# configuration on device Before Purged state
# --------------------------------------------
#
# RP/0/0/CPU0:10#show running-config router bgp
# Thu Feb  4 09:54:11.161 UTC
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  address-family ipv4 unicast
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#   address-family ipv4 unicast
#  !
#  vrf vrf1
#   default-metric 5
#  !
# !
#
# - name: Purge all BGP configurations from the device
#   cisco.iosxr.iosxr_bgp_global:
#     state: purged
#
#  commands:
# - no router bgp 65563
#
# configuration on device After purged state:
# ---------------------------------------------
#
# #RP/0/0/CPU0:10#show running-config router bgp
# #Thu Feb  4 09:38:36.245 UTC
# #% No such configuration item(s)
# #RP/0/0/CPU0:10#
#
#
# ################# Using Rendred #######################################################
#
# - name: Render platform specific configuration lines (without connecting to the device)
#   cisco.iosxr.iosxr_bgp_global:
#         state: rendered
#         config:
#             as_number: 1
#             default_metric: 4
#             vrfs:
#               - vrf: vrf3
#                 bfd:
#                   minimum_interval: 20
#                   multiplier: 10
#                 bgp:
#                   fast_external_fallover:
#                     disable: True
#                   router_id: 1.2.3.4
#                   auto_policy_soft_reset:
#                     disable: True
#                 #rd:
#                 #  auto: True
#                 #  #value: 1
#                 timers:
#                   keepalive_time: 20
#                   holdtime: 30
#               - vrf: vrf2
#                 bgp:
#                   enforce_first_as:
#                     disable: True
#                 default_metric: 4
#                 neighbors:
#                   - neighbor: 1.1.1.3
#                     remote_as: 2
#                     graceful_maintenance:
#                       set: True
#                       activate:
#                         #set: True
#                         inheritance_disable: True
#                       local_preference:
#                         value: 1
#                         #inheritance_disable: True
#                       as_prepends:
#                         value: 2
# rendered output
# ------------------------------------
#   "router bgp 1",
#   "default-metric 4",
#   "vrf vrf3",
#   "bfd multiplier 10",
#   "bfd minimum-interval 20",
#   "bgp auto-policy-soft-reset disable",
#   "bgp fast-external-fallover disable",
#   "bgp router-id 1.2.3.4",
#   "timers bgp 20 30",
#   "vrf vrf2",
#   "neighbor 1.1.1.3",
#   "remote-as 2",
#   "graceful-maintenance",
#   "graceful-maintenance activate inheritance-disable",
#   "graceful-maintenance local-preference 1",
#   "graceful-maintenance as-prepends 2",
#   "bgp enforce-first-as disable",
#   "default-metric 4"
#
# ############## Using parsed #####################
#  parsed.cfg
#  ------------
# router bgp 65536
#  bgp confederation identifier 4
#  bgp router-id 192.0.2.10
#  bgp cluster-id 5
#  default-metric 4
#  socket send-buffer-size 4098
#  bgp bestpath med confed
#  socket receive-buffer-size 514
#  neighbor 192.0.2.11
#   remote-as 65537
#   cluster-id 3
#  !
#  neighbor 192.0.2.14
#   remote-as 65538
#   bfd fast-detect strict-mode
#   bfd multiplier 6
#   bfd minimum-interval 20
#  !
# !
# ------------------------------------
#
# - name: Parse externally provided BGP config
#   cisco.iosxr.iosxr_bgp_global:
#     running_config: "{{ lookup('file', 'parsed.cfg') }}"
#     state: parsed
#
# #Task output using parsed
#     as_number: "65536"
#     default_metric: 4
#     socket:
#       receive_buffer_size: 514
#       send_buffer_size: 4098
#     bgp:
#       confederation:
#         identifier: 4
#       bestpath:
#         med:
#           confed: true
#       cluster_id: "5"
#       router_id: "192.0.2.10"
#     neighbors:
#       - neighbor: 192.0.2.11
#         remote_as: 65537
#         cluster_id: "3"
#       - neighbor: "192.0.2.14"
#         remote_as: 65538
#         bfd:
#           fast_detect:
#             strict_mode: true
#           multiplier: 6
#           minimum_interval: 20

Authors

Ashwini Mhatre (@amhatre)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_bgp_global module – Manages BGP global resource module.

Synopsis

Parameters

Notes

Examples