cisco.iosxr.iosxr_bgp module – Configure global BGP protocol settings on Cisco IOS-XR

Note

This module is part of the cisco.iosxr collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_bgp.

New in version 1.0.0: of cisco.iosxr

DEPRECATED

Removed in

major release after 2023-01-29

Why

Updated module released with more functionality.

Alternative

iosxr_bgp_global

Synopsis

  • This module provides configuration management of global BGP parameters on devices running Cisco IOS-XR

Parameters

Parameter

Comments

config

dictionary

Specifies the BGP related configuration.

address_family

list / elements=dictionary

Specifies BGP address family related configurations.

afi

string / required

Type of address family to configure.

Choices:

  • ipv4

  • ipv6

networks

list / elements=dictionary

Specify networks to announce via BGP.

For operation replace, this option is mutually exclusive with root level networks option.

masklen

integer / required

Subnet mask length for the network to announce(e.g, 8, 16, 24, etc.).

network

aliases: prefix

string / required

Network ID to announce via BGP.

route_map

string

Route map to modify the attributes.

redistribute

list / elements=dictionary

Specifies the redistribute information from another routing protocol.

id

string

Identifier for the routing protocol for configuring redistribute information.

Valid for protocols ‘ospf’, ‘eigrp’, ‘isis’ and ‘ospfv3’.

metric

integer

Specifies the metric for redistributed routes.

protocol

string / required

Specifies the protocol for configuring redistribute information.

Choices:

  • ospf

  • ospfv3

  • eigrp

  • isis

  • static

  • connected

  • lisp

  • mobile

  • rip

  • subscriber

route_map

string

Specifies the route map reference.

safi

string

Specifies the type of cast for the address family.

Choices:

  • flowspec

  • unicast ← (default)

  • multicast

  • labeled-unicast

bgp_as

integer / required

Specifies the BGP Autonomous System (AS) number to configure on the device.

log_neighbor_changes

boolean

Enable/disable logging neighbor up/down and reset reason.

Choices:

  • no

  • yes

neighbors

list / elements=dictionary

Specifies BGP neighbor related configurations.

advertisement_interval

integer

Specifies the minimum interval (in seconds) between sending BGP routing updates.

The range is from 0 to 600.

description

string

Neighbor specific description.

ebgp_multihop

integer

Specifies the maximum hop count for EBGP neighbors not on directly connected networks.

The range is from 0 to 255.

enabled

boolean

Administratively shutdown or enable a neighbor.

Choices:

  • no

  • yes

neighbor

string / required

Neighbor router address.

password

string

Password to authenticate the BGP peer connection.

remote_as

integer / required

Remote AS of the BGP neighbor to configure.

tcp_mss

integer

Specifies the TCP initial maximum segment size to use.

The range is from 68 to 10000.

timers

dictionary

Specifies BGP neighbor timer related configurations.

holdtime

integer

Interval after not receiving a keepalive message that the software declares a peer dead.

The range is from 3 to 65535.

keepalive

integer

Frequency with which the Cisco IOS-XR software sends keepalive messages to its peer.

The range is from 0 to 65535.

min_neighbor_holdtime

integer

Interval specifying the minimum acceptable hold-time from a BGP neighbor.

The minimum acceptable hold-time must be less than, or equal to, the interval specified in the holdtime argument.

The range is from 3 to 65535.

update_source

string

Source of the routing updates.

router_id

string

Configures the BGP routing process router-id value.

operation

string

Specifies the operation to be performed on the BGP process configured on the device.

In case of merge, the input configuration will be merged with the existing BGP configuration on the device.

In case of replace, if there is a diff between the existing configuration and the input configuration, the existing configuration will be replaced by the input configuration for every option that has the diff.

In case of override, all the existing BGP configuration will be removed from the device and replaced with the input configuration.

In case of delete the existing BGP configuration will be removed from the device.

Choices:

  • merge ← (default)

  • replace

  • override

  • delete

Notes

Note

Examples

- name: configure global bgp as 65000
  cisco.iosxr.iosxr_bgp:
    bgp_as: 65000
    router_id: 1.1.1.1
    neighbors:
    - neighbor: 182.168.10.1
      remote_as: 500
      description: PEER_1
    - neighbor: 192.168.20.1
      remote_as: 500
      update_source: GigabitEthernet 0/0/0/0
    address_family:
    - name: ipv4
      cast: unicast
      networks:
      - network: 192.168.2.0/23
      - network: 10.0.0.0/8
      redistribute:
      - protocol: ospf
        id: 400
        metric: 110

- name: remove bgp as 65000 from config
  ios_bgp:
    bgp_as: 65000
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

commands

list / elements=string

The list of configuration mode commands to send to the device

Returned: always

Sample: [“router bgp 65000”, “bgp router-id 1.1.1.1”, “neighbor 182.168.10.1 remote-as 500”, “neighbor 182.168.10.1 description PEER_1”, “neighbor 192.168.20.1 remote-as 500”, “neighbor 192.168.20.1 update-source GigabitEthernet0/0/0/0”, “address-family ipv4 unicast”, “redistribute ospf 400 metric 110”, “network 192.168.2.0/23”, “network 10.0.0.0/8”, “exit”]

Status

  • This module will be removed in a major release after 2023-01-29. [deprecated]

  • For more information see DEPRECATED.

Authors

  • Nilashish Chakraborty (@NilashishC)