You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_lacp_interfaces module – LACP interfaces resource module

Note

This module is part of the cisco.iosxr collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_lacp_interfaces.

New in version 1.0.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

This module manages Link Aggregation Control Protocol (LACP) attributes of interfaces on IOS-XR devices.

Parameters 

Parameter	Comments
config list / elements=dictionary	A dictionary of LACP interfaces options.
churn_logging string	Specifies the parameter for logging of LACP churn events. Valid only for ether-bundles. Mode ‘actor’ logs actor churn events only. Mode ‘partner’ logs partner churn events only. Mode ‘both’ logs actor and partner churn events only. Choices: actor partner both
collector_max_delay integer	Specifies the collector max delay to be signaled to the LACP partner. Valid only for ether-bundles. Refer to vendor documentation for valid values.
name string	Name/Identifier of the interface or Ether-Bundle.
period integer	Specifies the rate at which packets are sent or received. For ether-bundles, this specifies the period to be used by its member links. Refer to vendor documentation for valid values.
switchover_suppress_flaps integer	Specifies the time for which to suppress flaps during a LACP switchover. Valid only for ether-bundles. Refer to vendor documentation for valid values.
system dictionary	This dict object contains configurable options related to LACP system parameters for ether-bundles.
mac string	Specifies the system ID to use in LACP negotiations for the bundle, encoded as a MAC address.
priority integer	Specifies the system priority to use in LACP negotiations for the bundle. Refer to vendor documentation for valid values.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config int. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state of the configuration after module completion. Choices: merged ← (default) replaced overridden deleted parsed gathered rendered

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options.

Examples 

# Using merged
#
#
# ------------
# Before state
# ------------
#
#
#
# RP/0/0/CPU0:an-iosxr#sh running-config interface
# Sun Jul 21 18:01:35.079 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1'
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#

- name: Merge provided configuration with device configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: actor
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: Bundle-Ether11
      system:
        mac: 00c2.4c00.bd15

    - name: GigabitEthernet0/0/0/1
      period: 200
    state: merged

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#


# Using replaced
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#

- name: Replace LACP configuration of listed interfaces with provided configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: partner

    - name: GigabitEthernet0/0/0/2
      period: 300
    state: replaced

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:50:21.929 UTC
# interface Bundle-Ether10
#  lacp churn logging partner
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  lacp period 300
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#


# Using overridden
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#
#

- name: Override all interface LACP configuration with provided configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether12
      churn_logging: both
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: GigabitEthernet0/0/0/1
      period: 300
    state: overridden

#
#
# -----------
# After state
# -----------
#
#
# RP/0/0/CPU0:an-iosxr(config-if)#do sh run int
# Sun Jul 21 19:32:36.115 UTC
# interface Bundle-Ether10
# !
# interface Bundle-Ether11
# !
# interface Bundle-Ether12
#  lacp churn logging both
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 300
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#


# Using deleted
#
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr#sh run int
# Sun Jul 21 18:24:52.413 UTC
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp non-revertive
# !
# interface Bundle-Ether12
# !
# interface Loopback888
#  description test for ansible
#  shutdown
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  description 'GigabitEthernet - 1"
#  lacp period 200
# !
# interface GigabitEthernet0/0/0/2
#  description "GigabitEthernet - 2"
#   lacp period 300
# !
# interface GigabitEthernet0/0/0/3
#  description "GigabitEthernet - 3"
# !
# interface GigabitEthernet0/0/0/4
#  description "GigabitEthernet - 4"
# !
#

- name: Deleted LACP configurations of provided interfaces (Note - This won't delete
    the interface itself)
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
    - name: Bundle-Ether11
    - name: GigabitEthernet0/0/0/1
    - name: GigabitEthernet0/0/0/2
    state: deleted

#
#
# -----------
# After state
# -----------
#
#
# Using parsed:

# parsed.cfg
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  lacp period 200
# !
#

- name: Convert lacp interfaces config to argspec without connecting to the appliance
  cisco.iosxr.iosxr_lacp_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# --------------
# Output:
# --------------

#    parsed:
#      - name: Bundle-Ether10
#        churn_logging: actor
#        collector_max_delay: 100
#        switchover_suppress_flaps: 500
#
#      - name: Bundle-Ether11
#        system:
#          mac: 00c2.4c00.bd15
#
#      - name: GigabitEthernet0/0/0/1
#        period: 200
#
#

# Using gathered:

# Native config:
# interface Bundle-Ether10
#  lacp churn logging actor
#  lacp switchover suppress-flaps 500
#  lacp collector-max-delay 100
# !
# interface Bundle-Ether11
#  lacp system mac 00c2.4c00.bd15
# !
# interface MgmtEth0/0/CPU0/0
#  ipv4 address 192.0.2.11 255.255.255.0
# !
# interface GigabitEthernet0/0/0/1
#  lacp period 200
# !
#

- name: Gather IOSXR lacp interfaces configuration
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    state: gathered

# ----------
# Output
# ---------
#    gathered:
#      - name: Bundle-Ether10
#        churn_logging: actor
#        collector_max_delay: 100
#        switchover_suppress_flaps: 500
#
#      - name: Bundle-Ether11
#        system:
#          mac: 00c2.4c00.bd15
#
#      - name: GigabitEthernet0/0/0/1
#        period: 200

# Using rendered:

- name: Render platform specific commands from task input using rendered state
  cisco.iosxr.iosxr_lacp_interfaces:
    config:
    - name: Bundle-Ether10
      churn_logging: actor
      collector_max_delay: 100
      switchover_suppress_flaps: 500

    - name: Bundle-Ether11
      system:
        mac: 00c2.4c00.bd15

    - name: GigabitEthernet0/0/0/1
      period: 200
    state: rendered

# -------------
# Output
# -------------
# rendered: [
#     - "interface Bundle-Ether10"
#     - " lacp churn logging actor"
#     - " lacp switchover suppress-flaps 500"
#     - " lacp collector-max-delay 100"
#     - "interface Bundle-Ether11"
#     - " lacp system mac 00c2.4c00.bd15"
#     - "interface MgmtEth0/0/CPU0/0"
#     - " ipv4 address 192.0.2.11 255.255.255.0"
#     - "interface GigabitEthernet0/0/0/1"
#     - " lacp period 200"
#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The configuration as structured data after module completion. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
before list / elements=string	The configuration as structured data prior to module invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: [“interface Bundle-Ether10”, “lacp churn logging partner”, “lacp period 150”]

Authors

Nilashish Chakraborty (@nilashishc)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_lacp_interfaces module – LACP interfaces resource module

Synopsis

Parameters

Notes

Examples

Return Values