cisco.iosxr.iosxr_logging_global module – Manages logging attributes of Cisco IOSXR network devices
Note
This module is part of the cisco.iosxr collection (version 2.9.0).
You might already have this collection installed if you are using the ansible package.
It is not included in ansible-core.
To check whether it is installed, run ansible-galaxy collection list.
To install it, use: ansible-galaxy collection install cisco.iosxr.
To use it in a playbook, specify: cisco.iosxr.iosxr_logging_global.
New in version 2.4.0: of cisco.iosxr
Parameters
Parameter |
Comments |
|---|---|
A dictionary of logging options. |
|
logging to a persistent device(disk/harddisk) |
|
The maximum no of weeks of log to maintain. |
|
The total size of the archive. |
|
Configure the archive device |
|
The maximum file size for a single log file.. |
|
The collection interval for logs. Choices:
|
|
Logging severity level Choices:
|
|
Threshold percent <1-99>. |
|
Set buffered logging parameters |
|
Establish MD-Buffer association |
|
Set match/no-match discriminator. Choices:
|
|
discriminator name. |
|
Logging severity level Choices:
|
|
Logging buffer size |
|
Set console logging parameters |
|
Establish MD-Buffer association |
|
Set match/no-match discriminator. Choices:
|
|
discriminator name. |
|
Logging severity level Choices:
|
|
Enable or disable logging. Choices:
|
|
Configure properties of the event correlator |
|
Configure size of the correlator buffer. |
|
Configure a specified correlation ruleset. |
|
Name of the ruleset |
|
Name of the rule |
|
Configure a specified correlation rule. |
|
Specify enable correlation on context. Choices:
|
|
Specify reissue of non-bistate alarms on parent clear.This option is allowed for the rules whose type is stateful. Choices:
|
|
Specify reparent of alarm on parent clear.This option is allowed for the rules whose type is stateful. Choices:
|
|
name of rule. |
|
type of rule - stateful or nonstateful. Choices:
|
|
Specify timeout. |
|
Specify timeout for root-cause. |
|
Configure event monitoring parameters. |
|
Set size of the local event buffer. |
|
Include alarm source location in message text. Choices:
|
|
Configure filter. |
|
Logging severity level Choices:
|
|
Capacity alarm threshold. |
|
Facility parameter for syslog messages Choices:
|
|
Set file logging. |
|
Set max file size. |
|
name of file. |
|
Set file path. |
|
Logging severity level Choices:
|
|
Enable to send the syslog message rfc5424 format . Choices:
|
|
Configure syslog history table |
|
Logging severity level Choices:
|
|
Logging buffer size |
|
Enable or disable logging. Choices:
|
|
Hostname prefix to add on msgs to servers. |
|
Set syslog server IP address and parameters |
|
IPv4/Ipv6 address or hostname of the syslog server |
|
Set <0-65535> non-default Port. Default: “default” |
|
Logging severity level Choices:
|
|
Set VRF option Default: “default” |
|
Mark the dscp/precedence bit for ipv4 packets. |
|
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries. |
|
Set precedence Please refer vendor document for valid entries. |
|
Mark the dscp/precedence bit for ipv4 packets. |
|
Set IP DSCP (DiffServ CodePoint).Please refer vendor document for valid entries. |
|
Set precedence Please refer vendor document for valid entries. |
|
Set size of the local log file |
|
Set terminal line (monitor) logging parameters |
|
Establish MD-Buffer association |
|
Set match/no-match discriminator. Choices:
|
|
discriminator name. |
|
Logging severity level Choices:
|
|
Enable or disable logging. Choices:
|
|
Specify interface for source address in logging transactions |
|
Interface name with number |
|
VPN Routing/Forwarding instance name |
|
Suppress logging behaviour. |
|
Apply suppression rule. |
|
Suppress consecutive duplicate messages. Choices:
|
|
Secure server over tls. |
|
Name for the tls peer configuration. |
|
Logging severity level Choices:
|
|
Name of the logging host. |
|
Name of the trustpoint configured. |
|
name of vrf. |
|
Set syslog server logging level |
|
Logging severity level Choices:
|
|
Enable or disable logging. Choices:
|
|
This option is used only with state parsed. The value of this option should be the output received from the IOS device by executing the command show running-config | include logging. The state parsed reads the configuration from |
|
The state the configuration should be left in Choices:
|
Examples
# Using merged
#-----------------
# Before state
#RP/0/0/CPU0:10#show running-config logging
#Thu Feb 4 09:38:36.245 UTC
#% No such configuration item(s)
#RP/0/0/CPU0:10#
#
#
- name: Merge the provided configuration with the existing running configuration
cisco.iosxr.iosxr_logging_global:
config:
buffered:
size: 2097152
severity: warnings
correlator:
buffer_size: 1024
events:
display_location: True
files:
- maxfilesize: '1024'
name: test
path: test
severity: info
hostnameprefix: test
hosts:
- host: 1.1.1.1
port: default
severity: critical
vrf: default
ipv4:
dscp: af11
localfilesize: 1024
monitor:
severity: errors
source_interfaces:
- interface: GigabitEthernet0/0/0/0
vrf: test
tls_servers:
- name: test
tls_hostname: test2
trustpoint: test2
vrf: test
trap:
severity: informational
state: merged
#
#
# After state:
#-------------------------------------------
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#------------------------------------------------
#Module execution
#
# "after": {
# "buffered": {
# "severity": "errors"
# },
# "correlator": {
# "buffer_size": 1024
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test1",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test1",
# "hosts": [
# {
# "host": "1.1.1.3",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv6": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test1"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test",
# "vrf": "test"
# }
# ]
# },
# "before": {},
# "changed": true,
# "commands": [
# "logging buffered errors",
# "logging correlator buffer-size 1024",
# "logging hostnameprefix test1",
# "logging ipv6 dscp af11",
# "logging localfilesize 1024",
# "logging trap disable",
# "logging monitor disable",
# "logging history disable",
# "logging console disable",
# "logging 1.1.1.3 vrf default severity critical port default",
# "logging file test path test1 maxfilesize 1024 severity info",
# "logging source-interface GigabitEthernet0/0/0/0 vrf test1",
# "logging tls-server test tls-hostname test2",
# "logging tls-server test trustpoint test",
# "logging tls-server test vrf test"
# ],
# "invocation": {
# "module_args": {
# "config": {
# "archive": null,
# "buffered": {
# "discriminator": null,
# "severity": "errors",
# "size": null
# },
# "console": {
# "discriminator": null,
# "severity": null,
# "state": "disabled"
# },
# "correlator": {
# "buffer_size": 1024,
# "rule_set": null,
# "rules": null
# },
# "events": null,
# "facility": null,
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test1",
# "severity": "info"
# }
# ],
# "format": null,
# "history": {
# "severity": null,
# "size": null,
# "state": "disabled"
# },
# "hostnameprefix": "test1",
# "hosts": [
# {
# "host": "1.1.1.3",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": null,
# "ipv6": {
# "dscp": "af11",
# "precedence": null
# },
# "localfilesize": 1024,
# "monitor": {
# "discriminator": null,
# "severity": null,
# "state": "disabled"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test1"
# }
# ],
# "suppress": null,
# "tls_servers": [
# {
# "name": "test",
# "severity": null,
# "tls_hostname": "test2",
# "trustpoint": "test",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": null,
# "state": "disabled"
# }
# },
# "running_config": null,
# "state": "merged"
# }
# }
# }
#
# Using replaced:
# -----------------------------------------------------------
#
#Before state
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#-----------------------------------------------------------
#
- name: Replace BGP configuration with provided configuration
cisco.iosxr.iosxr_logging_global:
state: replaced
config:
buffered:
severity: errors
correlator:
buffer_size: 1024
files:
- maxfilesize: '1024'
name: test
path: test1
severity: info
hostnameprefix: test1
hosts:
- host: 1.1.1.3
port: default
severity: critical
vrf: default
ipv6:
dscp: af11
localfilesize: 1024
monitor:
severity: errors
tls_servers:
- name: test
tls_hostname: test2
trustpoint: test
vrf: test
trap:
severity: critical
#
# After state:
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:31:51.709 UTC
# logging tls-server test
# vrf test
# trustpoint test
# tls-hostname test2
# !
# logging file test path test1 maxfilesize 1024 severity info
# logging ipv6 dscp af11
# logging trap critical
# logging monitor errors
# logging buffered errors
# logging 1.1.1.3 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging hostnameprefix test1
#-----------------------------------------------------------------
#
# Module Execution:
# "after": {
# "buffered": {
# "severity": "errors"
# },
# "correlator": {
# "buffer_size": 1024
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test1",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test1",
# "hosts": [
# {
# "host": "1.1.1.3",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv6": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "critical"
# }
# },
# "before": {
# "buffered": {
# "severity": "warnings",
# "size": 2097152
# },
# "correlator": {
# "buffer_size": 1024
# },
# "events": {
# "display_location": true
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test",
# "hosts": [
# {
# "host": "1.1.1.1",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test2",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "informational"
# }
# },
# "changed": true,
# "commands": [
# "no logging buffered 2097152",
# "no logging events display-location",
# "no logging ipv4 dscp af11",
# "no logging 1.1.1.1 vrf default severity critical port default",
# "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
# "logging buffered errors",
# "logging hostnameprefix test1",
# "logging ipv6 dscp af11",
# "logging trap critical",
# "logging 1.1.1.3 vrf default severity critical port default",
# "logging file test path test1 maxfilesize 1024 severity info",
# "logging tls-server test trustpoint test"
# ],
#
#
#
# Using deleted:
# -----------------------------------------------------------
# Before state:
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#-----------------------------------------------------------
- name: Delete given logging_global configuration
cisco.iosxr.iosxr_logging_global:
state: deleted
#
# After state:
#RP/0/0/CPU0:10#show running-config
#
#-------------------------------------------------------------
# Module Execution:
#
# "after": {},
# "before": {
# "buffered": {
# "severity": "warnings",
# "size": 2097152
# },
# "correlator": {
# "buffer_size": 1024
# },
# "events": {
# "display_location": true
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test",
# "hosts": [
# {
# "host": "1.1.1.1",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test2",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "informational"
# }
# },
# "changed": true,
# "commands": [
# "no logging buffered 2097152",
# "no logging buffered warnings",
# "no logging correlator buffer-size 1024",
# "no logging events display-location",
# "no logging hostnameprefix test",
# "no logging ipv4 dscp af11",
# "no logging localfilesize 1024",
# "no logging monitor errors",
# "no logging trap informational",
# "no logging 1.1.1.1 vrf default severity critical port default",
# "no logging file test path test maxfilesize 1024 severity info",
# "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
# "no logging tls-server test"
# ],
# "invocation": {
# "module_args": {
# "config": null,
# "running_config": null,
# "state": "deleted"
# }
# }
#
#
#
# using gathered:
# ------------------------------------------------------------
# Before state:
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#
- name: Gather iosxr_logging_global facts using gathered state
cisco.iosxr.iosxr_logging_global:
state: gathered
#
#-------------------------------------------------------------
# Module Execution:
#
# "changed": false,
# "gathered": {
# "buffered": {
# "severity": "warnings",
# "size": 2097152
# },
# "correlator": {
# "buffer_size": 1024
# },
# "events": {
# "display_location": true
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test",
# "hosts": [
# {
# "host": "1.1.1.1",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test2",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "informational"
# }
# },
# "invocation": {
# "module_args": {
# "config": null,
# "running_config": null,
# "state": "gathered"
# }
# }
#
#
# Using parsed:
#---------------------------------------------------------------
#
# parsed.cfg
#
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#
- name: Parse externally provided Logging global config to agnostic model
cisco.iosxr.iosxr_logging_global:
running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
state: parsed
#----------------------------------------------------------------
# Module execution:
# "changed": false,
# "parsed": {
# "buffered": {
# "severity": "warnings",
# "size": 2097152
# },
# "correlator": {
# "buffer_size": 1024
# },
# "events": {
# "display_location": true
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test",
# "hosts": [
# {
# "host": "1.1.1.1",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test2",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "informational"
# }
# }
#
#
# Using rendered:
# ----------------------------------------------------------------------------
- name: Render platform specific configuration lines with state rendered (without connecting to the device)
cisco.iosxr.iosxr_logging_global:
state: rendered
config:
buffered:
size: 2097152
severity: warnings
correlator:
buffer_size: 1024
events:
display_location: True
files:
- maxfilesize: '1024'
name: test
path: test
severity: info
hostnameprefix: test
hosts:
- host: 1.1.1.1
port: default
severity: critical
vrf: default
ipv4:
dscp: af11
localfilesize: 1024
monitor:
severity: errors
source_interfaces:
- interface: GigabitEthernet0/0/0/0
vrf: test
tls_servers:
- name: test
tls_hostname: test2
trustpoint: test2
vrf: test
trap:
severity: informational
#----------------------------------------------------------------
# Module Execution:
# "rendered": [
# "logging buffered errors",
# "logging correlator buffer-size 1024",
# "logging hostnameprefix test1",
# "logging ipv6 dscp af11",
# "logging localfilesize 1024",
# "logging trap disable",
# "logging monitor disable",
# "logging history disable",
# "logging console disable",
# "logging 1.1.1.3 vrf default severity critical port default",
# "logging file test path test1 maxfilesize 1024 severity info",
# "logging source-interface GigabitEthernet0/0/0/0 vrf test1",
# "logging tls-server test tls-hostname test2",
# "logging tls-server test trustpoint test",
# "logging tls-server test vrf test"
# ]
#
# Using overridden:
# ---------------------------------------------------------------------------------
# Before state:
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:09:18.491 UTC
# logging tls-server test
# vrf test
# trustpoint test2
# tls-hostname test2
# !
# logging file test path test maxfilesize 1024 severity info
# logging ipv4 dscp af11
# logging trap informational
# logging events display-location
# logging monitor errors
# logging buffered 2097152
# logging buffered warnings
# logging 1.1.1.1 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging source-interface GigabitEthernet0/0/0/0 vrf test
# logging hostnameprefix test
#
#-----------------------------------------------------------
#
- name: Overridde logging global configuration with provided configuration
cisco.iosxr.iosxr_logging_global:
state: overridden
config:
buffered:
severity: errors
correlator:
buffer_size: 1024
files:
- maxfilesize: '1024'
name: test
path: test1
severity: info
hostnameprefix: test1
hosts:
- host: 1.1.1.3
port: default
severity: critical
vrf: default
ipv6:
dscp: af11
localfilesize: 1024
monitor:
severity: errors
tls_servers:
- name: test
tls_hostname: test2
trustpoint: test
vrf: test
trap:
severity: critical
#
# After state:
#RP/0/0/CPU0:10#show running-config logging
# Tue Jul 20 18:31:51.709 UTC
# logging tls-server test
# vrf test
# trustpoint test
# tls-hostname test2
# !
# logging file test path test1 maxfilesize 1024 severity info
# logging ipv6 dscp af11
# logging trap critical
# logging monitor errors
# logging buffered errors
# logging 1.1.1.3 vrf default severity critical port default
# logging correlator buffer-size 1024
# logging localfilesize 1024
# logging hostnameprefix test1
#-----------------------------------------------------------------
#
# Module Execution:
# "after": {
# "buffered": {
# "severity": "errors"
# },
# "correlator": {
# "buffer_size": 1024
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test1",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test1",
# "hosts": [
# {
# "host": "1.1.1.3",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv6": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "critical"
# }
# },
# "before": {
# "buffered": {
# "severity": "warnings",
# "size": 2097152
# },
# "correlator": {
# "buffer_size": 1024
# },
# "events": {
# "display_location": true
# },
# "files": [
# {
# "maxfilesize": "1024",
# "name": "test",
# "path": "test",
# "severity": "info"
# }
# ],
# "hostnameprefix": "test",
# "hosts": [
# {
# "host": "1.1.1.1",
# "port": "default",
# "severity": "critical",
# "vrf": "default"
# }
# ],
# "ipv4": {
# "dscp": "af11"
# },
# "localfilesize": 1024,
# "monitor": {
# "severity": "errors"
# },
# "source_interfaces": [
# {
# "interface": "GigabitEthernet0/0/0/0",
# "vrf": "test"
# }
# ],
# "tls_servers": [
# {
# "name": "test",
# "tls_hostname": "test2",
# "trustpoint": "test2",
# "vrf": "test"
# }
# ],
# "trap": {
# "severity": "informational"
# }
# },
# "changed": true,
# "commands": [
# "no logging buffered 2097152",
# "no logging events display-location",
# "no logging ipv4 dscp af11",
# "no logging 1.1.1.1 vrf default severity critical port default",
# "no logging source-interface GigabitEthernet0/0/0/0 vrf test",
# "logging buffered errors",
# "logging hostnameprefix test1",
# "logging ipv6 dscp af11",
# "logging trap critical",
# "logging 1.1.1.3 vrf default severity critical port default",
# "logging file test path test1 maxfilesize 1024 severity info",
# "logging tls-server test trustpoint test"
# ],
#
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
|---|---|
The resulting configuration after module execution. Returned: when changed Sample: “This output will always be in the same format as the module argspec.\n” |
|
The configuration prior to the module execution. Returned: when state is merged, replaced, overridden, deleted or purged Sample: “This output will always be in the same format as the module argspec.\n” |
|
The set of commands pushed to the remote device. Returned: when state is merged, replaced, overridden, deleted or purged Sample: [“logging file test path test1 maxfilesize 1024 severity info”, “logging ipv6 dscp af11”, “logging trap critical”, “logging monitor errors”, “logging buffered errors”, “logging 1.1.1.3 vrf default severity critical port default”] |
|
Facts about the network resource gathered from the remote device as structured data. Returned: when state is gathered Sample: “This output will always be in the same format as the module argspec.\n” |
|
The device native config provided in running_config option parsed into structured data as per module argspec. Returned: when state is parsed Sample: “This output will always be in the same format as the module argspec.\n” |
|
The provided configuration in the task rendered in device-native format (offline). Returned: when state is rendered Sample: [“logging buffered errors”, “logging correlator buffer-size 1024”, “logging hostnameprefix test1”, “logging ipv6 dscp af11”, “logging localfilesize 1024”, “logging trap disable”, “logging monitor disable”, “logging history disable”, “logging console disable”] |
Authors
Ashwini Mhatre (@amhatre)