You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.iosxr.iosxr_ospf_interfaces module – OSPF Interfaces Resource Module.

Note

This module is part of the cisco.iosxr collection (version 2.9.0).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.iosxr.

To use it in a playbook, specify: cisco.iosxr.iosxr_ospf_interfaces.

New in version 1.2.0: of cisco.iosxr

Synopsis
Parameters
Notes
Examples

Synopsis 

This module manages OSPF(v2/v3) configuration of interfaces on devices running Cisco IOS-XR.

Parameters 

Parameter	Comments
config list / elements=dictionary	A list of OSPF configuration for interfaces.
address_family list / elements=dictionary	OSPF settings on the interfaces in address-family context.
afi string / required	Address Family Identifier (AFI) for OSPF settings on the interfaces. Choices: ipv4 ipv6
apply_group_option dictionary	Specify configuration from a group
group_name string	Specify the name of the group
operation string	Specify the group config operation Choices: add remove append
authentication dictionary	Enable authentication
message_digest dictionary	Use message-digest authentication
keychain string	Specify keychain name
null_auth boolean	Use no authentication Choices: no yes
authentication_key dictionary	Specify authentication password (key)
clear string	Specifies an UNENCRYPTED password (key) will follow
encrypted string	Specifies an ENCRYPTED password (key) will follow
password string	The OSPFv2 password (key)
bfd dictionary	Configure BFD parameters
fast_detect dictionary	Configure fast detection
set boolean	Enable fast detection only Choices: no yes
strict_mode boolean	Hold down neighbor session until BFD session is up Choices: no yes
minimum_interval integer	Hello interval in milli-seconds
multiplier integer	Detect multiplier
cost integer	Specify Interface cost
cost_fallback dictionary	Specify Cost when cumulative bandwidth goes below the theshold
cost integer	Specify cost w.r.t cummulative bandwidth
threshold integer	Specify threshold bandwidth when cost-fallback is applied
database_filter dictionary	Filter OSPF LSAs during synchronization and flooding
all_outgoing_lsa boolean	Filter all outgoing LSA Choices: no yes
dead_interval integer	Specify interval after which a neighbor is declared dead
demand_circuit boolean	Enable/Disable demand circuits Choices: no yes
fast_reroute dictionary	Specify IP Fast Reroute
disabled boolean	Disable IP fast reroute Choices: no yes
per_link dictionary	Specify per-prefix computation
information_type string	Specify per-link LFA exclusion or FRR LFA candidate information Choices: exclude lfa_candidate
interface dictionary	Specify Per-link LFA exclusion information
bundle_ether list / elements=dictionary	Specify Aggregated Ethernet interface(s)
name integer	Specify the interface id
bvi list / elements=dictionary	Specify Bridge-Group Virtual Interface
name integer	Specify the interface id
fast_ethernet list / elements=dictionary	Specify FastEthernet/IEEE 802.3 interface(s)
name string	Specify the interface id
fiftygige list / elements=dictionary	Specify FiftyGigE/IEEE 802.3 interface(s)
name string	Specify the interface id
fortygige list / elements=dictionary	Specify FortyGigE/IEEE 802.3 interface(s)
name string	Specify the interface id
fourhundredgige list / elements=dictionary	Specify FourHundredGigE/IEEE 802.3 interface(s)
name string	Specify the interface id
gigabitethernet list / elements=dictionary	Specify GigabitEthernet/IEEE 802.3 interface(s)
name string	Specify the interface id
hundredgige list / elements=dictionary	Specify HundredGigE/IEEE 802.3 interface(s)
name string	Specify the interface id
mgmteth list / elements=dictionary	Specify MgmtEth/IEEE 802.3 interface(s)
name string	Specify the interface id
multilink list / elements=dictionary	Specify Multilink network interface(s)
name string	Specify the interface id
nve list / elements=dictionary	Specify Network Virtualization Endpoint Interface(s)
name integer	Specify the interface id
pos_int list / elements=dictionary	Specify Aggregated pos interface(s)
name integer	Specify the interface id
pw_ether list / elements=dictionary	Specify PWHE Ethernet Interface
name integer	Specify the interface id
pw_iw list / elements=dictionary	Specify PWHE VC11 IP Interworking Interface
name integer	Specify the interface id
serial list / elements=dictionary	Specify Serial network interface(s)
name string	Specify the interface id
srp list / elements=dictionary	Specify SRP interface(s)
name string	Specify the interface id
tengige list / elements=dictionary	Specify TenGigabitEthernet/IEEE 802.3 interface(s)
name string	Specify the interface id
tunnel_ip list / elements=dictionary	Specify GRE/IPinIP Tunnel Interface(s)
name integer	Specify the interface id
tunnel_ipsec list / elements=dictionary	Specify IPSec Tunnel interface(s)
name integer	Specify the interface id
tunnel_mpls list / elements=dictionary	MPLS Transport Protocol Tunnel interface
name string	Specify the interface id
tunnel_mte list / elements=dictionary	Specify MPLS Traffic Engineering P2MP Tunnel interface(s)
name integer	Specify the interface id
twentyfivegige list / elements=dictionary	Specify TwentyFiveGigabitEthernet/IEEE 802.3 interface(s)
name string	Specify the interface id
twohundredgige list / elements=dictionary	Specify TwoHundredGigE/IEEE 802.3 interface(s)
name string	Specify the interface id
use_candidate_only boolean	Enable/Disable backup selection from candidate-list only Choices: no yes
flood_reduction boolean	Enable/Disable flood reduction Choices: no yes
hello_interval integer	Specify Time between HELLO packets
link_down_fast_detect boolean	Configure interface down parameters Choices: no yes
message_digest_key dictionary	Message digest authentication password (key)
id integer / required	Key ID
md5 dictionary / required	Use MD5 Algorithm
clear boolean	Specifies an UNENCRYPTED password (key) will follow Choices: no yes
encrypted boolean	Specifies an ENCRYPTED password (key) will follow Choices: no yes
password string	The OSPFv2 password (key)
mpls_ldp_sync boolean	Enable/Disable MPLS LDP Sync Choices: no yes
mtu_ignore boolean	Enable/Disable ignoring of MTU in DBD packets Choices: no yes
neighbors list / elements=dictionary	Specify a neighbor routers
cost integer	Specify OSPF cost for point-to-multipoint neighbor
db_filter_all_out boolean	Specify Filter OSPF LSA during synchronization and flooding for point-to-multipoint neighbor Choices: no yes
neighbor_id string	Specify Neighbor address (name)
poll_interval integer	Specify OSPF dead-router polling interval
priority integer	Specify OSPF priority of non-broadcast neighbor
network string	Specify Network type Choices: broadcast non-broadcast point-to-multipoint point-to-point
packet_size integer	Customize size of OSPF packets upto MTU
passive boolean	Enable/Disable passive Choices: no yes
prefix_suppression boolean	Suppress advertisement of the prefixes Choices: no yes
priority integer	Specify Router priority
processes list / elements=dictionary	Interfaces configuration for an OSPF process.
area dictionary	Specify the area-id
area_id string	OSPF interfaces area ID as a decimal value. Please refer vendor documentation of Valid values. OSPF interfaces area ID in IP address format(e.g. A.B.C.D)
process_id string / required	OSPF process tag.
retransmit_interval integer	Specify time between retransmitting lost link state advertisements
security_ttl dictionary	Enable security
hops integer	Maximum number of IP hops allowed <1-254>
set boolean	Enable ttl security Choices: no yes
transmit_delay integer	Specify estimated time needed to send link-state update packet
name string / required	Name/Identifier of the interface.
type string / required	Type of the interface.
running_config string	This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config router ospf’. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in. Choices: merged ← (default) replaced overridden deleted gathered parsed rendered

Notes 

Note

This module works with connection network_cli. See the IOS-XR Platform Options

Examples 

# Using merged

# Before state:
# -------------
#
# RP/0/RP0/CPU0:anton#show running-config router ospf
# % No such configuration item(s)
#

- name: Merge provided OSPF interfaces configuration with the existing configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.3
            cost: 20
            authentication:
              message_digest:
                keychain: cisco
          - afi: ipv6
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.2
            cost: 30
    state: merged

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": []
#
#  "commands": [
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 20",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain cisco",
#        "router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0 cost 30"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# ------------
# After state
# ------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:00:57.217 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !

# Using replaced
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:00:57.217 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !

- name: Replace OSPF interfaces configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.3
            cost: 30
            authentication:
              message_digest:
                keychain: ciscoiosxr
          - afi: ipv6
            processes:
              - process_id: "LAB3"
                area:
                  area_id: 0.0.0.2
            cost: 30
    state: replaced

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#  "commands": [
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 30",
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#    "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain ciscoiosxr"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "ciscoiosxr"
#                         }
#                     },
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:10:39.827 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 30
#    authentication message-digest keychain ciscoiosxr
#   !
#  !
# !
# router ospf ipv4
# !

- name: Override existing OSPF interfaces configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
              - process_id: "LAB1"
                area:
                  area_id: 0.0.0.3
            cost: 10
            authentication:
              message_digest:
                keychain: iosxr
    state: overridden

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "ciscoiosxr"
#                         }
#                     },
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
#  "commands": [
#         "no router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0",
#         "no router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 cost 10",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 authentication message-digest",
#         "router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1 authentication message-digest keychain iosxr"
#     ]
#
#  "after": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "iosxr"
#                         }
#                     },
#                     "cost": 10,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB1"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/1",
#             "type": "gigabitethernet"
#         }
#     ]
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:28:15.025 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/1
#    cost 10
#    authentication message-digest keychain iosxr
#   !
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

# Using deleted
#
# ------------
# Before state
# ------------
#
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:28:15.025 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/1
#    cost 10
#    authentication message-digest keychain iosxr
#   !
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

- name: Deleted existing OSPF interfaces from the device
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/1
        type: gigabitethernet
    state: deleted

#
#
# ------------------------
# Module Execution Result
# ------------------------
#
#  "before": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "iosxr"
#                         }
#                     },
#                     "cost": 10,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB1"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/1",
#             "type": "gigabitethernet"
#         }
#     ],
#
#  "commands": [
#         "no router ospf LAB1 area 0.0.0.3 interface GigabitEthernet 0/0/0/1"
#     ]
#
#  "after": []
#
#
# -----------
# After state
# -----------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:34:38.319 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#  !
# !
# router ospf ipv4
# !

# Using parsed
# parsed.cfg
# ------------
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !
- name: Parsed the device configuration to get output commands
  cisco.iosxr.iosxr_ospf_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "parsed": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#
# Using rendered
#
#
- name: Render the commands for provided  configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    config:
      - name: GigabitEthernet0/0/0/0
        type: gigabitethernet
        address_family:
          - afi: ipv4
            processes:
             - process_id: "LAB3"
               area:
                 area_id: 0.0.0.3
            cost: 20
            authentication:
              message_digest:
                keychain: cisco
          - afi: ipv6
            processes:
             - process_id: "LAB3"
               area:
                 area_id: 0.0.0.2
            cost: 30
    state: rendered

#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#
# "rendered": [
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 cost 20",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest",
#        "router ospf LAB3 area 0.0.0.3 interface GigabitEthernet 0/0/0/0 authentication message-digest keychain cisco",
#        "router ospfv3 LAB3 area 0.0.0.2 interface GigabitEthernet 0/0/0/0 cost 30"
#     ]


# Using gathered
#
# Before state:
# -------------
#
# RP/0/0/CPU0:an-iosxr-02#show running-config router ospf
# Thu Oct 23 06:50:38.743 UTC
# router ospf LAB
#  area 0.0.0.0
#  !
#  area 0.0.0.9
#  !
# !
# router ospf LAB1
#  area 0.0.0.1
#  !
#  area 0.0.0.3
#  !
# !
# router ospf LAB3
#  area 0.0.0.3
#   interface GigabitEthernet0/0/0/0
#    cost 20
#    authentication message-digest keychain cisco
#   !
#  !
# !
# router ospf ipv4
# !


- name: Gather ospf_interfaces routes configuration
  cisco.iosxr.iosxr_ospf_interfaces:
    state: gathered
#
#
# -------------------------
# Module Execution Result
# -------------------------
#
#    "gathered": [
#         {
#             "address_family": [
#                 {
#                     "afi": "ipv4",
#                     "authentication": {
#                         "message_digest": {
#                             "keychain": "cisco"
#                         }
#                     },
#                     "cost": 20,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.3"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 },
#                 {
#                     "afi": "ipv6",
#                     "cost": 30,
#                     "processes": [
#                         {
#                             "area": {
#                                 "area_id": "0.0.0.2"
#                             },
#                             "process_id": "LAB3"
#                         }
#                     ]
#                 }
#             ],
#             "name": "GigabitEthernet0/0/0/0",
#             "type": "gigabitethernet"
#         }
#     ]
#

Authors

Rohit Thakur (@rohitthakur2590)

Collection links

Issue Tracker Repository (Sources)

cisco.iosxr.iosxr_ospf_interfaces module – OSPF Interfaces Resource Module.

Synopsis

Parameters

Notes

Examples