cisco.iosxr.iosxr_static_routes module – Static routes resource module
Note
This module is part of the cisco.iosxr collection (version 2.9.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it, use: ansible-galaxy collection install cisco.iosxr
.
To use it in a playbook, specify: cisco.iosxr.iosxr_static_routes
.
New in version 1.0.0: of cisco.iosxr
Parameters
Parameter |
Comments |
---|---|
A dictionary of static route options. |
|
A dictionary specifying the address family to which the static route(s) belong. |
|
Specifies the top level address family indicator. Choices:
|
|
A dictionary that specifies the static route configurations. |
|
An IPv4 or IPv6 address in CIDR notation that specifies the destination network for the static route. |
|
Next hops to the specified destination. |
|
The administrative distance for this static route. Refer to vendor documentation for valid values. |
|
Specifies the description for this static route. |
|
The destination VRF. |
|
The IP address of the next hop that can be used to reach the destination network. |
|
The interface to use to reach the destination. |
|
Specifes the metric for this static route. Refer to vendor documentation for valid values. |
|
Specifies a numeric tag for this static route. Refer to vendor documentation for valid values. |
|
Specifies the object to be tracked. This enables object tracking for static routes. |
|
Specifies a tunnel id for the route. Refer to vendor documentation for valid values. |
|
Specifies the VRF label for this static route. Refer to vendor documentation for valid values. |
|
Specifies the subsequent address family indicator. Choices:
|
|
The VRF to which the static route(s) belong. |
|
This option is used only with state parsed. The value of this option should be the output received from the IOS-XR device by executing the command show running-config router static. The state parsed reads the configuration from |
|
The state the configuration should be left in. Choices:
|
Examples
# Using merged
# Before state
# -------------
# RP/0/RP0/CPU0:ios#show running-config router static
# Sat Feb 22 07:46:30.089 UTC
# % No such configuration item(s)
#
- name: Merge the provided configuration with the existing running configuration
cisco.iosxr.iosxr_static_routes:
config:
- address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.16/28
next_hops:
- forward_router_address: 192.0.2.10
interface: FastEthernet0/0/0/1
description: LAB
metric: 120
tag: 10
- interface: FastEthernet0/0/0/5
track: ip_sla_1
- dest: 192.0.2.32/28
next_hops:
- forward_router_address: 192.0.2.11
admin_distance: 100
- afi: ipv6
safi: unicast
routes:
- dest: 2001:db8:1000::/36
next_hops:
- interface: FastEthernet0/0/0/7
description: DC
- interface: FastEthernet0/0/0/8
forward_router_address: 2001:db8:2000:2::1
- vrf: DEV_SITE
address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.12
description: DEV
dest_vrf: test_1
- dest: 192.0.2.80/28
next_hops:
- interface: FastEthernet0/0/0/2
forward_router_address: 192.0.2.14
dest_vrf: test_1
track: ip_sla_2
vrflabel: 124
state: merged
# After state
# -------------
# RP/0/RP0/CPU0:ios#show running-config router static
# Sat Feb 22 07:49:11.754 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
# Using merged to update existing static routes
# Before state
# -------------
# RP/0/RP0/CPU0:ios#show running-config router static
# Sat Feb 22 07:49:11.754 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Update existing static routes configuration using merged
cisco.iosxr.iosxr_static_routes:
config:
- vrf: DEV_SITE
address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.12
vrflabel: 2301
dest_vrf: test_1
- dest: 192.0.2.80/28
next_hops:
- interface: FastEthernet0/0/0/2
forward_router_address: 192.0.2.14
dest_vrf: test_1
description: rt_test_1
state: merged
# After state
# -------------
# RP/0/RP0/CPU0:ios#show running-config router static
# Sat Feb 22 07:49:11.754 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV vrflabel 2301
# 192.0.2.80/28 vrf test_1 192.0.2.14 FastEthernet0/0/0/2 description rt_test_1 track ip_sla_2 vrflabel 124
# !
# !
# !
# Using replaced to replace all next hop entries for a single destination network
# Before state
# --------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 07:59:08.669 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.48/28 GigabitEthernet0/0/0/1 192.0.3.24 vrflabel 2302
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Replace device configurations of static routes with provided configurations
cisco.iosxr.iosxr_static_routes:
config:
- vrf: DEV_SITE
address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.15
interface: FastEthernet0/0/0/3
description: DEV_NEW
dest_vrf: dev_test_2
state: replaced
# After state
# ------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 08:04:07.085 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf dev_test_2 FastEthernet0/0/0/3 192.0.2.15 description DEV_NEW
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
# Using overridden to override all static route entries on the device
# Before state
# -------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 07:59:08.669 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.48/28 GigabitEthernet0/0/0/1 192.0.3.24 vrflabel 2302
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Overridde all static routes configuration with provided configuration
cisco.iosxr.iosxr_static_routes:
config:
- vrf: DEV_NEW
address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.15
interface: FastEthernet0/0/0/3
description: DEV1
- afi: ipv6
safi: unicast
routes:
- dest: 2001:db8:3000::/36
next_hops:
- interface: FastEthernet0/0/0/4
forward_router_address: 2001:db8:2000:2::2
description: PROD1
track: ip_sla_1
state: overridden
# After state
# -------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 08:07:41.516 UTC
# router static
# vrf DEV_NEW
# address-family ipv4 unicast
# 192.0.2.48/28 FastEthernet0/0/0/3 192.0.2.15 description DEV1
# !
# address-family ipv6 unicast
# 2001:db8:3000::/36 FastEthernet0/0/0/4 2001:db8:2000:2::2 description PROD1 track ip_sla_1
# !
# !
# !
# Using deleted to delete all destination network entries under a single AFI
# Before state
# -------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 07:59:08.669 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.48/28 GigabitEthernet0/0/0/1 192.0.3.24 vrflabel 2302
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Delete all destination network entries under a single AFI
cisco.iosxr.iosxr_static_routes:
config:
- vrf: DEV_SITE
address_families:
- afi: ipv4
safi: unicast
state: deleted
# After state
# ------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 08:16:41.464 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# !
# !
# Using deleted to remove all static route entries from the device
# Before state
# -------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 07:59:08.669 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.48/28 GigabitEthernet0/0/0/1 192.0.3.24 vrflabel 2302
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Delete static routes configuration
cisco.iosxr.iosxr_static_routes:
state: deleted
# After state
# ------------
# RP/0/RP0/CPU0:ios#sh running-config router static
# Sat Feb 22 08:50:43.038 UTC
# % No such configuration item(s)
# Using gathered to gather static route facts from the device
- name: Gather static routes facts from the device using iosxr_static_routes module
cisco.iosxr.iosxr_static_routes:
state: gathered
# Task output (redacted)
# -----------------------
# "gathered": [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "192.0.2.16/28",
# "next_hops": [
# {
# "description": "LAB",
# "forward_router_address": "192.0.2.10",
# "interface": "FastEthernet0/0/0/1",
# "metric": 120,
# "tag": 10
# },
# {
# "interface": "FastEthernet0/0/0/5",
# "track": "ip_sla_1"
# }
# ]
# },
# {
# "dest": "192.0.2.32/28",
# "next_hops": [
# {
# "admin_distance": 100,
# "forward_router_address": "192.0.2.11"
# }
# ]
# }
# ],
# "safi": "unicast"
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2001:db8:1000::/36",
# "next_hops": [
# {
# "description": "DC",
# "interface": "FastEthernet0/0/0/7"
# },
# {
# "forward_router_address": "2001:db8:2000:2::1",
# "interface": "FastEthernet0/0/0/8"
# }
# ]
# }
# ],
# "safi": "unicast"
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "192.0.2.48/28",
# "next_hops": [
# {
# "description": "DEV",
# "dest_vrf": "test_1",
# "forward_router_address": "192.0.2.12"
# },
# {
# "forward_router_address": "192.0.3.24",
# "interface": "GigabitEthernet0/0/0/1",
# "vrflabel": 2302
# }
# ]
# },
# {
# "dest": "192.0.2.80/28",
# "next_hops": [
# {
# "dest_vrf": "test_1",
# "forward_router_address": "192.0.2.14",
# "interface": "FastEthernet0/0/0/2",
# "track": "ip_sla_2",
# "vrflabel": 124
# }
# ]
# }
# ],
# "safi": "unicast"
# }
# ],
# "vrf": "DEV_SITE"
# }
# ]
# Using rendered
- name: Render platform specific commands (without connecting to the device)
cisco.iosxr.iosxr_static_routes:
config:
- vrf: DEV_SITE
address_families:
- afi: ipv4
safi: unicast
routes:
- dest: 192.0.2.48/28
next_hops:
- forward_router_address: 192.0.2.12
description: DEV
dest_vrf: test_1
- dest: 192.0.2.80/28
next_hops:
- interface: FastEthernet0/0/0/2
forward_router_address: 192.0.2.14
dest_vrf: test_1
track: ip_sla_2
vrflabel: 124
# Task Output (redacted)
# -----------------------
# "rendered": [
# "router static"s,
# "vrf DEV_SITE",
# "address-family ipv4 unicast",
# "192.0.2.48/28 vrf test_1 192.0.2.12 description DEV",
# "192.0.2.80/28 vrf test_1 192.0.2.14 FastEthernet0/0/0/2 track ip_sla_2 vrflabel 124"
# Using parsed
# parsed.cfg
# ------------
# Fri Nov 29 21:10:41.896 UTC
# router static
# address-family ipv4 unicast
# 192.0.2.16/28 FastEthernet0/0/0/1 192.0.2.10 tag 10 description LAB metric 120
# 192.0.2.16/28 FastEthernet0/0/0/5 track ip_sla_1
# 192.0.2.32/28 192.0.2.11 100
# !
# address-family ipv6 unicast
# 2001:db8:1000::/36 FastEthernet0/0/0/7 description DC
# 2001:db8:1000::/36 FastEthernet0/0/0/8 2001:db8:2000:2::1
# !
# vrf DEV_SITE
# address-family ipv4 unicast
# 192.0.2.48/28 vrf test_1 192.0.2.12 description DEV
# 192.0.2.80/28 vrf test_1 FastEthernet0/0/0/2 192.0.2.14 vrflabel 124 track ip_sla_2
# !
# !
# !
- name: Use parsed state to convert externally supplied device specific static routes
commands to structured format
cisco.iosxr.iosxr_static_routes:
running_config: "{{ lookup('file', '../../fixtures/parsed.cfg') }}"
state: parsed
# Task output (redacted)
# -----------------------
# "parsed": [
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "192.0.2.16/28",
# "next_hops": [
# {
# "description": "LAB",
# "forward_router_address": "192.0.2.10",
# "interface": "FastEthernet0/0/0/1",
# "metric": 120,
# "tag": 10
# },
# {
# "interface": "FastEthernet0/0/0/5",
# "track": "ip_sla_1"
# }
# ]
# },
# {
# "dest": "192.0.2.32/28",
# "next_hops": [
# {
# "admin_distance": 100,
# "forward_router_address": "192.0.2.11"
# }
# ]
# }
# ],
# "safi": "unicast"
# },
# {
# "afi": "ipv6",
# "routes": [
# {
# "dest": "2001:db8:1000::/36",
# "next_hops": [
# {
# "description": "DC",
# "interface": "FastEthernet0/0/0/7"
# },
# {
# "forward_router_address": "2001:db8:2000:2::1",
# "interface": "FastEthernet0/0/0/8"
# }
# ]
# }
# ],
# "safi": "unicast"
# }
# ]
# },
# {
# "address_families": [
# {
# "afi": "ipv4",
# "routes": [
# {
# "dest": "192.0.2.48/28",
# "next_hops": [
# {
# "description": "DEV",
# "dest_vrf": "test_1",
# "forward_router_address": "192.0.2.12"
# }
# ]
# },
# {
# "dest": "192.0.2.80/28",
# "next_hops": [
# {
# "dest_vrf": "test_1",
# "forward_router_address": "192.0.2.14",
# "interface": "FastEthernet0/0/0/2",
# "track": "ip_sla_2",
# "vrflabel": 124
# }
# ]
# }
# ],
# "safi": "unicast"
# }
# ],
# "vrf": "DEV_SITE"
# }
# ]
# }
Return Values
Common return values are documented here, the following are the fields unique to this module:
Key |
Description |
---|---|
The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n” |
|
The set of commands pushed to the remote device. Returned: always Sample: [“router static”, “vrf dev_site”, “address-family ipv4 unicast”, “192.0.2.48/28 192.0.2.12 FastEthernet0/0/0/1 track ip_sla_10 description dev1”, “address-family ipv6 unicast”, “no 2001:db8:1000::/36”, “2001:db8:3000::/36 2001:db8:2000:2::2 FastEthernet0/0/0/4 track ip_sla_11 description prod1”] |
Authors
Nilashish Chakraborty (@NilashishC)