You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.ise.device_administration_authentication_rules module – Resource module for Device Administration Authentication Rules

Note

This module is part of the cisco.ise collection (version 1.2.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.ise.

To use it in a playbook, specify: cisco.ise.device_administration_authentication_rules.

New in version 1.0.0: of cisco.ise

Synopsis
Requirements
Parameters
Notes
See Also
Examples
Return Values

Synopsis 

Manage operations create, update and delete of the resource Device Administration Authentication Rules.

Note

This module has a corresponding action plugin.

Requirements 

The below requirements are needed on the host that executes this module.

ciscoisesdk >= 1.1.0
python >= 3.5

Parameters 

Parameter	Comments
id string	Id path parameter. Rule id.
identitySourceId string	Identity source id from the identity stores.
identitySourceName string	Identity source name from the identity stores.
ifAuthFail string	Action to perform when authentication fails such as Bad credentials, disabled user and so on.
ifProcessFail string	Action to perform when ISE is uanble to access the identity database.
ifUserNotFound string	Action to perform when user is not found in any of identity stores.
ise_debug boolean	Flag for Identity Services Engine SDK to enable debugging. Choices: no ← (default) yes
ise_hostname string / required	The Identity Services Engine hostname.
ise_password string / required	The Identity Services Engine password to authenticate.
ise_username string / required	The Identity Services Engine username to authenticate.
ise_uses_api_gateway boolean added in 1.1.0 of cisco.ise	Flag that informs the SDK whether to use the Identity Services Engine’s API Gateway to send requests. If it is true, it uses the ISE’s API Gateway and sends requests to https://{{ise_hostname}}. If it is false, it sends the requests to https://{{ise_hostname}}:{{port}}, where the port value depends on the Service used (ERS, Mnt, UI, PxGrid). Choices: no yes ← (default)
ise_verify boolean	Flag to enable or disable SSL certificate verification. Choices: no yes ← (default)
ise_version string	Informs the SDK which version of Identity Services Engine to use. Default: “3.1.0”
ise_wait_on_rate_limit boolean	Flag for Identity Services Engine SDK to enable automatic rate-limit handling. Choices: no yes ← (default)
link dictionary	Device Administration Authentication Rules’s link.
href string	Device Administration Authentication Rules’s href.
rel string	Device Administration Authentication Rules’s rel.
type string	Device Administration Authentication Rules’s type.
policyId string	PolicyId path parameter. Policy id.
rule dictionary	Common attributes in rule authentication/authorization.
condition dictionary	Device Administration Authentication Rules’s condition.
attributeId string	Dictionary attribute id (Optional), used for additional verification.
attributeName string	Dictionary attribute name.
attributeValue string	<ul><li>Attribute value for condition</li> <li>Value type is specified in dictionary object</li> <li>if multiple values allowed is specified in dictionary object</li></ul>.
children list / elements=string	In case type is andBlock or orBlock addtional conditions will be aggregated under this logical (OR/AND) condition.
conditionType string	<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>.
isNegate boolean	Indicates whereas this condition is in negate mode. Choices: no yes
link dictionary	Device Administration Authentication Rules’s link.
href string	Device Administration Authentication Rules’s href.
rel string	Device Administration Authentication Rules’s rel.
type string	Device Administration Authentication Rules’s type.
conditionType string	<ul><li>Inidicates whether the record is the condition itself(data) or a logical(or,and) aggregation</li> <li>Data type enum(reference,single) indicates than “conditonId” OR “ConditionAttrs” fields should contain condition data but not both</li> <li>Logical aggreation(and,or) enum indicates that additional conditions are present under the children field</li></ul>.
datesRange dictionary	<p>Defines for which date/s TimeAndDate condition will be matched or NOT matched if used in exceptionDates prooperty<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>.
endDate string	Device Administration Authentication Rules’s endDate.
startDate string	Device Administration Authentication Rules’s startDate.
datesRangeException dictionary	<p>Defines for which date/s TimeAndDate condition will be matched or NOT matched if used in exceptionDates prooperty<br> Options are - Date range, for specific date, the same date should be used for start/end date <br> Default - no specific dates<br> In order to reset the dates to have no specific dates Date format - yyyy-mm-dd (MM = month, dd = day, yyyy = year)</p>.
endDate string	Device Administration Authentication Rules’s endDate.
startDate string	Device Administration Authentication Rules’s startDate.
description string	Condition description.
dictionaryName string	Dictionary name.
dictionaryValue string	Dictionary value.
hoursRange dictionary	<p>Defines for which hours a TimeAndDate condition will be matched or not matched if used in exceptionHours property<br> Time foramt - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>.
endTime string	Device Administration Authentication Rules’s endTime.
startTime string	Device Administration Authentication Rules’s startTime.
hoursRangeException dictionary	<p>Defines for which hours a TimeAndDate condition will be matched or not matched if used in exceptionHours property<br> Time foramt - hh mm ( h = hour , mm = minutes ) <br> Default - All Day </p>.
endTime string	Device Administration Authentication Rules’s endTime.
startTime string	Device Administration Authentication Rules’s startTime.
id string	Device Administration Authentication Rules’s id.
isNegate boolean	Indicates whereas this condition is in negate mode. Choices: no yes
link dictionary	Device Administration Authentication Rules’s link.
href string	Device Administration Authentication Rules’s href.
rel string	Device Administration Authentication Rules’s rel.
type string	Device Administration Authentication Rules’s type.
name string	Condition name.
operator string	Equality operator.
weekDays list / elements=string	<p>Defines for which days this condition will be matched<br> Days format - Arrays of WeekDay enums <br> Default - List of All week days</p>.
weekDaysException list / elements=string	<p>Defines for which days this condition will NOT be matched<br> Days format - Arrays of WeekDay enums <br> Default - Not enabled</p>.
default boolean	Indicates if this rule is the default one. Choices: no yes
hitCounts integer	The amount of times the rule was matched.
id string	The identifier of the rule.
name string	Rule name, Valid characters are alphanumerics, underscore, hyphen, space, period, parentheses.
rank integer	The rank(priority) in relation to other rules. Lower rank is higher priority.
state string	The state that the rule is in. A disabled rule cannot be matched.

Notes 

Note

Does not support check_mode

Examples 

- name: Create
  cisco.ise.device_administration_authentication_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    identitySourceId: string
    identitySourceName: string
    ifAuthFail: string
    ifProcessFail: string
    ifUserNotFound: string
    link:
      href: string
      rel: string
      type: string
    rule:
      condition:
        attributeId: string
        attributeName: string
        attributeValue: string
        children:
        - conditionType: string
          isNegate: true
          link:
            href: string
            rel: string
            type: string
        conditionType: string
        datesRange:
          endDate: string
          startDate: string
        datesRangeException:
          endDate: string
          startDate: string
        description: string
        dictionaryName: string
        dictionaryValue: string
        hoursRange:
          endTime: string
          startTime: string
        hoursRangeException:
          endTime: string
          startTime: string
        id: string
        isNegate: true
        link:
          href: string
          rel: string
          type: string
        name: string
        operator: string
        weekDays:
        - string
        weekDaysException:
        - string
      default: true
      hitCounts: 0
      id: string
      name: string
      rank: 0
      state: string

- name: Update by id
  cisco.ise.device_administration_authentication_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: present
    id: string
    identitySourceId: string
    identitySourceName: string
    ifAuthFail: string
    ifProcessFail: string
    ifUserNotFound: string
    link:
      href: string
      rel: string
      type: string
    policyId: string
    rule:
      condition:
        attributeId: string
        attributeName: string
        attributeValue: string
        children:
        - conditionType: string
          isNegate: true
          link:
            href: string
            rel: string
            type: string
        conditionType: string
        datesRange:
          endDate: string
          startDate: string
        datesRangeException:
          endDate: string
          startDate: string
        description: string
        dictionaryName: string
        dictionaryValue: string
        hoursRange:
          endTime: string
          startTime: string
        hoursRangeException:
          endTime: string
          startTime: string
        id: string
        isNegate: true
        link:
          href: string
          rel: string
          type: string
        name: string
        operator: string
        weekDays:
        - string
        weekDaysException:
        - string
      default: true
      hitCounts: 0
      id: string
      name: string
      rank: 0
      state: string

- name: Delete by id
  cisco.ise.device_administration_authentication_rules:
    ise_hostname: "{{ise_hostname}}"
    ise_username: "{{ise_username}}"
    ise_password: "{{ise_password}}"
    ise_verify: "{{ise_verify}}"
    state: absent
    id: string
    policyId: string

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key

Description

ise_response

dictionary

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”identitySourceId\”: \”string\”,\n \”identitySourceName\”: \”string\”,\n \”ifAuthFail\”: \”string\”,\n \”ifProcessFail\”: \”string\”,\n \”ifUserNotFound\”: \”string\”,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”rule\”: {\n \”condition\”: {\n \”conditionType\”: \”string\”,\n \”isNegate\”: true,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”name\”: \”string\”,\n \”attributeName\”: \”string\”,\n \”attributeId\”: \”string\”,\n \”attributeValue\”: \”string\”,\n \”dictionaryName\”: \”string\”,\n \”dictionaryValue\”: \”string\”,\n \”operator\”: \”string\”,\n \”children\”: [\n {\n \”conditionType\”: \”string\”,\n \”isNegate\”: true,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n }\n }\n ],\n \”datesRange\”: {\n \”endDate\”: \”string\”,\n \”startDate\”: \”string\”\n },\n \”datesRangeException\”: {\n \”endDate\”: \”string\”,\n \”startDate\”: \”string\”\n },\n \”hoursRange\”: {\n \”endTime\”: \”string\”,\n \”startTime\”: \”string\”\n },\n \”hoursRangeException\”: {\n \”endTime\”: \”string\”,\n \”startTime\”: \”string\”\n },\n \”weekDays\”: [\n \”string\”\n ],\n \”weekDaysException\”: [\n \”string\”\n ]\n },\n \”default\”: true,\n \”hitCounts\”: 0,\n \”id\”: \”string\”,\n \”name\”: \”string\”,\n \”rank\”: 0,\n \”state\”: \”string\”\n }\n}\n”

ise_update_response

dictionary

added in 1.1.0 of cisco.ise

A dictionary or list with the response returned by the Cisco ISE Python SDK

Returned: always

Sample: “{\n \”response\”: {\n \”identitySourceId\”: \”string\”,\n \”identitySourceName\”: \”string\”,\n \”ifAuthFail\”: \”string\”,\n \”ifProcessFail\”: \”string\”,\n \”ifUserNotFound\”: \”string\”,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”rule\”: {\n \”condition\”: {\n \”conditionType\”: \”string\”,\n \”isNegate\”: true,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n },\n \”description\”: \”string\”,\n \”id\”: \”string\”,\n \”name\”: \”string\”,\n \”attributeName\”: \”string\”,\n \”attributeId\”: \”string\”,\n \”attributeValue\”: \”string\”,\n \”dictionaryName\”: \”string\”,\n \”dictionaryValue\”: \”string\”,\n \”operator\”: \”string\”,\n \”children\”: [\n {\n \”conditionType\”: \”string\”,\n \”isNegate\”: true,\n \”link\”: {\n \”href\”: \”string\”,\n \”rel\”: \”string\”,\n \”type\”: \”string\”\n }\n }\n ],\n \”datesRange\”: {\n \”endDate\”: \”string\”,\n \”startDate\”: \”string\”\n },\n \”datesRangeException\”: {\n \”endDate\”: \”string\”,\n \”startDate\”: \”string\”\n },\n \”hoursRange\”: {\n \”endTime\”: \”string\”,\n \”startTime\”: \”string\”\n },\n \”hoursRangeException\”: {\n \”endTime\”: \”string\”,\n \”startTime\”: \”string\”\n },\n \”weekDays\”: [\n \”string\”\n ],\n \”weekDaysException\”: [\n \”string\”\n ]\n },\n \”default\”: true,\n \”hitCounts\”: 0,\n \”id\”: \”string\”,\n \”name\”: \”string\”,\n \”rank\”: 0,\n \”state\”: \”string\”\n }\n },\n \”version\”: \”string\”\n}\n”

Authors

Rafael Campos (@racampos)

Collection links

Issue Tracker Repository (Sources)

cisco.ise.device_administration_authentication_rules module – Resource module for Device Administration Authentication Rules

Synopsis

Requirements

Parameters

Notes

See Also

Examples

Return Values

Authors

Collection links

Synopsis 

Requirements 

Parameters 

Notes 

See Also 

Examples 

Return Values 