You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.nxos.nxos_acl_interfaces module – ACL interfaces resource module

Note

This module is part of the cisco.nxos collection (version 2.9.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_acl_interfaces.

New in version 1.0.0: of cisco.nxos

Synopsis
Parameters
Notes
Examples
Return Values

Synopsis 

Add and remove Access Control Lists on interfaces in NX-OS platform

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
config list / elements=dictionary	A list of interfaces to be configured with ACLs
access_groups list / elements=dictionary	List of address family indicators with ACLs to be configured on the interface
acls list / elements=dictionary	List of Access Control Lists for the interface
direction string / required	Direction to be applied for the ACL Choices: in out
name string / required	Name of the ACL to be added/removed
port boolean	Use ACL as port policy. Choices: no yes
afi string / required	Address Family Indicator of the ACLs to be configured Choices: ipv4 ipv6
name string / required	Name of the interface
running_config string	This option is used only with state parsed. The value of this option should be the output received from the NX-OS device by executing the command show running-config \| section ‘^interface’. The state parsed reads the configuration from `running_config` option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.
state string	The state the configuration should be left in Choices: deleted gathered merged ← (default) overridden rendered replaced parsed

Notes 

Note

Tested against NX-OS 7.3.(0)D1(1) on VIRL
Unsupported for Cisco MDS

Examples 

# Using merged

# Before state:
# ------------
#

- name: Merge ACL interfaces configuration
  cisco.nxos.nxos_acl_interfaces:
    config:
    - name: Ethernet1/2
      access_groups:
      - afi: ipv6
        acls:
        - name: ACL1v6
          direction: in

    - name: Eth1/5
      access_groups:
      - afi: ipv4
        acls:
        - name: PortACL
          direction: in
          port: true

        - name: ACL1v4
          direction: out

      - afi: ipv6
        acls:
        - name: ACL1v6
          direction: in
    state: merged

# After state:
# ------------
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ip port access-group PortACL in
#   ip access-group ACL1v4 out
#   ipv6 traffic-filter ACL1v6 in

# Using replaced

# Before state:
# ------------
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ip port access-group PortACL in
#   ip access-group ACL1v4 out
#   ipv6 traffic-filter ACL1v6 in

- name: Replace interface configuration with given configuration
  cisco.nxos.nxos_acl_interfaces:
    config:
    - name: Eth1/5
      access_groups:
      - afi: ipv4
        acls:
        - name: NewACLv4
          direction: out

    - name: Ethernet1/3
      access_groups:
      - afi: ipv6
        acls:
        - name: NewACLv6
          direction: in
          port: true
    state: replaced

# After state:
# ------------
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/3
#   ipv6 port traffic-filter NewACLv6 in
# interface Ethernet1/5
#   ip access-group NewACLv4 out

# Using overridden

# Before state:
# ------------
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ip port access-group PortACL in
#   ip access-group ACL1v4 out
#   ipv6 traffic-filter ACL1v6 in

- name: Override interface configuration with given configuration
  cisco.nxos.nxos_acl_interfaces:
    config:
    - name: Ethernet1/3
      access_groups:
      - afi: ipv4
        acls:
        - name: ACL1v4
          direction: out

        - name: PortACL
          port: true
          direction: in
      - afi: ipv6
        acls:
        - name: NewACLv6
          direction: in
          port: true
    state: overridden

# After state:
# ------------
# interface Ethernet1/3
#   ip access-group ACL1v4 out
#   ip port access-group PortACL in
#   ipv6 port traffic-filter NewACLv6 in

# Using deleted to remove ACL config from specified interfaces

# Before state:
# -------------
# interface Ethernet1/1
#   ip access-group ACL2v4 in
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ip port access-group PortACL in
#   ip access-group ACL1v4 out
#   ipv6 traffic-filter ACL1v6 in

- name: Delete ACL configuration on interfaces
  cisco.nxos.nxos_acl_interfaces:
    config:
    - name: Ethernet1/5
    - name: Ethernet1/2
    state: deleted

# After state:
# -------------
# interface Ethernet1/1
#   ip access-group ACL2v4 in
# interface Ethernet1/2
# interface Ethernet1/5

# Using deleted to remove ACL config from all interfaces

# Before state:
# -------------
# interface Ethernet1/1
#   ip access-group ACL2v4 in
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ip port access-group PortACL in
#   ip access-group ACL1v4 out
#   ipv6 traffic-filter ACL1v6 in

- name: Delete ACL configuration from all interfaces
  cisco.nxos.nxos_acl_interfaces:
    state: deleted

# After state:
# -------------
# interface Ethernet1/1
# interface Ethernet1/2
# interface Ethernet1/5

# Using parsed

- name: Parse given configuration into structured format
  cisco.nxos.nxos_acl_interfaces:
    running_config: |
      interface Ethernet1/2
      ipv6 traffic-filter ACL1v6 in
      interface Ethernet1/5
      ipv6 traffic-filter ACL1v6 in
      ip access-group ACL1v4 out
      ip port access-group PortACL in
    state: parsed

# returns
# parsed:
#   - name: Ethernet1/2
#     access_groups:
#       - afi: ipv6
#         acls:
#           - name: ACL1v6
#             direction: in
#  - name: Ethernet1/5
#    access_groups:
#      - afi: ipv4
#        acls:
#          - name: PortACL
#            direction: in
#            port: True
#          - name: ACL1v4
#            direction: out
#      - afi: ipv6
#        acls:
#          - name: ACL1v6
#             direction: in


# Using gathered:

# Before state:
# ------------
# interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
# interface Ethernet1/5
#   ipv6 traffic-filter ACL1v6 in
#   ip access-group ACL1v4 out
#   ip port access-group PortACL in

- name: Gather existing configuration from device
  cisco.nxos.nxos_acl_interfaces:
    config:
    state: gathered

# returns
# gathered:
#   - name: Ethernet1/2
#     access_groups:
#       - afi: ipv6
#         acls:
#           - name: ACL1v6
#             direction: in
#  - name: Ethernet1/5
#    access_groups:
#      - afi: ipv4
#        acls:
#          - name: PortACL
#            direction: in
#            port: True
#          - name: ACL1v4
#            direction: out
#      - afi: ipv6
#        acls:
#          - name: ACL1v6
#             direction: in


# Using rendered

- name: Render required configuration to be pushed to the device
  cisco.nxos.nxos_acl_interfaces:
    config:
    - name: Ethernet1/2
      access_groups:
      - afi: ipv6
        acls:
        - name: ACL1v6
          direction: in

    - name: Ethernet1/5
      access_groups:
      - afi: ipv4
        acls:
        - name: PortACL
          direction: in
          port: true
        - name: ACL1v4
          direction: out
      - afi: ipv6
        acls:
        - name: ACL1v6
          direction: in
    state: rendered

# returns
# rendered:
#   interface Ethernet1/2
#   ipv6 traffic-filter ACL1v6 in
#   interface Ethernet1/5
#   ipv6 traffic-filter ACL1v6 in
#   ip access-group ACL1v4 out
#   ip port access-group PortACL in

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after dictionary	The resulting configuration model invocation. Returned: when changed Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
before dictionary	The configuration prior to the model invocation. Returned: always Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: [“interface Ethernet1/2”, “ipv6 traffic-filter ACL1v6 out”, “ip port access-group PortACL in”]

Authors

Adharsh Srivats Rangarajan (@adharshsrivatsr)

Collection links

Issue Tracker Repository (Sources)

cisco.nxos.nxos_acl_interfaces module – ACL interfaces resource module

Synopsis

Parameters

Notes

Examples

Return Values

Authors

Collection links

Synopsis 

Parameters 

Notes 

Examples 

Return Values 