cisco.nxos.nxos_bfd_interfaces module – BFD interfaces resource module

Note

This module is part of the cisco.nxos collection (version 2.9.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_bfd_interfaces.

New in version 1.0.0: of cisco.nxos

Synopsis

  • Manages attributes of Bidirectional Forwarding Detection (BFD) on the interface.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

The provided configuration

bfd

string

Enable/Disable Bidirectional Forwarding Detection (BFD) on the interface.

Choices:

  • enable

  • disable

echo

string

Enable/Disable BFD Echo functionality on the interface.

Choices:

  • enable

  • disable

name

string

The name of the interface.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^interface|^feature bfd’.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state of the configuration after module completion

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • gathered

  • rendered

  • parsed

Notes

Note

  • Tested against NX-OS 7.0(3)I5(1).

  • Unsupported for Cisco MDS

  • Feature bfd should be enabled for this module.

Examples

# Using deleted

- name: Configure interfaces
  cisco.nxos.nxos_bfd_interfaces:
    state: deleted


# Using merged

- name: Configure interfaces
  cisco.nxos.nxos_bfd_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
      echo: enable
    - name: Ethernet1/2
      bfd: disable
      echo: disable
    state: merged


# Using overridden

- name: Configure interfaces
  cisco.nxos.nxos_bfd_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
      echo: enable
    - name: Ethernet1/2
      bfd: disable
      echo: disable
    state: overridden


# Using replaced

- name: Configure interfaces
  cisco.nxos.nxos_bfd_interfaces:
    config:
    - name: Ethernet1/1
      bfd: enable
      echo: enable
    - name: Ethernet1/2
      bfd: disable
      echo: disable
    state: replaced

# Using rendered

- name: Use rendered state to convert task input to device specific commands
  cisco.nxos.nxos_bfd_interfaces:
    config:
    - name: Ethernet1/800
      bfd: enable
      echo: enable
    - name: Ethernet1/801
      bfd: disable
      echo: disable
    state: rendered

# Task Output (redacted)
# -----------------------

# rendered:
#   - "interface Ethernet1/800"
#   - "bfd"
#   - "bfd echo"
#   - "interface Ethernet1/801"
#   - "no bfd"
#   - "no bfd echo"

# Using parsed

# parsed.cfg
# ------------

# feature bfd
# interface Ethernet1/800
#   no switchport
#   no bfd
#   no bfd echo
# interface Ethernet1/801
#   no switchport
#   no bfd
# interface Ethernet1/802
#   no switchport
#   no bfd echo
# interface mgmt0
#   ip address dhcp
#   vrf member management

- name: Use parsed state to convert externally supplied config to structured format
  cisco.nxos.nxos_bfd_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------

# parsed:
#   - bfd: disable
#     echo: disable
#     name: Ethernet1/800
#   - bfd: disable
#     echo: enable
#     name: Ethernet1/801
#   - bfd: enable
#     echo: disable
#     name: Ethernet1/802
#   - bfd: enable
#     echo: enable
#     name: mgmt0

# Using gathered

# Existing device config state
# -------------------------------

# feature bfd
# interface Ethernet1/1
#   no switchport
#   no bfd
# interface Ethernet1/2
#   no switchport
#   no bfd echo
# interface mgmt0
#   ip address dhcp
#   vrf member management

- name: Gather bfd_interfaces facts from the device using nxos_bfd_interfaces
  cisco.nxos.nxos_bfd_interfaces:
    state: gathered

# Task output (redacted)
# -----------------------
# gathered:
# - name: Ethernet1/1
#   bfd: disable
#   echo: enable
# - name: Ethernet1/3
#   echo: disable
#   bfd: enable
# - name: mgmt0
#   bfd: enable
#   echo: enable

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

list / elements=string

The configuration as structured data after module completion.

Returned: when changed

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

before

list / elements=string

The configuration as structured data prior to module invocation.

Returned: always

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“interface Ethernet1/1”, “no bfd”, “no bfd echo”]

Authors

  • Chris Van Heuveln (@chrisvanheuveln)