You are reading an unmaintained version of the Ansible documentation. Unmaintained Ansible versions can contain unfixed security vulnerabilities (CVE). Please upgrade to a maintained version. See the latest Ansible documentation.

cisco.nxos.nxos_l2_interface module – (deprecated, removed after 2022-06-01) Manage Layer-2 interface on Cisco NXOS devices.

Note

This module is part of the cisco.nxos collection (version 2.9.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_l2_interface.

New in version 1.0.0: of cisco.nxos

DEPRECATED
Synopsis
Parameters
Notes
Examples
Return Values
Status

DEPRECATED 

Removed in: major release after 2022-06-01
Why: Updated modules released with more functionality
Alternative: nxos_l2_interfaces

Synopsis 

This module provides declarative management of Layer-2 interface on Cisco NXOS devices.

Note

This module has a corresponding action plugin.

Parameters 

Parameter	Comments
access_vlan string	Configure given VLAN in access port. If `mode=access`, used as the access VLAN ID.
aggregate list / elements=dictionary	List of Layer-2 interface definitions.
access_vlan string	Configure given VLAN in access port. If `mode=access`, used as the access VLAN ID.
mode string	Mode in which interface needs to be configured. Choices: access trunk
name aliases: interface string	Full name of the interface excluding any logical unit number, i.e. Ethernet1/1.
native_vlan string	Native VLAN to be configured in trunk port. If `mode=trunk`, used as the trunk native VLAN ID.
state string	Manage the state of the Layer-2 Interface configuration. Choices: present absent unconfigured
trunk_allowed_vlans string	List of allowed VLANs in a given trunk port. If `mode=trunk`, these are the only VLANs that will be configured on the trunk, i.e. “2-10,15”.
trunk_vlans aliases: trunk_add_vlans string	List of VLANs to be configured in trunk port. If `mode=trunk`, used as the VLAN range to ADD or REMOVE from the trunk.
mode string	Mode in which interface needs to be configured. Choices: access trunk
name aliases: interface string	Full name of the interface excluding any logical unit number, i.e. Ethernet1/1.
native_vlan string	Native VLAN to be configured in trunk port. If `mode=trunk`, used as the trunk native VLAN ID.
provider dictionary	Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. Starting with Ansible 2.6 we recommend using `connection: httpapi` for NX-API. This option will be removed in a release after 2022-06-01. For more information please see the https://docs.ansible.com/ansible/latest/network/user_guide/platform_nxos.html. A dict object containing connection details.
auth_pass string	Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
authorize boolean	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead. Choices: no ← (default) yes
host string	Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password string	Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
port integer	Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
ssh_keyfile string	Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
timeout integer	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
transport string	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi. Choices: cli ← (default) nxapi
use_proxy boolean	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored. Choices: no yes ← (default)
use_ssl boolean	Configures the transport to use SSL if set to `yes` only when the `transport=nxapi`, otherwise this value is ignored. Choices: no ← (default) yes
username string	Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
validate_certs boolean	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored. Choices: no ← (default) yes
state string	Manage the state of the Layer-2 Interface configuration. Choices: present ← (default) absent unconfigured
trunk_allowed_vlans string	List of allowed VLANs in a given trunk port. If `mode=trunk`, these are the only VLANs that will be configured on the trunk, i.e. “2-10,15”.
trunk_vlans aliases: trunk_add_vlans string	List of VLANs to be configured in trunk port. If `mode=trunk`, used as the VLAN range to ADD or REMOVE from the trunk.

Notes 

Note

Tested against NXOSv 7.0(3)I5(1).
Unsupported for Cisco MDS
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples 

- name: Ensure Eth1/5 is in its default l2 interface state
  cisco.nxos.nxos_l2_interface:
    name: Ethernet1/5
    state: unconfigured

- name: Ensure Eth1/5 is configured for access vlan 20
  cisco.nxos.nxos_l2_interface:
    name: Ethernet1/5
    mode: access
    access_vlan: 20

- name: Ensure Eth1/5 only has vlans 5-10 as trunk vlans
  cisco.nxos.nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 5-10

- name: Ensure eth1/5 is a trunk port and ensure 2-50 are being tagged (doesn't mean
    others aren't also being tagged)
  cisco.nxos.nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    native_vlan: 10
    trunk_vlans: 2-50

- name: Ensure these VLANs are not being tagged on the trunk
  cisco.nxos.nxos_l2_interface:
    name: Ethernet1/5
    mode: trunk
    trunk_vlans: 51-4094
    state: absent

- name: Aggregate Configure interfaces for access_vlan with aggregate
  cisco.nxos.nxos_l2_interface:
    aggregate:
    - {name: Ethernet1/2, access_vlan: 6}
    - {name: Ethernet1/7, access_vlan: 15}
    mode: access

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
commands list / elements=string	The list of configuration mode commands to send to the device Returned: always, except for the platforms that use Netconf transport to manage the device. Sample: [“interface eth1/5”, “switchport access vlan 20”]

Status 

This module will be removed in a major release after 2022-06-01. [deprecated]
For more information see DEPRECATED.

Authors

Trishna Guha (@trishnaguha)

Collection links

Issue Tracker Repository (Sources)

cisco.nxos.nxos_l2_interface module – (deprecated, removed after 2022-06-01) Manage Layer-2 interface on Cisco NXOS devices.

DEPRECATED

Synopsis

Parameters

Notes

Examples

Return Values

Status

Authors

Collection links

DEPRECATED 

Synopsis 

Parameters 

Notes 

Examples 

Return Values 

Status 