cisco.nxos.nxos_route_maps module – Route Maps resource module.

Note

This module is part of the cisco.nxos collection (version 2.9.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install cisco.nxos.

To use it in a playbook, specify: cisco.nxos.nxos_route_maps.

New in version 2.2.0: of cisco.nxos

Synopsis

  • This module manages route maps configuration on devices running Cisco NX-OS.

Note

This module has a corresponding action plugin.

Parameters

Parameter

Comments

config

list / elements=dictionary

A list of route-map configuration.

entries

list / elements=dictionary

List of entries (identified by sequence number) for this route-map.

action

string

Route map denies or permits set operations.

Choices:

  • deny

  • permit

continue_sequence

integer

Continue on a different entry within the route-map.

description

string

Description of the route-map.

match

dictionary

Match values from routing table.

as_number

dictionary

Match BGP peer AS number.

as_path_list

list / elements=string

AS path access list name.

asn

list / elements=string

AS number.

as_path

list / elements=string

Match BGP AS path access-list.

community

dictionary

Match BGP community list.

community_list

list / elements=string

Community list.

exact_match

boolean

Do exact matching of communities.

Choices:

  • no

  • yes

evpn

dictionary

Match BGP EVPN Routes.

route_types

list / elements=string

Match route type for evpn route.

extcommunity

dictionary

Match BGP community list.

exact_match

boolean

Do exact matching of extended communities.

Choices:

  • no

  • yes

extcommunity_list

list / elements=string

Extended Community list.

interfaces

list / elements=string

Match first hop interface of route.

ip

dictionary

Configure IP specific information.

address

dictionary

Match address of route or match packet.

access_list

string

IP access-list name (for use in route-maps for PBR only).

prefix_lists

list / elements=string

Match entries of prefix-lists.

multicast

dictionary

Match multicast attributes.

group

dictionary

Multicast Group prefix.

Mutually exclusive with group_range.

prefix

string

IPv4 group prefix.

group_range

dictionary

Multicast Group address range.

Mutually exclusive with group.

first

string

First Group address.

last

string

Last Group address.

rp

dictionary

Rendezvous point.

prefix

string

IPv4 rendezvous prefix.

rp_type

string

Multicast rendezvous point type.

Choices:

  • ASM

  • Bidir

source

string

Multicast source address.

next_hop

dictionary

Match next-hop address of route.

prefix_lists

list / elements=string

Match entries of prefix-lists.

route_source

dictionary

Match advertising source address of route.

prefix_lists

list / elements=string

Match entries of prefix-lists.

ipv6

dictionary

Configure IPv6 specific information.

address

dictionary

Match address of route or match packet.

access_list

string

IP access-list name (for use in route-maps for PBR only).

prefix_lists

list / elements=string

Match entries of prefix-lists.

multicast

dictionary

Match multicast attributes.

group

dictionary

Multicast Group prefix.

Mutually exclusive with group_range.

prefix

string

IPv4 group prefix.

group_range

dictionary

Multicast Group address range.

Mutually exclusive with group.

first

string

First Group address.

last

string

Last Group address.

rp

dictionary

Rendezvous point.

prefix

string

IPv4 rendezvous prefix.

rp_type

string

Multicast rendezvous point type.

Choices:

  • ASM

  • Bidir

source

string

Multicast source address.

next_hop

dictionary

Match next-hop address of route.

prefix_lists

list / elements=string

Match entries of prefix-lists.

route_source

dictionary

Match advertising source address of route.

prefix_lists

list / elements=string

Match entries of prefix-lists.

mac_list

list / elements=string

Match entries of mac-lists.

metric

list / elements=integer

Match metric of route.

ospf_area

list / elements=integer

Match ospf area.

route_types

list / elements=string

Match route-type of route.

Choices:

  • external

  • inter-area

  • internal

  • intra-area

  • level-1

  • level-2

  • local

  • nssa-external

  • type-1

  • type-2

source_protocol

list / elements=string

Match source protocol.

tags

list / elements=integer

Match tag of route.

sequence

integer

Sequence to insert to/delete from existing route-map entry.

set

dictionary

Set values in destination routing protocol.

as_path

dictionary

Prepend string for a BGP AS-path attribute.

prepend

dictionary

Prepend to the AS-Path.

as_number

list / elements=string

AS number.

last_as

integer

Number of last-AS prepends.

tag

boolean

Set the tag as an AS-path attribute.

Choices:

  • no

  • yes

comm_list

string

Set BGP community list (for deletion).

community

dictionary

Set BGP community attribute.

additive

boolean

Add to existing community.

Choices:

  • no

  • yes

graceful_shutdown

boolean

Graceful Shutdown (well-known community).

Choices:

  • no

  • yes

internet

boolean

Internet (well-known community).

Choices:

  • no

  • yes

local_as

boolean

Do not send outside local AS (well-known community).

Choices:

  • no

  • yes

no_advertise

boolean

Do not advertise to any peer (well-known community).

Choices:

  • no

  • yes

no_export

boolean

Do not export to next AS (well-known community).

Choices:

  • no

  • yes

number

list / elements=string

Community number aa:nn format

dampening

dictionary

Set BGP route flap dampening parameters.

half_life

integer

Half-life time for the penalty.

max_suppress_time

integer

Maximum suppress time for stable route.

start_reuse_route

integer

Value to start reusing a route.

start_suppress_route

integer

Value to start suppressing a route.

distance

dictionary

Configure administrative distance.

igp_ebgp_routes

integer

Administrative distance for IGP or EBGP routes

internal_routes

integer

Distance for internal routes.

local_routes

integer

Distance for local routes.

evpn

dictionary

Set BGP EVPN Routes.

gateway_ip

dictionary

Set gateway IP for type 5 EVPN routes.

Cannot set ip and use-nexthop in the same route-map sequence.

ip

string

Gateway IP address.

use_nexthop

boolean

Use nexthop address as gateway IP.

Choices:

  • no

  • yes

extcomm_list

string

Set BGP extcommunity list (for deletion).

forwarding_address

boolean

Set the forwarding address.

Choices:

  • no

  • yes

ip

dictionary

Configure IP features.

address

dictionary

Specify IP address.

prefix_list

string

Name of prefix list (Max Size 63).

precedence

string

Set precedence field.

ipv6

dictionary

Configure IPv6 features.

address

dictionary

Specify IP address.

prefix_list

string

Name of prefix list (Max Size 63).

precedence

string

Set precedence field.

label_index

integer

Set Segment Routing (SR) label index of route.

level

string

Where to import route.

Choices:

  • level-1

  • level-1-2

  • level-2

local_preference

integer

BGP local preference path attribute.

metric

dictionary

Set metric for destination routing protocol.

bandwidth

integer

Metric value or Bandwidth in Kbits per second (Max Size 11).

igrp_delay_metric

integer

IGRP delay metric.

igrp_effective_bandwidth_metric

integer

IGRP Effective bandwidth metric (Loading) 255 is 100%.

igrp_mtu

integer

IGRP MTU of the path.

igrp_reliability_metric

integer

IGRP reliability metric where 255 is 100 percent reliable.

metric_type

string

Type of metric for destination routing protocol.

Choices:

  • external

  • internal

  • type-1

  • type-2

nssa_only

boolean

OSPF NSSA Areas.

Choices:

  • no

  • yes

null_interface

string

Output Null interface.

origin

string

BGP origin code.

Choices:

  • egp

  • igp

  • incomplete

path_selection

string

Path selection criteria for BGP.

Choices:

  • all

  • backup

  • best2

  • multipaths

tag

integer

Tag value for destination routing protocol.

weight

integer

BGP weight for routing table.

route_map

string

Route-map name.

running_config

string

This option is used only with state parsed.

The value of this option should be the output received from the NX-OS device by executing the command show running-config | section ‘^route-map’.

The state parsed reads the configuration from running_config option and transforms it into Ansible structured data as per the resource module’s argspec and the value is then returned in the parsed key within the result.

state

string

The state the configuration should be left in.

With state replaced, for the listed route-maps, sequences that are in running-config but not in the task are negated.

With state overridden, all route-maps that are in running-config but not in the task are negated.

Please refer to examples for more details.

Choices:

  • merged ← (default)

  • replaced

  • overridden

  • deleted

  • parsed

  • gathered

  • rendered

Notes

Note

  • Tested against NX-OS 9.3.6.

  • Unsupported for Cisco MDS

  • This module works with connection network_cli and httpapi.

Examples

# Using merged

# Before state:
# -------------
# nxos-9k-rdo# show running-config | section "^route-map"
# nxos-9k-rdo#

- name: Merge the provided configuration with the existing running configuration
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 10
            action: permit
            description: rmap1-10-permit
            match:
              ip:
                address:
                  access_list: acl_1
              as_path: Allow40
              as_number:
                asn: 65564

          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity1
                  - BGPCommunity2
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
                    - AllowPrefix2
            set:
              dampening:
                half_life: 30
                start_reuse_route: 1500
                start_suppress_route: 10000
                max_suppress_time: 120

      - route_map: rmap2
        entries:
          - sequence: 20
            action: permit
            description: rmap2-20-permit
            continue_sequence: 40
            match:
              ipv6:
                address:
                  prefix_lists: AllowIPv6Prefix
              interfaces: "{{ nxos_int1 }}"
            set:
              as_path:
                prepend:
                  as_number:
                    - 65563
                    - 65568
                    - 65569
              comm_list: BGPCommunity

          - sequence: 40
            action: deny
            description: rmap2-40-deny
            match:
              route_types:
                - level-1
                - level-2
              tags: 2
              ip:
                multicast:
                  rp:
                    prefix: 192.0.2.0/24
                    rp_type: ASM
                  source: 203.0.113.0/24
                  group_range:
                    first: 239.0.0.1
                    last: 239.255.255.255
    state: merged

# Task output
# -------------
#  before: []
#
#  commands:
#    - "route-map rmap1 permit 10"
#    - "match as-number 65564"
#    - "match as-path Allow40"
#    - "match ip address acl_1"
#    - "description rmap1-10-permit"
#    - "route-map rmap1 deny 20"
#    - "match community BGPCommunity1 BGPCommunity2"
#    - "match ip address prefix-list AllowPrefix1 AllowPrefix2"
#    - "description rmap1-20-deny"
#    - "set dampening 30 1500 10000 120"
#    - "route-map rmap2 permit 20"
#    - "match interface Ethernet1/1"
#    - "match ipv6 address prefix-list AllowIPv6Prefix"
#    - "set as-path prepend 65563 65568 65569"
#    - "description rmap2-20-permit"
#    - "continue 40"
#    - "set comm-list BGPCommunity delete"
#    - "route-map rmap2 deny 40"
#    - "match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM"
#    - "match route-type level-1 level-2"
#    - "match tag 2"
#    - "description rmap2-40-deny"
#
#  after:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40

# After state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

# Using replaced
# (for the listed route-map(s), sequences that are in running-config but not in the task are negated)

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Replace route-maps configurations of listed route-maps with provided configurations
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity4
                  - BGPCommunity5
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
            set:
              community:
                local_as: True
    state: replaced

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - route-map rmap1 deny 20
#    - no match community BGPCommunity1 BGPCommunity2
#    - match community BGPCommunity4 BGPCommunity5
#    - no match ip address prefix-list AllowPrefix1 AllowPrefix2
#    - match ip address prefix-list AllowPrefix1
#    - no set dampening 30 1500 10000 120
#    - set community local-AS
#
#  after:
#    - route_map: rmap1
#      entries:
#        - sequence: 20
#          action: deny
#          description: rmap1-20-deny
#          match:
#            community:
#              community_list:
#                - BGPCommunity4
#                - BGPCommunity5
#            ip:
#              address:
#                prefix_lists:
#                  - AllowPrefix1
#          set:
#            community:
#              local_as: True
#
#    - route_map: rmap2
#      entries:
#        - action: permit
#          continue_sequence: 40
#          description: rmap2-20-permit
#          match:
#            interfaces:
#            - Ethernet1/1
#            ipv6:
#              address:
#                prefix_lists:
#                - AllowIPv6Prefix
#          sequence: 20
#          set:
#            as_path:
#              prepend:
#                as_number:
#                - '65563'
#                - '65568'
#                - '65569'
#            comm_list: BGPCommunity
#
#        - action: deny
#          description: rmap2-40-deny
#          match:
#            ip:
#              multicast:
#                group_range:
#                  first: 239.0.0.1
#                  last: 239.255.255.255
#                rp:
#                  prefix: 192.0.2.0/24
#                  rp_type: ASM
#                source: 203.0.113.0/24
#            route_types:
#            - level-1
#            - level-2
#            tags:
#            - 2
#          sequence: 40
#

# After state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 deny 20
#   description rmap1-20-deny
#   match community BGPCommunity4 BGPCommunity5
#   match ip address prefix-list AllowPrefix1
#   set community local-AS
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

# Using overridden

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Override all route-maps configuration with provided configuration
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity4
                  - BGPCommunity5
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
            set:
              community:
                local_as: True
    state: overridden

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - route-map rmap1 deny 20
#    - no match community BGPCommunity1 BGPCommunity2
#    - match community BGPCommunity4 BGPCommunity5
#    - no match ip address prefix-list AllowPrefix1 AllowPrefix2
#    - match ip address prefix-list AllowPrefix1
#    - no set dampening 30 1500 10000 120
#    - set community local-AS
#    - no route-map rmap2 permit 20
#    - no route-map rmap2 deny 40
#
#  after:
#  - route_map: rmap1
#    entries:
#    - sequence: 20
#      action: deny
#      description: rmap1-20-deny
#      match:
#        community:
#          community_list:
#          - BGPCommunity4
#          - BGPCommunity5
#        ip:
#          address:
#            prefix_lists:
#            - AllowPrefix1
#      set:
#        community:
#          local_as: True
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"
# route-map rmap1 deny 20
#   description rmap1-20-deny
#   match community BGPCommunity4 BGPCommunity5
#   match ip address prefix-list AllowPrefix1
#   set community local-AS

# Using deleted to delete a single route-map

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Delete single route-map
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
    state: deleted

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - no route-map rmap1 deny 20
#
#  after:
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

# Using deleted to delete all route-maps from the device running-config

# Before state:
# ------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Delete all route-maps
  cisco.nxos.nxos_route_maps:
    state: deleted

# Task output
# -------------
#  before:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40
#
#  commands:
#    - no route-map rmap1 permit 10
#    - no route-map rmap1 deny 20
#    - no route-map rmap2 permit 20
#    - no route-map rmap2 deny 40
#
#  after: []
#
# After state:
# ------------
# nxos-9k-rdo# sh running-config | section "^route-map"

- name: Render platform specific configuration lines with state rendered (without connecting to the device)
  cisco.nxos.nxos_route_maps:
    config:
      - route_map: rmap1
        entries:
          - sequence: 10
            action: permit
            description: rmap1-10-permit
            match:
              ip:
                address:
                  access_list: acl_1
              as_path: Allow40
              as_number:
                asn: 65564

          - sequence: 20
            action: deny
            description: rmap1-20-deny
            match:
              community:
                community_list:
                  - BGPCommunity1
                  - BGPCommunity2
              ip:
                address:
                  prefix_lists:
                    - AllowPrefix1
                    - AllowPrefix2
            set:
              dampening:
                half_life: 30
                start_reuse_route: 1500
                start_suppress_route: 10000
                max_suppress_time: 120

      - route_map: rmap2
        entries:
          - sequence: 20
            action: permit
            description: rmap2-20-permit
            continue_sequence: 40
            match:
              ipv6:
                address:
                  prefix_lists: AllowIPv6Prefix
              interfaces: "{{ nxos_int1 }}"
            set:
              as_path:
                prepend:
                  as_number:
                    - 65563
                    - 65568
                    - 65569
              comm_list: BGPCommunity

          - sequence: 40
            action: deny
            description: rmap2-40-deny
            match:
              route_types:
                - level-1
                - level-2
              tags: 2
              ip:
                multicast:
                  rp:
                    prefix: 192.0.2.0/24
                    rp_type: ASM
                  source: 203.0.113.0/24
                  group_range:
                    first: 239.0.0.1
                    last: 239.255.255.255
    state: rendered

# Task Output (redacted)
# -----------------------
#  rendered:
#    - "route-map rmap1 permit 10"
#    - "match as-number 65564"
#    - "match as-path Allow40"
#    - "match ip address acl_1"
#    - "description rmap1-10-permit"
#    - "route-map rmap1 deny 20"
#    - "match community BGPCommunity1 BGPCommunity2"
#    - "match ip address prefix-list AllowPrefix1 AllowPrefix2"
#    - "description rmap1-20-deny"
#    - "set dampening 30 1500 10000 120"
#    - "route-map rmap2 permit 20"
#    - "match interface Ethernet1/1"
#    - "match ipv6 address prefix-list AllowIPv6Prefix"
#    - "set as-path prepend 65563 65568 65569"
#    - "description rmap2-20-permit"
#    - "continue 40"
#    - "set comm-list BGPCommunity delete"
#    - "route-map rmap2 deny 40"
#    - "match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM"
#    - "match route-type level-1 level-2"
#    - "match tag 2"
#    - "description rmap2-40-deny"

# Using parsed

# parsed.cfg
# ------------
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap1 deny 20
#   match community BGPCommunity1 BGPCommunity2
#   match ip address prefix-list AllowPrefix1 AllowPrefix2
#   description rmap1-20-deny
#   set dampening 30 1500 10000 120
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete
# route-map rmap2 deny 40
#   match ip multicast source 203.0.113.0/24 group-range 239.0.0.1 to 239.255.255.255 rp 192.0.2.0/24 rp-type ASM
#   match route-type level-1 level-2
#   match tag 2
#   description rmap2-40-deny

- name: Parse externally provided route-maps configuration
  cisco.nxos.nxos_route_maps:
    running_config: "{{ lookup('file', './fixtures/parsed.cfg') }}"
    state: parsed

# Task output (redacted)
# -----------------------
#  parsed:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#     - action: deny
#       description: rmap1-20-deny
#       match:
#         community:
#           community_list:
#           - BGPCommunity1
#           - BGPCommunity2
#         ip:
#           address:
#             prefix_lists:
#             - AllowPrefix1
#             - AllowPrefix2
#       sequence: 20
#       set:
#         dampening:
#           half_life: 30
#           max_suppress_time: 120
#           start_reuse_route: 1500
#           start_suppress_route: 10000
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#
#     - action: deny
#       description: rmap2-40-deny
#       match:
#         ip:
#           multicast:
#             group_range:
#               first: 239.0.0.1
#               last: 239.255.255.255
#             rp:
#               prefix: 192.0.2.0/24
#               rp_type: ASM
#             source: 203.0.113.0/24
#         route_types:
#         - level-1
#         - level-2
#         tags:
#         - 2
#       sequence: 40

# Using gathered

# Existing route-map config
# ---------------------------
# nxos-9k-rdo# show running-config | section "^route-map"
# route-map rmap1 permit 10
#   match as-number 65564
#   match as-path Allow40
#   match ip address acl_1
#   description rmap1-10-permit
# route-map rmap2 permit 20
#   match interface Ethernet1/1
#   match ipv6 address prefix-list AllowIPv6Prefix
#   set as-path prepend 65563 65568 65569
#   description rmap2-20-permit
#   continue 40
#   set comm-list BGPCommunity delete

- name: Gather route-maps facts using gathered
  cisco.nxos.nxos_route_maps:
    state: gathered

#  gathered:
#   - route_map: rmap1
#     entries:
#     - action: permit
#       description: rmap1-10-permit
#       match:
#         as_number:
#           asn:
#           - '65564'
#         as_path:
#           - Allow40
#         ip:
#           address:
#             access_list: acl_1
#       sequence: 10
#
#   - route_map: rmap2
#     entries:
#     - action: permit
#       continue_sequence: 40
#       description: rmap2-20-permit
#       match:
#         interfaces:
#         - Ethernet1/1
#         ipv6:
#           address:
#             prefix_lists:
#             - AllowIPv6Prefix
#         sequence: 20
#         set:
#           as_path:
#             prepend:
#               as_number:
#               - '65563'
#               - '65568'
#               - '65569'
#           comm_list: BGPCommunity
#

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key

Description

after

dictionary

The resulting configuration model invocation.

Returned: when changed

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

before

dictionary

The configuration prior to the model invocation.

Returned: always

Sample: “The configuration returned will always be in the same format\n of the parameters above.\n”

commands

list / elements=string

The set of commands pushed to the remote device.

Returned: always

Sample: [“route-map rmap1 permit 10”, “match as-number 65564”, “match as-path Allow40”, “match ip address acl_1”, “description rmap1-10-permit”, “route-map rmap1 deny 20”, “match community BGPCommunity1 BGPCommunity2”]

Authors

  • Nilashish Chakraborty (@NilashishC)